Port Information; Device Information; Video Destination Port Properties Window; Stream Information - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
8.8.2. Port Information
The most important information and settings of the input port are available in the Port information section.
Settings
▪ HDCP setting (Enable / Disable) #hdcp
Signal Info
All important audio and video information (e.g. HDCP status, resolution, total size, pixel clock, color space,
embedded audio information, e.g.) are available in the signal info section.
Emulated EDID
EDID-related information is displayed in the section.
Tools
▪ Frame Detector - The tool displays the frame information of the original stream coming from the input
port before a possible rescaling / frame rate conversion.
8.8.3. Device Information
The most important information and settings of the transmitter are available in the Device information section.
Settings
▪ Device label: the default label is the MAC address of the device but it can be changed to any unique
name. #label #devicelabel
▪ MAC address;
▪ Operation mode: showing the current operation mode, it can be transmitter, receiver or transceiver.
The operation mode can be changed in the
▪ Identify unit: Clicking on the button makes the four front panel LEDs blink in green for 10 seconds. The
feature helps to identify the device itself in the rack shelf or on the desk.
▪ Device properties: Clicking on the button opens the properties windows of the endpoint device. See the
details:
– For Transmitter (TX) operation mode in the
– For Transceiver (TRX) operation mode in the
Restart unit: clicking on the button makes rebooting the device (the same as disconnecting from the
▪
power source and reconnecting again).
▪ Update firmware: clicking on the button makes launching the firmware update of the endpoint device by
the MMU. See more details about it in the
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
Device Map.
#identifyme
Transmitter Mode section.
Transceiver Mode section.
#reboot #restart
Endpoint Upgrade - Centralized Firmware Upgrade
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
8.9. Video Destination Port Properties Window
Clicking on a destination port the properties panel opens on the right side. Clicking on the
properties section opens in new window.
8.9.1. Stream Information
The most important information and settings of the stream are available in the Stream information section.
Settings
▪
Stream naming;
▪ Enabled: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
section.
▪ Stream source: information about the currently connected stream and the ID of the source device.
▪ Disconnect stream: clicking on the button results the source stream is disconnected from the output
port.
Tile icon: choose an icon which is the most suitable with the source/destination device connected to
▪
the endpoint.

Video destination port properties window

#streamenable
76 76
icon the