Release Notes Of The Firmware Packages - Lightware UMX-TPS-TX120 User Manual


  
11. Appendix
11.10. Release Notes of the Firmware Packages
v1.5.0b4
Release date: 2021-05-17
New feature:
▪ Added property to indicate FeaturePackVersion (Advanced Control pack v3)
▪ Added AND operator for Event Manager Conditions (Advanced Control pack v3)
▪ Added Condition triggering for Event Manager (Advanced Control pack v3) for UMX-TPS-TX140-Plus
and UMX-TPS-TX140K only!
▪ Added Condition detect on property change to anything in Event Manager (Advanced Control pack v3)
▪ Added Variable handling for Event Manager (Advanced Control pack v3) for UMX-TPS-TX140-Plus and
UMX-TPS-TX140K only!
▪ Added Permanent TCP clients with configurable target IP address, and Message recognizer for TCP
clients (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-TPS-TX140K only!
▪ Added LW3 command-salvo over Http POST (protocol.lw3) (Advanced Control pack v3) for UMX-TPS-
TX140-Plus and UMX-TPS-TX140K only!
▪ Added Http message sending with sendHttpPost and sendHttpPut (target server IP, target filepath,
header, body) (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-TPS-TX140K only!
▪ Added method to send Wake On LAN packet (Advanced Control pack v3)
▪ Added cleartext login function (disabled by default) (Advanced Control pack v3) for UMX-TPS-TX140-
Plus and UMX-TPS-TX140K only!
▪ Added MAC filtering (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-TPS-TX140K
only!
▪ Added IP port and services filtering (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-
TPS-TX140K only!
▪ Added Macro capability (running partial device preset with tags) (Advanced Control pack v3) for UMX-
TPS-TX140-Plus and UMX-TPS-TX140K only!
▪ Added new method for CEC control button sendClick (Advanced Control pack v3) for UMX-TPS-TX140-
Plus and UMX-TPS-TX140K only!
▪ Added LMDMP (Lightware Multicast Device Management Protocol) feature.
▪ Modified DeviceLabel property default text to LW_<productname>_<serialnum>
▪ Added properties in root node: FirmwareVersion, PackageVersion, MacAddress.
▪ Minor performance improvements and modifications.
▪ Added Network HostName property (default: lightware-<serialnum>).
▪ Added new ConnectedSource property for media output nodes.
▪ Introduces \u201c--test\u201d option for the update CLI command. This \u201cupdate test mode\
u201d checks communication with the device over various protocols. One can perform this verification
step before actually starting the device update.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
v1.4.0b8
Release date: 2019-07-23
New feature:
▪ KVM transmission between USB HID (Human Interface Devices, e.g. keyboard, mouse, presenter over
PC or a Laptop) for UMX-TPS-TX140K only!
▪ Added support for FP-UMX-TPS-TX120-GES, FP-UMX-TPS-TX130-GES product variants.
▪ New bootloader is used, which allows the connected TPS-RX95's to be updated remotely.
▪ Crosspoint properties and methods changed. Warning: If you are using an external controller for this
device via LW3 protocol, the recent changes in property and node names may result in difficulties to
control the TPS device with the latest firmware.
▪ WP-UMX-TPS-TX100-WHITE products are now supported.
▪ The method of storing device settings in EEPROM is updated, which may result in losing all the
settings, logs and user EDID's after updating to 1.1.0. The LDU software contains a plug-in to help you
keep the actual settings after firmware update.
▪ Event Manager configuration became more user friendly: actions can be triggered manually for testing
and the user interface shows if any of the conditions are met.
▪ Event Manager updated: time delay can be configured between condition and action, a condition can
trigger multiple actions at the same time, inverse condition can be used.
▪ 3840x2160p60 YUV4:2:0 factory EDID added.
▪ IR command injection is now supported: data received on a specific TCP port is transmitted as IR
signal, and the received IR frames are also sent to this TCP connection.
▪ Fan can be controlled manually with setFan() LW3 method.
▪ EDID node properties changed: PreferredResolution, MonitorName and AudioInfo properties are added
▪ The device is able to identify IR commands on either the local or link IR input port. This feature can be
connected to Event Manager, which means, that the device can be programmed to do various actions,
if a specific IR command is detected.
▪ TCP and UDP messages can be sent by the device to control projectors and any other devices. This
feature can also be used with Event Manager.
▪ Audio and video port names are changed: 'I' is used for inputs and 'O' is used for outputs, instead of 'P'.
▪ New EDID driver is used, the content of some factory EDID's are changed according to EDID 1.3 and
1.4 standard.
▪ Autoselection connect and disconnect delay can be configured via LW3 methods.
▪ Firmware platform library updated
▪ Sending IR codes (SendProntoHex e.g. send max. 200 Byte IR code with Event Actions) for UMX-TPS-
TX140-Plus only!
▪ Added 'Disable default button function' option to support button customization in Event Manager
▪ Modified RS-232 modes to support SendMessage in Control mode
▪ CEC - sendCEC command (e.g. turn on the TV with Event Actions) for WP-UMX-TPS-TX130-Plus only!
178