4. Software Control - Lightware Device Contoller
4.5. Terminal Menu
The general purpose of this serial terminal is intended mainly for testing and debugging purposes.
Nevertheless, when the window is open, the automatically executed commands can be followed on the
screen.
Terminal window
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
4.6. Settings menu
4.6.1. Device information
Basic information about the extender, such as type, serial number, firmware and hardware revisions are
displayed on this tab.
The Device Information tab
22