7. LW3 Programmers' Reference
7.24.2. Query the Validity of a Dynamic EDID
Command and Response
#edid
ç GET·/EDID/D/<dynamic>.Validity
pr·/EDID/D/<dynamic>.Validity=<logical_value>
æ
Parameters
The
<logical_value>
can be true or false.
Example
ç GET /EDID/D/D1.Validity
æ pr /EDID/D/D1.Validity=true
7.24.3. Query the Preferred Resolution of an User EDID
Command and Response
ç GET·/EDID/U/<user>.PreferredResolution
pr·/EDID/U/<user>.PreferredResolution=<resolution>
æ
Example
ç GET /EDID/U/U2.PreferredResolution
æ pr /EDID/U/U2.PreferredResolution=1920x1080p60.00Hz
7.24.4. Emulating an EDID to an Input Port
Command and Response
ç CALL·/EDID:switch(<dynamic|user|factory>:<emulated>)
æ mO·/EDID:switch
Example
ç CALL /EDID:switch(F49:E2)
æ mO /EDID:switch
7.24.5. Emulating an EDID to All Input Ports
Command and Response
ç CALL·/EDID:switchAll(<dynamic|user|factory>)
æ mO·/EDID:switchAll
Example
ç CALL /EDID:switchAll(F47)
æ mO /EDID:switchAll
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.24.6. Copy an EDID to User Memory
Command and Response
ç CALL·/EDID:copy(<dynamic|emulated|factory|user>:<user>)
æ mO·/EDID:copy
Example
ç CALL /EDID:copy(D1:U1)
æ mO /EDID:copy
The EDID of the last connected sink of D1 (Output 1) has been copied to U1.
7.24.7. Deleting an EDID from User Memory
Command and Response
ç CALL·/EDID:delete(<user>)
æ mO·/EDID:delete
Example
ç CALL /EDID:delete(U1)
æ mO /EDID:delete
7.24.8. Resetting the Emulated EDIDs
Command and Response
ç CALL·/EDID:reset()
æ mO·/EDID:reset
Example
ç CALL /EDID:reset()
æ mO /EDID:reset
Calling this method switches all emulated EDIDs to factory default one. See the table in the
section.
140
Factory EDID List