Figure 24: Example "Device-Specific Parameters" Dialog With Profibus Dp; Table 56: Configuration Of 750-375(/025-000) And 750-377(/025-000) - WAGO 750-564 Manual

WAGO-I/O-SYSTEM 750
750-564 4AO U/I

Table 56: Configuration of 750-375(/025-000) and 750-377(/025-000)

GSD Entry
Module
750-564 4AO, U/I 4AO, UINT16[4] O, 16 bit
7.3.2 Parameterization of 4AO U/I
7.3.2.1 PROFIBUS DP Fieldbus Couplers/Controllers
750-333(/0xx-000), 750-833(/0xx-000)
Based on the associated PROFIBUS GSD files, the I/O module can be supplied
with operating parameters. The settings can be found under the category
"Device-Specific Parameters."

Figure 24: Example "Device-Specific Parameters" Dialog with PROFIBUS DP

7.3.2.2 PROFINET IO Fieldbus Couplers
750-375(/025-000), 750-377(/025-000)
Based on the associated PROFINET GSD files, the I/O module can be supplied
with operating parameters, which are divided into the categories "General
Module/Channel Parameters," "Specific Module/Channel Parameters" and,
depending on the selected submodule, an optional category "PROFIenergy
Parameters."
Submodule
4AO, UINT16[4] O, 16 bit, PE
4AO, INT16[4] O, 15 bit
4AO, INT16[4] O, 15 bit, PE
4AO, {UINT8, UINT16}[4] I/O,
16 bit
4AO, {UINT8, UINT16}[4] I/O,
16 bit, PE
4AO, {UINT8, INT16}[4] I/O,
15 bit
4AO, {UINT8, INT16}[4] I/O,
15 bit, PE
Commissioning
PA length Data type
[Byte]
I O
UINT16
n/a 8
INT16
{UINT8,
UINT16}
12 12
{UINT8, INT16}
75
Inst.
4
Manual
Version 1.0.0