Telecontrol Via Sms; Setting Or Resetting A Digital Output; Table 40: Example Of Parameters For Set Do - WAGO 761-114 Manual

WAGO-TO-PASS® 761
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
8.2.1

Telecontrol via SMS

8.2.1.1

Setting or Resetting a Digital Output

To set or reset a digital output, send an SMS with the text that is entered under
Activation text or Deactivation text for the output to the TO-PASS
module. The TO-PASS
SMS containing the identifier and the transmitted text.
Example:

Table 40: Example of parameters for Set DO

Parameter
Activation text
Deactivation text
Turn-off time
Send an SMS with the text "DOUT1=1" to the TO-PASS
switch on output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=1 OK!".
Send an SMS with the text "DOUT1=0" to the TO-PASS
switch off output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=0 OK!"
Manual
Version 1.0.0
®
telecontrol module acknowledges the command with an
Setting
DOUT1=1
DOUT1=0
00:00:00
®
telecontrol module acknowledges the
®
telecontrol module acknowledges the
Operation
®
telecontrol
®
telecontrol module to
®
telecontrol module to
89