Telecontrol Via Sms; Setting Or Resetting A Digital Output; Table 40: Example Of Parameters For Set Do - WAGO -TO-PASS 761 Manual

82 Operation
Pos : 37.21 /Serie 761 (T O-PASS)/Bedienen/Bedi enen 761-1xx/-2xx/-3xx F ernwir ken per SMS - Ü berschrift 3 @ 3\mod_1223634493687_21.doc x @ 23853 @ 3 @ 1
8.2.1

Telecontrol via SMS

Pos : 37.22 /Serie 761 (T O-PASS)/Bedienen/Bedi enen 761-1xx/-2xx/-3xx F ernwir ken SM S DO s etz en/rüc ksetzen @ 3\mod_1223634560890_21.doc x @ 23856 @ 4 @ 1
8.2.1.1

Setting or Resetting a Digital Output

To set or reset a digital output, send an SMS with the text that is entered under
Activation text or Deactivation text for the output to the TO-PASS
module. The TO-PASS
SMS containing the identifier and the transmitted text.
Example:

Table 40: Example of parameters for Set DO

Parameter
Activation text
Deactivation text
Turn-off time
Send an SMS with the text "DOUT1=1" to the TO-PASS
switch on output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=1 OK!".
Send an SMS with the text "DOUT1=0" to the TO-PASS
switch off output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=0 OK!"
Pos : 37.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
®
telecontrol module acknowledges the command with an
Setting
DOUT1=1
DOUT1=0
00:00:00
®
telecontrol module acknowledges the
®
telecontrol module acknowledges the
WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
®
telecontrol
®
telecontrol module to
®
telecontrol module to
Version 2.0.0
Manual