78
Operation
8.2.1
Telecontrol via SMS
8.2.1.1
Setting or Resetting a Digital Output
To set or reset a digital output, send an SMS with the text that is entered under
Activation text or Deactivation text for the output to the TO-PASS
module. The TO-PASS
SMS containing the identifier and the transmitted text.
Example:
Table 35: Example of parameters for Set DO
Parameter
Activation text
Deactivation text
Turn-off time
Send an SMS with the text "DOUT1=1" to the TO-PASS
switch on output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=1 OK!".
Send an SMS with the text "DOUT1=0" to the TO-PASS
switch off output 1. The TO-PASS
command with an SMS with the identifier and the text "DOUT1=0 OK!"
761-111 Telecontrol Module Compact, 2 AI
®
telecontrol module acknowledges the command with an
Setting
DOUT1=1
DOUT1=0
00:00:00
®
telecontrol module acknowledges the
®
telecontrol module acknowledges the
WAGO-TO-PASS® 761
®
telecontrol
®
telecontrol module to
®
telecontrol module to
Manual
Version 2.0.0