Diagnostics; Diagnostics Via Display Elements; Table 23: Signal Evaluation Per Channel, Control Status 0; Table 24: Signal Evaluation Per Channel, Control Status 1 - WAGO 750-508/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-508/040-000 2DO 24 VDC 2A/ Diagn XTR

Diagnostics

7
7.1

Diagnostics via Display Elements

The display elements of the I/O modules provide information about possible
statuses and cases of error. The tables below contain signal evaluations,
depending on the control statuses:

Table 23: Signal Evaluation per Channel, Control Status 0

Status LED
Off
Off
*)
The diagnostics can only be fully interpreted by analyzing the displayed diagnostics in conjunction
with the current operating status.

Table 24: Signal Evaluation per Channel, Control Status 1

Status LED
Green
Off
*)
The diagnostics can only be fully interpreted by analyzing the displayed diagnostics in conjunction
with the current operating status.
Error LED Possible interpretation
Normal operation, output follows the output bit
Off
Short circuit at output to ground
No load connected to the output
Red Short circuit at output to 24 V
Overtemperature on overload
Error LED Possible interpretation
Normal operation, output follows the output bit
Off No load connected to the output
Short circuit at output to 24 V
Short circuit at output to ground
Red
Overtemperature on overload
Diagnostics 39
*)
*)
*)
*)
*)
*)
*)
*)
Manual
Version 1.3.0