Table of Contents
Advertisement
K3NC
Engineering Data
3 DERATING CURVE FOR SENSOR POWER SUPPLY
Ambient temperature (°C)
Nomenclature
3 K3NC
1. SV Display
2. PV Display
3. Comparative Output
Status Indicators
4. SV Display Status
5. ESC Key
6. Mode Key
Name
1. SV display
2. PV display
3. Comparative output
status indicators
4. SV display status
5. ESC Key
6. Mode Key
7. Status indicator
8. Teaching indicator
9. RESET/TEACH Key
10. Up Key and Shift Key
4
OUT5
OUT4
OUT3
OUT2
1
2
3
OUT
4
5
OUT1
Functions
Displays the set value or parameter. Available for Set Value LED Models only.
Displays the process value or parameter.
Displays the status of comparative output.
Indicates which comparative set value is currently on the SV display.
Used to return to the RUN mode from the Setting, Protect or Maintenance mode.
Used to enter the Setting mode.
Used to allow the PV display to indicate set values sequentially. Available for Basic Models only.
Used to indicate set values sequentially on the SV display. Available for Set Value LED Models only.
RESET: Lit when the RESET input is ON.
PROG: Lit or flashes while parameters are being set.
Lit when the teaching function is enabled and flashes when the Intelligent Signal Processor is in
teaching operation.
The counting value is reset by pressing this key.
Teaching is available when the teaching function is enabled.
The digit being set is scrolled by pressing the Shift Key. The set value increases by 1 whenever the up
key is pressed.
Note: The derating curve shown is for standard installation.
The derating curve depends on the mounting direction.
K3NC
7. Status Indicators
8. Teaching Indicator
9. RESET/TEACH Key
10. Up Key and Shift Key
Advertisement
Table of Contents
