Connecting Peripheral Devices - Omron Z500-SW2T Setup Manual

SECTION 1
Wiring and Connection

1-3 Connecting Peripheral Devices

This section shows how to connect peripheral devices to the Z500.
NOTICE
1-3-1 Connecting a Console
1-3-2 Connecting a Monitor
MONITOR
Z500
24
Setup Manual
• Be sure to turn OFF the power supply before connecting or disconnecting cables. The
peripheral device may be damaged if connected or disconnected with the power supply
turned ON.
• The connector for each peripheral device is capped when the Z500 is shipped.
For a connector not in use, leave the cap in place to protect against dust, dirt, and static
electricity.
Connect the Z300-KP console to the Z500's CONSOLE connector.
CONSOLE
Connect the F150-VM monitor cable to the Z500's MONITOR connector.
ESC TRIG ENT
SHIFT
CONSOLE
POWER
SYNC