Monitoring While Viewing The Measurement Status - Omron Z300 V3 Setup Manual

Monitoring While Viewing the Measurement Status

1-1 Monitoring While Viewing the Measurement Status
Monitoring suited to the application is possible at every stage from installation
and adjustment to operation and maintenance.
22
For details on the display, refer to page 12 in the Operation Manual.
Z300
Sensor
The status of laser beam images can be
displayed on the monitor screen.
It is possible to make fine adjustments to
the measurement position and to confirm
that the light density is not excessive or
insufficient.
Linear sensor controller-style digital display
is also possible.
Waveforms with measurement values ar-
ranged in chronological order can be dis-
played and so the shapes of the workpieces
moving along the line can be checked.
Section 1-1
Monitor
POWER
SYNC
SCN0 RUN 0.48ms
NEAR
BRIGHT
+ Sensor 0
+
LV [ 12]
PEAK[199]
Sensor 1
LV
PEAK[---]
DARK
OUT 0 HI LO ZERO OFF
+001.6070
mm
PASS
SCN0 RUN 0.48ms
+001.6070
mm
PASS
RO OFF
OUT 0
HI=+005.0000 mm
LO=-005.0000 mm
SCN0 RUN 0.48ms
+
H
L
thru
ZERO OFF
OUT 0
+001.6070 mm PASS
[---]