7 Motor Monitoring with the K6CM Devices and the Software Tool
7-2-4
Measuring and Monitoring Completed
When the trigger mode is "external trigger" or "internal trigger", when the termination condition of mea-
surement and monitoring is satisfied, the measured value of the numerical display LCD on the front of
the K6CM is retained. Also, the status at the end of measuring and monitoring is retained for the alarm
bar and transistor outputs 1 and 2.
At this time, "MON" in the status display on the front of the K6CM goes out.
7 - 8
K6CM Motor Condition Monitoring Device User's Manual (N219)