Installation And Wiring - Omron K7GE-MG User Manual

(2) Installation and Wiring

Connect three Probe Units to one Main Unit.
•
Remove the right connector cover of the Main Unit and the left
connector cover of the Probe Units.
Use the Probe Unit on the right end with the right connector cover
attached.
•
Join the connectors together. Make sure that the connectors are
connected firmly without any gap between the Units.
Mounting to DIN Track.
•
Pull down the DIN Track mounting hook under the Main Unit and
Probe Units to mount the Units on the DIN Track.
•
Secure with the DIN Track mounting hook.
•
Install an end plate* on the left and right sides.
Be sure to connect the Units together before mounting them on the DIN
Track.
Insulation Resistance Monitoring Device User's Manual (N224)
* Sold separately
End plate
2 Procedure
2
End plate
DIN Track mounting hook
2 - 3