Status:operation:condition - Keysight U2722A Programmer's Reference Manual

10 STATus Subsystem

STATus:OPERation:CONDition?

Syntax

STATus:OPERation:CONDition?

This query command returns the value of the Operation Status Condition register.
The Condition register is a read-only register, which holds the live (unlatched)
operational status of the instrument. Reading the Operation Condition register
does not clear it.
For more information on the SCPI Status System, refer to
NOTE
system diagram"
Remarks
The following table lists the bit definitions for the Operation Status registers.
Bit number
0 to 1 Not Used
2 DTG1-tran
3 DTG2-tran
4 DTG3-tran
5 WTG1-tran
6 WTG2-tran
7 WTG3-tran
8 to 15 Not Used
82
on page 21.
Decimal value Definition
0 0 is returned.
4 The transient system has received a trigger signal and operation is running in
channel 1.
8 The transient system has received a trigger signal and operation is running in
channel 2.
16 The transient system has received a trigger signal and operation is running in
channel 3.
32 The transient system is waiting for a trigger in channel 1.
64 The transient system is waiting for a trigger in channel 2.
128 The transient system is waiting for a trigger in channel 3.
0 0 is returned.
Keysight U2722A/U2723A Programmer's Reference
Chapter 2, "Status