[Source:]Current:limit - Keysight U2722A Programmer's Reference Manual

9 SOURce Subsystem

[SOURce:]CURRent:LIMit

Syntax
[SOURce:]CURRent:LIMit <value>, (@<ch>)
This command sets the maximum bounds on the output current value. Output
current level will be clamped to the limit value if the current level has exceeded
the bounds set.
[SOURce:]CURRent:LIMit? (@<ch>)
This will query the current limit setting.
Parameters
Item Type
NR1
<ch>
NRf
<value>
Returned Query Format
<NR3>
Examples
The following command sets the current limit to 0.8 A on channel 1.
CURR:LIM 0.8, (@1)
The following query returns the programmed current limit on channel 1.
CURR:LIM? (@1)
Typical Response: +8.000000E-01
See Also
[SOURce:]VOLTage:LIMit
54
Range of values
1 through 3
The maximum value is dependent on the current range set
Keysight U2722A/U2723A Programmer's Reference
Defaul t value
Required parameter
Required parameter