Front Frame Assembly; Removal - Keysight n9020a Service Manual

Assembly Replacement Procedures

Front Frame Assembly

Front Frame Assembly

Removal

Make sure any connectors on the front panel are removed.
NOTE
1. Remove the instrument outer case. Refer to the Instrument Outer
If the analyzer has Option PRC, Portable Configuration, and you want to
NOTE
remove the bail handle and bumpers from the front frame, refer to the
Handle Removal (Option PRC)"
2. Refer to
Figure 14-76 Front Frame Assembly Removal
Caseremoval procedure.
Figure 14-76. Using the T-10 driver, remove the eight screws (1),
four on each side, to detach the Front Frame Assembly from the chassis.
section on page 533.
531
"Bail