Removal Of Option Exm, External Mixing Parts From Original Front Frame - Keysight N9010AK-MTU Installation Note

Removal of Option EXM, External Mixing Parts from Original Front Frame

1. Refer to Figure 19. Disconnect semi-rigid coax cable W27 from the Ext Mixer connector using a
5/16 inch open-end wrench. W27 will be re-used.
Figure 19 Disconnect W27 from Ext Mixer Connector
Installation Note N9010-90072
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
This procedure applies only to instruments with Option EXM, External Mixing
33