Figure 6-3 Hardware Configuration Window; Figure 6-4 Hardware Selection (Simatic 300) - Siemens COMBIMASTER 411 Operating Instructions Manual

CONFIGURATION FOR S7 PLC
6. Select the appropriate PLC type. In the example the SIMATIC 300 is
selected (see Figure 6-3).
7. Highlight the SIMATIC 300(1) folder and double-click the "Hardware" icon
in the Right-hand window (see Figure 6-3). The "HW Config" window is
then displayed.
Figure 6-3
8. From the Insert Menu, select Hardware Components, this then opens the
hardware library in the right-hand window (see Figure 6-4).
9. Select and expand the SIMATIC 300 (see Figure 6-4).
Figure 6-4
50
Hardware Configuration Window
Hardware Selection (SIMATIC 300)
PROFIBUS Communication Module
Issue 03/02
Operating instructions
6SE6400-5AV00-0BP0