Setting The I-Αppli Standby Screen; Stand-By Set - NTT docomo FOMA N702iS Manual

Launching i-αppli with the Infrared data
exchange function
This setting allows the i-αppli software to be
launched when an i-αppli launch signal is received
during Infrared data exchange.
i79
"Receive"
1
the i-αppli launch signal
Launching i-αppli from the Bar code reader
This setting allows the software to be launched from
a bar code when a bar code scanned by the Bar
code reader includes an i-αppli software launch
specification.
i
1 "Bar code reader"
"New" Scan the bar code
Select an item for launching the
2
software "YES"
<Stand-by set>
Setting the i-αppli Standby Screen
You can set a selected i-αppli software as the
standby screen on your FOMA terminal. When the
i-αppli standby screen is displayed, the "
icon appears at the bottom of the screen.
● Some software applications cannot be set as the
standby screen.
1 Software list screen (P.254)
(FUNC) "Software setting"

"Stand-by set"

N
Only 1 i-αppli can be set as the i-αppli standby screen.
The " " icon is displayed for software set in the standby
screen.
If software that communicates is set as the standby screen, it
may not run correctly when problems such as poor signal
quality occur.
If you select "OFF" for "Stand-by net" in "Software setting",
note that you may not be able to receive timely information.
When an i-αppli standby screen is set, the image set for the
"Stand-by display" in "Display setting" (P.121) is not displayed.
If you display the standby screen while a menu function is
running, the standby screen selected for "Stand-by display" in
"Display setting" appears even when an i-αppli standby
screen has been set.
If you turn the FOMA terminal off and then on again while you
are setting an i-αppli standby screen, a message appears
asking whether to launch the i-αppli standby screen.
If you set "All lock" (P.143) or "PIM lock" (P.148) while the
i-αppli standby screen is displayed, the i-αppli standby screen
quits. Once you release "All lock" or "PIM lock", the i-αppli
standby screen reappears.
Receive
" or "
p
o (Finish)
"ON"
Activating the i-αppli standby screen
You can activate the software application set as the
i-αppli standby screen.
On i-αppli standby screen t
1
The i-αppli is activated and the "
bottom of the screen changes to a flashing "
" " icon.
Deselecting the i-αppli standby screen
<Deselect i-αppli standby screen>
● Deselecting while activating the i-αppli
1 While activating the i-αppli
second or longer) or y
"Terminated"
2
■ To cancel deselecting
"Cancel"
■ To cancel deselecting and display the i-αppli
standby screen
"Ended"
"
● Deselecting the i-αppli standby screen
while it is displayed
i
1
stand-by display"
"Terminate"
2
■ To cancel deselecting
"End"
N
If you deselect the i-αppli standby screen, the image set for
"Stand-by display" in "Display setting" appears in the standby
screen.
" or " " icon at the
Ｓｔａｒｔ
t (1
"Yes"
"i-αppli settings"
"Yes"
" or
Ｅｎｄ
"End
259