NTT docomo FOMA N702iS Manual page 448

W-TCP Settings
"W-TCP settings" is a "TCP parameter setup tool" to optimize the transmission capability of
TCP/IP when "Packet communication" is carried out on the FOMA network. The communication
settings by this software are required to make the most of communication performance of the
FOMA terminal.
Setting up and canceling optimization
<For Windows XP>
Optimization settings for each dial-up are possible for Windows XP.
Start the program
1
(1) If you are operating from "FOMA PC 設
定ソフト " (FOMA PC setting software)
Click "W-TCP 設定 " (W-TCP settings) of " マ
ニュアル設定 " (Manual setup) after starting
the program.
(2) If you are operating from the task-tray
Click the "W-TCP icon" in the task-tray to start
the program.
Proceed with the following
2
Close all the programs open and follow the screen instructions to restart the PC. The optimized
system settings become valid after the restart.
(1) If the system settings have not been
optimized
Click " 最適化を行う" (Optimize).
"W-TCP 設定（ダイヤルアップ）" (W-TCP
settings (dial-up)) screen appears. If you
select the dial-up to be optimized and click " 実
行 " (Execute), system and dial-up settings will
each be optimized.
(2) If the system settings have been
optimized
"W-TCP 設定（ダイヤルアップ）" (W-TCP
settings (dial-up)) screen appears.
If there are some changes, make changes to
the settings.
27
Left-click