NTT docomo FOMA N702iS Manual page 132

<Call time display>
Displaying the Call Time During Calls
You can specify whether the FOMA terminal displays the call time or not during voice and videophone calls.
● If the call time exceeds "19 hours, 59 minutes, 59 seconds", the count restarts from "0 second".
● The displayed call time is intended solely as a guide and may not be the accurate figure.
● Call time is not counted during i-mode or packet communication.
i48 "ON"
1
■ To disable displaying the call time
"OFF"
N
The displayed call time is reset to 0 second each time you switch between voice call and videophone call. However, after
switching the calls, if you finish the call with videophone, the displayed call time is the total of voice and videophone calls.
<Font>
Changing the Font
Default setting Type: Font 1 Thickness: Medium
You can change the characters displayed on the screen to your favorite font (typeface).
i66 Select any item:
1
......Selects the font type from "Font 1/Font 2". A text sample of the selected font appears on the bottom of the
Type
screen.
Thickness ......Selects the thickness from "Thin/Medium/Bold". A text sample of the selected thickness appears on
the bottom of the screen.
N
This function is not applied for the text used for clock display and phone number input screen.
You can only change to "Font 2" for alphabets (full-pitch or half-pitch), numbers (full-pitch or half-pitch), hiragana and katakana (full-
pitch or half-pitch), some symbols, Greek characters and Russian characters. All other characters such as kanji are displayed by "Font
1".
130
Default setting
ON