NTT docomo FOMA N702iS Manual page 65

<Pause dial>
Sending Push Signals Quickly
Sending push signals from your FOMA terminal enables you to send messages to QUICKCAST
services such as ticket ordering and bank balance requests.
Storing dialing data as pause dial record entries
You can store dialing data to send as push signals beforehand into a pause dial record entry. Inserting a pause
(p) into the dialing data allows you to send data with a separation where a pause lies.
● You can only store one dialing data entry, consisting of up to 128 characters.
● Dialing data can contain numbers from 0 to 9, the # and * symbols, and pauses (p).
● You cannot enter pauses (p) in succession or at the beginning of the dialing data.
i84
1
The "Pause dial screen" appears.
■ If there is dialing data already stored
The stored dialing data appears.
o(Edit) Enter the dialing data
2
Press 0 to 9, q and w to enter the dialing data.
■ To enter a pause (p)
w (for 1 second or longer)
Pause dial screen
Pause dial screen (P.63) p(FUNC) Select any item:
1
Edit......Edits the dialing data.
Send pause dial...... Enter the phone number of the destination
Whenever you press
Delete......Deletes the stored dialing data.
* Pocket bell (beeper) of NTT DoCoMo has been renamed to "QUICKCAST" since January, 2001.
r
or d (Send), the dialing data up to a pause (p) is transmitted.
Ｐａｕｓｅ ｄｉａｌ
Ｅｄｉｔ
Function menu P.63
r d
or (Dial)
*
and to use
ＦＵＮＣ
Pause dial
63