Changing The Display Design - NTT docomo FOMA N702iS Manual

Table of Contents

Advertisement

<Display light>
Setting the Display and Keypad Lighting
Default setting
Lighting: ON (lit) + Saver (5-minute wait) Charging: Standard Area: LCD+Keys
Brightness: Level 2
i70 Select any item:
1
Lighting...... Display light "ON" or "OFF"
Enter the waiting time for the Power saver mode (02 to 20 minutes in 2 digits) when you set the Power saver mode to
"ON".
・Setting the normal lighting settings for the display light to "OFF" displays the "
・ If you set the Power saver mode to "ON", the standby screen turns off when the specified waiting time has elapsed
(Power saver mode).
Charging...... "Standard" or "All time ON"
Area......Selects the lighting area of the backlight.
"LCD+Keys" or "LCD"
Brightness......Selects the brightness from Level 3 to Level 1.
N
You can also turn the display light on or off by holding down 5 for 1 second or longer.
When "Lighting" is set to "ON", the display light turns on when a call is received and lights for about 15 seconds when you turn the
FOMA terminal on, press one of the keys, or unfold the FOMA terminal. The display light also stays on while you are using the camera
or playing a movie or i-motion. If you select "OFF", the display light does not turn on. However, the display light turns on during movie
shooting regardless of the "Lighting" setting.
If no operation is performed for about 15 seconds, the brightness of the display light is set to "Level 1" to enhance the charging
efficiency even when "All time ON" is set for charging.
When the body of a mail or a Message R/F is displayed, the time for which the display light stays on varies depending on the length of
the message.
If any key is pressed during the Power saver mode, the Power saver mode is canceled.
When you set short waiting time for the Power saver mode, the FOMA terminal may enter the Power saver mode before ending the
playback of flash movie or animation.
<Display design>

Changing the Display Design

Default setting
<Body color: Mineral Water> Color pattern: Pattern 1 Background 1: OFF Background 2: Pattern 1
Battery level icon/Reception level icon: Mineral Water
<Body color: Cafe Latte> Color pattern: Pattern 2 Background 1: OFF Background 2: Pattern 1 Battery
level icon/Reception level icon: Cafe Latte
<Body color: Strawberry Milk> Color pattern: Pattern 4 Background 1: OFF Background 2: Pattern 3
Battery level icon/Reception level icon: Strawberry Milk
You can change the background, etc, of the text, background, the upper and lower sections of the display, and
the software keys.
i86 Select any item:
1
Color
pattern......Selects the color pattern from Pattern 1 to Pattern 5.
Background 1
......Selects the background pattern for the icon display area for the upper section and software key
display area for the lower section of the display from "OFF (not displayed)/Mineral Water 1/Mineral Water 2/Cafe Latte
1/Cafe Latte 2/Strawberry Milk 1/Strawberry Milk 2/Pattern 7/Pattern 8".
Background
2......Selects the background pattern for the software keys from "Pattern 1 to Pattern 3".
Battery level icon/Reception level icon
Milk/The Little Mermaid". The standard icon (
styleplus(common to all body colors).
*1 : The selected pattern appears on the display during the setting.
124
Power saver mode "ON" or "OFF"
......Selects each icon design from "Mineral Water/Cafe Latte/Strawberry
) is added when you scan the QR code supplied with the
" icon on the standby screen.
*1
*1
*1

Advertisement

Table of Contents
loading