Message Screen - NTT docomo FOMA N702iS Manual

Message screen

● For the functions other than the followings, refer to
the function menu of the "Text entry (edit) screen"
(P.348).
Message screen (P.211, 247)
1
(FUNC) Select any item:
Decorate mail ......"The basic operations to decorate",
"Decoration menus" → P.215, 216
......Shoots the image to insert into
Activate camera
the mail. → P.162
Property ......Displays the file name and size of an
image inserted into the message when the cursor is at
the left of the image.
......Returns the entered text or message
Undo
decoration to its status in the previous step.
Preview......Displays a preview of the message.
N
<Activate camera>
The size of the images shot using the camera function is set
to Mail (S)(128 × 96).
<Undo>
After you press "Undo" and return the text or message
decoration to its one previous step, you cannot cancel "Undo".
If you return from the message screen to the new mail screen
and then go back to the message screen, you cannot "Undo".
(After selecting "Preview" on the message screen to preview
the text, you can undo the step.)
<Preview>
When you have included a phone number, e-mail address,
URL or a link to an i-αppli in an i-mode mail message, it is
underlined in the preview screen. However, the Phone To (AV
Phone To), Mail To and Web To functions cannot be used.
Sending an still image you shot during a
call <Speed photo mail>
This function allows you to send a still image shot
during a voice call or a still image still image in your
FOMA terminal to the other party.
● To use Speed photo mail, the phone number and e-
mail address of the person you are talking to must be
stored in the phonebook under the same memory
number beforehand.
<Example: To send a still image taken as you speak>
In-call screen (P.54)
1
"Speed photo mail"
■ To send a still image saved on the FOMA
terminal
"Speed photo mail" "My picture"
Images that cannot be sent cannot be selected.
You can only send "Mail(L)" or "Mail(S)" size images
that are 9,000 bytes or less when they are attached
to mails.
p
p (FUNC)
"Photo mode"
d(Record)
2
The camera shoots a still
image.
The FOMA terminal emits the
shutter sound as it shoots a still
image.
You can use the
functions to adjust the brightness
or set the image size before
shooting a still image → P.163
"The Speed photo mail image
screen" appears.
d (Send)
3
Confirmation message about sending appears.
■ To send the mail after saving
p (FUNC)
"Save & send"
d (Select)
"OK"
4
■ When multiple e-mail addresses are regis-
tered
Select the mail address to send.
Please be considerate of the privacy of
individuals around you when taking and
sending photos using camera-equipped
mobile phones.
N
This function cannot be used in the following cases:
・ When the other party's phone number and e-mail address
are not stored in the phonebook
・ When the other party's phone number and e-mail address
are stored in the phonebook in "Secret mode" or "Secret
only mode"
・ When the called party has not been provided a caller ID
(User unset or Not supported, etc.)
・ When Restrict dialing is set and the other party's phone
number is not designated in the Restrict dialing settings
・ When PIM lock is set
・ During packet communication in data communication
・ When the Draft mailbox is full
・ During call waiting
・ When the call was made during software updating
Mail sent with this function is stored in the Outbox with your
phone number set to the subject.
If "SXGA(1,280 × 960)", "VGA(640 × 480)", "CIF(352× 288)",
"Screen(240 × 345)" or "Stand-by(240 × 320)" is selected in
"Select size", the setting reverts to "Mail (L)(176 × 144)" when
this function is launched.
If you change the "Select size" while this function is running,
only the "Mail(L)(176×144)" and "Mail (S)(128× 96)" formats
can be selected.
Continued on next page
camera
Ｓｅｎｄ ＦＵＮＣ
Speed photo mail image
Function menu P.214
Ｓｐｅｅｄ ｐｈｏｔｏ ｍａｉｌ
ＤｏｃｏｍｏＴａｒｏ
Ｓｅｎｄ？
ｄｏｃｏｍｏ．ｔａｒｏ．△△＠ｄｏｃ
ｄｏｃｏｍｏ．ｔａｒｏ．△△△＠ｄｏ
Ｑｕｉｔ
213