NTT docomo FOMA N702iS Manual page 455

Enter any name in the "名前 "
5
(Name) column and click "OK"
"sample" is entered here as an example.
Select "FOMA N702iS" from " 接
6
続方法 " (Connection method),
and click "OK"
Click "キャンセル " (Cancel) after the
connection screen appears.
If a COM port of "FOMA N702iS" can be
selected
When Properties of the COM port is
displayed, click "OK".
In this example, "COM3" is selected. See
"Checking the COM port" (p.30) to confirm
the actual COM port number of "FOMA
N702iS" to be selected in "接続方法 "
(Connection method).
If a COM port of "FOMA N702iS" cannot be
selected
Click " キャンセル " (Cancel) to close the "接
続の設定 " (Connection Settings) screen and
then follow the steps:
(1) Select " ファイル " (File) menu → " プロパ
ティ " (Properties)
(2) Select "FOMA N702iS" in the "接続方法"
(Connection method) column of the "接続
の設定 " (Connection Settings) tab on the
"sampleのプロパティ " (sample
Properties)
(3) Uncheck "国/地域番号と市外局番を使う
" (Use the Country/Region Code and
Area Code)
(4) Click "OK"
34