NTT docomo FOMA N702iS Manual page 58

Switching Voice Call to Videophone Call (Caller)
The caller can switch between voice call and videophone call.
● If the handset of the other party is the FOMA terminal supporting the call switch, "
voice call, and you can switch between the voice call and videophone call. (This function is available in
communications between voice call and videophone call switchable terminals.)
● You can switch the voice call only when you are the caller.
● To switch the call, the receiver needs to set "Indicate V-phone" to notify the switch beforehand. → P.94
In-call screen d(
1
Select "NO" in the "Indicate V-phone" screen to return to the in-call screen.
While the voice call is switched to videophone call, the screen which indicates that the calls are being switched
appears and the voice guidance is played.
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
ＦＵＮＣ
４ｓ
１７：２３
N
You can switch the videophone call to the voice call. → P.88
It is possible to switch repeatedly between voice call and videophone call.
It takes about 5 seconds to switch the calls. The signal quality may affect how long it takes.
You cannot switch between the videophone and voice calls while talking in the following cases:
・ When "Call waiting" is activated.
・ When the other party is holding a call or activating "Record message".
The call time displayed is reset to 0 second each time the calls are switched. However, after switching, if the videophone call is
finished, the displayed call time is the total of voice call and videophone call.
If you try to switch the call, the message appears on the other party's videophone screen asking to select the image to be sent, camera
image or substitute image. → P.69
When the call is switched, the first dialed call is registered to the Redial/Dialed calls records. The first received call is registered to the
Received calls record.
If the caller is using packet communication (including i-mode), the packet communication is canceled to switch to videophone.
If the other party is using packet communication (including i-mode), you receive the message "No Switch" meaning you cannot switch
the calls. The voice call continues.
Depending on the other party's communication conditions such as manipulation or the signal quality, you may not be able to switch the
calls and the call may be canceled.
You are not charged while "SWITCHING VOICE/VIDEO" is displayed.
If you perform the switching operation, the amount of call charge displayed in "Call data" (P.313) may differ from the one you will pay.
After switching to the videophone call, the hands-free operation turns on or off according to the "Hands-free switch" setting, regardless
of the hands-free setting before switching. → P.94
56
) "YES"
Ｉｎｄｉｃａｔｅ Ｖ−ｐｈｏｎｅ
Ｖｉｄｅｏ−ｐｈｏｎｅ
Ｃｈａｎｇｉｎｇ？
［Ｔａｌｋｉｎｇ］
［Ｃｈａｎｇｉｎｇ］
１ｍ３０ｓ
ＹＥＳ
ＮＯ
Ｓｅｌｅｃｔ
１０ｓ
１７：２３
Ｃｈａｎｇｅ ＦＵＮＣ
" is displayed during the
［Ｃｈａｎｇｉｎｇ］