Page 2: Before Using The Foma Terminal
DoCoMo nor the certifiers as listed herein make any representation and warranty as for the security in the use of SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifiers shall be responsible for any such damage or loss.
Page 3: In The Manual
Search for main functions of SO906i, such as new and useful functions. List of menus (P.438) The menu items, which appear on the display of the FOMA SO906i, and default settings at the time of purchase are listed. Quick Manual (P.504) The basic operations of the FOMA terminal are explained briefly.
Page 4: Table Of Contents
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.494) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. P.50 To the descr- Network search mode ..
Page 5 Typical layout of the operating instructions page Function name Section title Notifying the Recipient of Your Phone Number <Notify caller ID> Index When placing a call, your phone number can be shown in the display of the An outline and objectives of recipient’s phone you are calling.
Page 6: Easy Search
Easy Search You can search the function that you want to know with simple words. Useful Functions for a Call your phone number Sending or keeping it anonymous ...Notify caller ID (P.50) Switching to videophone during a voice call ....Chg. to videophone (P.57) on hold Putting a current call ..........Holding (P.69)
Page 7: Infrared Communication
Useful Functions for the Camera Panorama shoot Performing the ........Panorama (P.145) recording size Changing the ...........Select size (P.149) photo light Turning on the ..........Photo light (P.153) microSD card Saving an image directly to the ....Select save to (P.156) Displaying image a recorded .........My picture (P.306) For Secure Operations of the FOMA Terminal...
Page 8 Information on Using the Manual and How to Look up in the Manual ............. 1 Easy Search ............... 4 Contents Main Functions of the FOMA SO906i ......8 Making Full Use of SO906i ! ........10 Safety Precautions (Observe Strictly) ....... 12 Handling Precautions ..........18 Intellectual Property Right ........
Page 9: Gps Function
Data communication, Before using data communication, Preparations and flow of data transfer (OBEX™ communication), Preparations and flow of data communication, AT commands, About the supplied CD-ROM, Introduction of DoCoMo keitai datalink Overseas Use Overview of international roaming, Available services, Place call, Receive call, Network search mode, PLMN setting, Operator name display, Roaming Guidance, Oversea service, and so on…...
Page 10: Main Functions Of The Foma So906I
Main Functions of the FOMA SO906i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11: Motion Sensor
Media Launcher Stand-by Books The menu, dedicated to the multimedia functions There are 16 unique preinstalled Flash contents which activating easily by selecting from the five display various information such as bits of knowledge, functions; Photo, Movie, 1Seg, Music, and Full general knowledge, and picture books wave after Browser, is employed (P.36).
Page 12: Service
Making Full Use of SO906i ! Videophone Chaku-moji You can have a face-to-face conversation You can send a message that is displayed with a person in the distance. You can hear in the recipient’s Incoming call display the person’s voice from the speaker without while calling the recipient.
Page 13: Music Player
Phone No. : 090-AAAA-AAAA Phone No. : 090-BBBB-BBBB mail addresses, and special mode Address : XXA@docomo.ne.jp Address : XXB@docomo.ne.jp Phonebook : For A mode Phonebook : For B mode functions to make one mobile phone work like using two mobile phones separately.
Page 14: Safety Precautions (Observe Strictly)
Safety Precautions Indicates compulsory actions in (Observe Strictly) accordance with instructions. For safe and proper use of the FOMA terminal, please read the “Safety Precautions” prior to Indicates to remove the power plug use. Keep the Manual in a safe place for future from the outlet.
Page 15 FOMA USB Cable with Charge Function Failure to do so may cause the device to 01/02 overheat, explode, or catch fire, or the Contact our service counter (DoCoMo battery pack to leak. shop, etc.) for information on other compatible products.
Page 16 Always keep the FOMA terminal away Handling the FOMA Terminal from your ear when you talk setting the hands-free function. Also, when WARNING you play game or play back music connecting the Earphone/Microphone Do not aim the infrared data por t to the FOMA ter minal, adjust the volume adequately.
Page 17 In rare cases, using the FOMA terminal CAUTION may interfere with the operation of electronic devices in some types of vehicle. Do not swing the FOMA ter minal If there is any interference, do not use the around by holding the antenna or strap. FOMA terminal when driving for safety reasons.
Page 18 Do not throw the battery pack into fire. Do not charge the wet battery pack. Doing so may cause the battery pack to Doing so may cause the battery pack to leak, overheat, explode, or catch fire. overheat, catch fire, or explode. Don’t Don’t Do not stick a nail into the battery pack,...
Page 19 Do not touch the cord of the adapter Handling the UIM (including the charger) or the power outlet with wet hands. No wet CAUTION Doing so may cause electric shock. hands Use the adapter only on the specified Please be careful not to touch a cut power supply and voltage.
Page 20: Handling Precautions
 The color liquid crystal display of the FOMA it safely. terminal has a special coating on it for better  Under no condition will DoCoMo be held liable visibility. Do not use unnecessary force to wipe the for any damaged or lost data saved in the FOMA display when you are cleaning it with a dry cloth.
Page 21  Under no condition will DoCoMo be held liable for any damaged or lost data saved in the UIM. period of time.
Page 22: Intellectual Property Right
“DCMX” logo, “iD” logo, and “HIGH SPEED” logo are the technology standard agreement of the specific trademarks or registered trademarks of NTT DoCoMo. wireless equipment based on the Radio Law. The  “Catch Phone (Call waiting service)” is a registered model plate of the FOMA terminal shows “...
Page 23  Windows Media ® is either a registered trademark Revocation does not affect unprotected content. or trademark of Microsoft Corporation in the United When you download licenses for protected content, States and/or other countries. you agree that Microsoft may include a revocation list with the licenses.
Page 24: Supplied And Optional Accessories
Supplied and Optional Accessories Supplied accessories FOMA SO906i Manual for FOMA SO906i (this manual) (w/warranty and back cover SO11) (w/Quick Manual P.504) Battery Pack SO02 FOMA SO906i CD-ROM ( “ M a n u a l f o r P C c o n n e c t i o n setting”...
Page 25: Before Using The Handset
Before Using the Handset Part Names and Functions ..................24 About the Style ......................28 Using the Displays ..................... 31 About the Illumination Indicator ................. 35 About the Media Launcher ..................36 Selecting the Menu ....................37 Using the UIM ......................40 Attaching and Removing the Battery Pack ..............
Page 26: Part Names And Functions
Part Names and Functions                                     ...
Page 27   Illumination Indicator /IC Card Lock Key (P.35)  Incoming Indicator/Charge Indicator In the stand-by display, press for over a second to lock the IC card function or cancel the lock. To cancel the Flashes when receiving a call/mail. It flashes when there lock, enter the Security code (P.245).
Page 28  TV Key Press to select an item of the guide display in the Media style (P.35). In the stand-by display, press for over a second to Operate the Music Player or Music&Video Channel activate 1Seg (P.270). with the FOMA terminal folded (P.358, 364). Press to select an item of the guide display in the ...
Page 29 How to Use the Motion Sensor Motion sensor is a function that allows you to operate several functions of the FOMA terminal by tilting, rotating, or tapping the FOMA terminal instead of being operated by the keypad.  The following functions can be operated by the Motion sensor. - While displaying an image (P.307) - While playing back the Music slide show (P.308) - While playing back a movie (P.313)
Page 30: About The Style
About the Style You can use the FOMA terminal in the Normal style and Media style in which the terminal is placed horizontally. Normal style Media style Speaker Speaker  You hear sounds from speakers of the When you watch 1Seg in the Media style, both side in the Normal style.
Page 31 Switching to Media style Hold the FOMA terminal Rotate the display 180 Fold the FOMA terminal. a n d o p e n t h e d i s p l ay degrees clockwise. straight. Cautions when rotating the display ...
Page 32 How to Use the 3 Step Stand You can enjoy 1Seg with three angles by placing the FOMA terminal horizontally in the Media style. How to place the 3 Step Stand Catch the dint portion with your finger Tip it until it stops. and tip it forward.
Page 33: Using The Displays
Using the Displays  For details on the icons in the Camera mode or while watching 1Seg, see P.142 or P.269 respectively.  The position of the clock in the display can be changed (P.111).  -    Clock (P.49, 111) Notification display (P.33) i-Channel Telop text (P.180)
Page 34  The i-mode center is full of Message R, Manner mode is set ( is pink) (P.108) Message F at the i-mode center/The Silent mode is set (P.108) i-mode center is full of Message R, the Original manner mode is set ( FOMA terminal is full of Message F blue) (P.108) ...
Page 35 The FOMA terminal’s display is manufactured based on the leading edge technologies, and some pixels unlit or lit may appear constantly in the display. This is not a malfunction. Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call.
Page 36 Icon Text information Description Check for update There is confirmation of a software update (P.477). Update notification The software update is necessary (P.475). Update schedule Downloading the software is complete. Overwrite the software with new one (P.475). Update completed The pattern definition auto-update was completed successfully (P.481).
Page 37: About The Illumination Indicator
Media style By following the guide display appeared on the lower side or right side of the display, use the Volume Up key/Volume Down key, the Channel Select Up key/Channel Select Down key, the shutter key, the TV key, and the PushTalk key. Display Operation Lower side of the display...
Page 38: About The Media Launcher
About Media Launcher Media Launcher is an operating display which can activate the multimedia functions of the FOMA terminal such as displaying an image, playing back a movie/i-motion, 1Seg, or Music Player easily. Press ) in the stand-by display. Normal style Media style Category Category...
Page 39: Selecting The Menu
If you delete or switch an image or video saved in the folder where the last recorded image or video is saved, an image or video being displayed may be changed. For the Media style or press to select a function and then press ...
Page 40 Kisekae menu Menu name Description My Selection Used to access My Selection. i-mode Used to access an i-mode and Full Browser functions. Mail Used to access an i-mode mail and SMS functions. i appli Used to access an i- ppli function. Phone Used to access mainly related to Phone such as Phonebook, Call record, PushTalk phonebook, and Record message.
Page 41 Selecting a Function from the Function Menu The Function menu is a menu that plays an auxiliary role for each function. Whenever the Function menu is available, [Func] appears in the guide display. Press to display a list of available Function menus. ...
Page 42: Security Codes
Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in the FOMA terminal to use it. Inserting/Removing When inserting/removing the UIM (FOMA card), make sure to power off and fold the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.
Page 43 You cannot set the UIM operation security function for data received using the infrared or iC communication, the microSD card, or data transfer (OBEX™ communication) function such as DoCoMo keitai datalink or images recorded with the built-in camera. If you use the UIM on another i-Channel-compatible terminal, the Telop text does not appear.
Page 44  If you should lose your UIM (green/white) or have it stolen abroad, please report it to DoCoMo and take steps to cancel the use of the UIM as soon as possible. For information on where to call, see “General Contact” on the backcover of this manual. Note that you are...
Page 45: Attaching And Removing The Battery Pack
Attaching and Removing the Battery Pack When attaching/removing the battery pack, make sure to power off and fold the FOMA terminal.  If you attach the battery pack forcibly, the terminal on the FOMA terminal may be damaged.  Holding too hard or attaching/removing the back cover in a manner other than described below may damage it.
Page 46: Charging The Foma Terminal
If you continue using i- ppli, talking on the videophone, or watching 1Seg for a long period of time with the battery being charged, the life of the battery pack may become shorter. Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
Page 47 Estimated charging time/Battery time (ab.: about, h: hour, m: minute) Charging time 1Seg (AC adapter) watching time ab. 140m ab. 250m Network 3G/GSM setting Continuous stand-by time Continuous call time FOMA/3G Moving state : ab. 390h Voice call : ab. 230m Videophone call : ab.
Page 48 How to Charge the FOMA Terminal Charge the battery pack using the optional Desktop Holder SO10 with the FOMA AC Adapter 01/02 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter. The battery pack cannot be charged alone. Insert the connector of the AC adapter horizontally with the engraved side facing up into the terminal (the side labeled “AC...
Page 49: Checking The Battery Level .......................................... .........
When not using the AC adapter for a long period of time, remove its power plug from the AC outlet. Make sure that the phone strap, etc. does not get caught in between the FOMA terminal and the desktop holder. The fuse (2.0 A) of the DC adapter is a consumable part.

Page 50: Powering On/Off
Powering On/Off <Power on/off>  When you power on the FOMA terminal, the screen informing to execute the software update automatically may appear (P.473). Press (PWR) for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and an animation is displayed.
Page 51: Setting The Date And Time
<Date/time> You can set the date and time either by automatically correcting the time based on the time information obtained from the DoCoMo network or by manually setting the time. Example: Correcting the time automatically From the Menu, select [Settings]...
Page 52: Notifying The Recipient Of Your Phone Number
Notifying the Recipient of Your Phone Number <Notify caller ID> When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling.  The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID.
Page 53 To switch the Own number display between the A and B modes when 2in1 is set to the Dual mode Press (Number A)/ (Number B). You cannot originate a PushTalk call from the Own number display of the B mode. When you replace the UIM (From 2in1 subscriber to 2in1 subscriber) while 2in1 is used, to obtain a correct Number B, you need to perform the 2in1 function OFF (P.418) first, and then set the 2in1 to ON again.
Page 54 Press and save each item at the Detail display. Icon Settings Select an image from My picture/i-motion of the Data Box or record one.  You can set the following files. Category File format File size Image size My picture GIF/JPEG Max.
Page 55 Voice/Videophone Calls Placing Voice/Videophone Calls What is Videophone?....................54 Placing a Voice/Videophone Call ................55 Switching to/from Voice/Videophone Call .... <Chg. to videophone/Chg. to voice call> Using the Redial/Received Record ....... <Redial record/Received record> Using the Chaku-moji ................<Chaku-moji> Changing the Caller ID Setting ON/OFF for an Individual Call ....<186/184>...
Page 56  Mode You can use the videophone function between : Mode for operating full-body actions of Chara- DoCoMo videophone compatible terminals. : Mode for operating parts actions of Chara- You can use videophone to talk to the recipient/ caller while looking at each other’s image. You...
Page 57 Press to hang up. Placing a Voice/ Videophone Call See P.61 for sending the Chaku-moji and P.62 for placing a voice or videophone call by specifying the condition. Check the radio wave condition and enter a For a voice call, you can also place it in the order phone number.
Page 58 If you use the FOMA ter minal to place a Using the Hands-free Function videophone call to emergency numbers (110, 119, and 118), it automatically switches to voice When you switch to the hands-free operation call dialing. during a call, you can hear the caller’s voice When you place a videophone call to a terminal from the speaker and talk hands-free.
Page 59 Entering a pause “P” Switching to/from Voice/Videophone If you enter “P (pause)” between the phone Call <Chg. to videophone/Chg. to voice call> number and touch-tones when you book a ticket or play back your home answering A caller can switch to/from voice/videophone m a c h i n e , t h e t o u c h - t o n e s a re s e n t b y call during a call.
Page 60 Select [Yes] and press You are not charged while “Chg. to videophone”/ “Chg. to voice call” is displayed. Every time you switch, the call duration starts from 0 seconds. When you finish the call, the total call duration is displayed for each of the voice and videophone calls.
Page 61  Call type To send mail You can send mail to a person whose phone Placed/received voice call / Missed number and mail address are saved in the voice call (“ ” appears in case of Phonebook. Move the cursor to a call record and the Dial frequency record) from the Function menu, select [Reply by mail] Placed/received videophone call /...
Page 62 Deleting the Redial/Received Record  For more details about the Chaku-moji or compatible models, see the DoCoMo’s website or “Mobile The call records are retained even if the FOMA Phone User’s Guide Network services ”. terminal is powered off. If you do not wish ...
Page 63: Editing Messages
Editing Messages Dialing a Call with a Message You can save up to 10 Chaku-moji messages. You can place a voice or videophone call together with a Chaku-moji message. From the Menu, select [Settings] [ M a n a g e m e n t ] [ N W S e r v i c e s ] Enter a phone number in the stand-by [Chaku-moji]...
Page 64 Select another call condition and press Changing the Caller ID Setting ON/ (Call). OFF for an Individual Call <186/184> You can choose whether to notify a recipient of your phone number (caller ID) every time you place a call.  The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your caller ID.
Page 65 W i t h W O R L D C A L L , y o u c a n p l a c e a n a prefix is saved.) international call from a DoCoMo mobile [Int’l prefix]: phone.
Page 66 Auto assist number. You can also add an method. international access number by selecting [Int’l See the NTT DoCoMo’s website for information prefix] at the Option call/SMS display when you about countries to which a videophone call place a call.
Page 67 Select an input field and press Placing a Call by Specifying a Sub-address <Sub-address setting> You can set to place a call to a specific phone or communication device by specifying a sub- address. Enter a name in the name field and ...
Page 68 Setting the Alarm When Reconnecting Talking Hands-free While a Dropped Call Driving <Reconnect alarm> <Hands-free mode> This function automatically reconnects the call You can place or receive a voice call using a interrupted during a voice, videophone, or hands-free device by connecting the FOMA PushTalk call due to the radio wave condition, terminal to a device such as the In-Car Hands- such as in a tunnel or between buildings, right...
Page 69 Non-display Receiving a Voice/ Description reason Videophone Call Unavailable When a call is received from a caller who cannot notify the caller’s phone number, such When you receive a voice or videophone call, as from overseas and from an you are notified by flashing indicator, ring tone, o rd i n a r y p h o n e t h ro u g h c a l l vibrator, etc.
Page 70: To Receive A Call
Switching a Call to/from Pressing a Key on the Keypad Voice/Videophone Call to Receive a Call <Any key answer> A caller can switch between voice and You can set to answer a call by pressing a key videophone calls during a call. When the caller on the keypad instead of pressing when switches the voice call to the videophone...
Page 71: Putting A Call On Hold
Select the Setting when folded at [Voice Putting a Call on Hold call/V.phone]. during a Call <Holding> [Holding]: Put the call on hold. Both you and the recipient hear the Holding tone set at the holding The call can be put on hold during a voice or setting (P.70).
Page 72 When ready to answer the call, press Select a holding image from My picture of the Data Box at [V.phone hold image]. The On hold is canceled and you can talk.  You can set the following files. If you have signed up for the Voice Mail or Call File Forwarding Service, you can select [FWD to Category...
Page 73: Power Off
When the Public mode (Drive mode) is set Using the Public Mode  Even if there is an incoming call, the ring tone does (Power off) not sound and you cannot answer it. The notification <Public mode (Power off)> icon of missed call appears and the call is saved in the Received record.
Page 74 1 If you set the ring time of the Voice Mail or Call Operation for an incoming call when network Forwarding Service to 0 seconds, the guidance services and the Public mode (Drive mode/ for the Public mode is not played back and a Power OFF) are set call is not saved in the Received record, either.
Page 75 When Receiving a Call Recording Caller’s Messages When Unable to Answer Calls <Record message/Videophone message> The answering message is played back to the caller after the ring tone sounds When the Record message/Videophone for the set duration. message is set, the FOMA terminal can record To talk to the caller a caller’s message when you are unable to Press...
Page 76 E n t e r t h e t i m e b e fo r e s t a r t i n g t h e Recording a Caller’s Message When Unable answering message at [To answer]. to Answer a Call Just Receiving <Quick record message>...
Page 77 Playing Back/Deleting a Deleting a Record Message/ Voice Memo Record Message/Voice Memo You can record up to three record messages, You can play back or delete a recorded record three videophone messages, and three message/videophone message and voice voice memos. Delete unnecessary record/ memo (P.388).
Page 78 Select the method, press , and enter Setting the Videophone the phone number. Operation <Videophone setting> Press (V.phone). Setting the Display to Be Used in a Videophone Call You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call.
Page 79 Select [ON]/[OFF] at [Camera image]. Redialing by Voice Call When the [ON]: Videophone Is Not Connected Send a camera image to the recipient when you place a videophone call. When the videophone call is not connected, [OFF]: the FOMA terminal automatically redials Send a substitute image to the recipient when by voice call.
Page 80 Setting How to Answer a Setting Notice for Switching between Voice Videophone Call during i-mode and Videophone Calls <Videophone switch notice> You can set how to answer a videophone You can set whether to notify the recipient/ c a l l re c e i v e d d u r i n g i - m o d e o r p a c k e t caller that the FOMA terminal is capable of communication, for example, sending or switching between voice and videophone calls.
Page 81 PushTalk What is PushTalk? ..................... 80 Originating a PushTalk Call ..................81 Adding a Member during PushTalk Communication ..........82 Receiving a PushTalk Call ..................83 Saving Data in the PushTalk Phonebook ..............84 Originating a PushTalk Call Using the PushTalk Phonebook ........85 Deleting a PushTalk Phonebook Entry ..............
Page 82: What Is Pushtalk
(speak), you are charged for PushTalk  communication.   For more details on PushTalk or compatible models, see the DoCoMo’s website or “Mobile Phone User’s Guide Network services ”. PushTalkPlus The PushTalkPlus is a service that allows you to ...
Page 83: Originating A Pushtalk Call
Originating a PushTalk Operations during PushTalk Communication Call Operation Key operation  You cannot originate a PushTalk call during a voice Speak When the floor is open, you can speak call, a videophone call, or data communication, or only while you press and hold while the B mode is set in 2in1.
Page 84: Adding A Member During Pushtalk Communication
You cannot use PushTalk to place a call to Adding a Member during emergency numbers (110, 119, and 118). PushTalk Communication You cannot set whether to notify the caller ID when you originate a PushTalk call even if you add “186/184”. If you originate a PushTalk call, you can add a The setting whether to originate a PushTalk call member during PushTalk communication.You...
Page 85: Receiving A Pushtalk Call
Press (Call). When you receive a PushTalk call, press When the call is answered, it is switched to the hands- free operation that allows you to hear the recipient’s voice from the speaker. When you do not want to The FOMA terminal starts calling the selected answer the call member.
Page 86: Saving Data In The Pushtalk Phonebook
Setting a Group Saving Data in the PushTalk Phonebook When you save several members of the PushTalk phonebook in a group beforehand, You can save up to 1,000 members in the you can originate a PushTalk call to the saved PushTalk phonebook.
Page 87: Originating A Pushtalk Call Using The Pushtalk Phonebook
Saving a Member to a Group Originating a PushTalk Call Using the PushTalk Phonebook Press in the stand-by display and press (Group). If you save persons as members in the The Group list display appears. PushTalk phonebook, you can originate a Select a group and press PushTalk call to several persons.
Page 88: Deleting A Pushtalk Phonebook Entry
Originating a PushTalk Call from Deleting a PushTalk the Group Phonebook Entry Press in the stand-by display and You can delete members saved in the PushTalk press (Group). phonebook using three methods. Example: Deleting a member Press in the stand-by display. To delete several members From the Function menu, select [Delete] [Select&delete], select members, press...
Page 89: Using The Pushtalk Phonebook
Setting the Ring Time Using the PushTalk Phonebook If you select [OFF] for the Auto answer setting, <PushTalkPlus> set the ring time of the PushTalk call. You can connect to the network and use the From the Menu, select [Settings] PushTalkPlus service (P.80).
Page 90 Setting Whether to Receive a Setting the Operation for the FOMA Terminal PushTalk Call during i-mode Being Folded during PushTalk Communication You can set whether to receive a PushTalk You can end a call or switch a call to the call by disconnecting i-mode if there is any hands-free operation by folding the FOMA incoming PushTalk call during i-mode or...
Page 91 Phonebook Phonebooks the FOMA Terminal Can Use ..............90 Saving an Entry in the FOMA Terminal Phonebook ... <Add to FOMA terminal phonebook> Saving an Entry in the UIM Phonebook ......... <Add to UIM phonebook> Saving the Redial/Received Record in the Phonebook ..........95 <Group setting>...
Page 92 Data to be FOMA terminal Phonebooks the FOMA UIM phonebook saved phonebook Terminal Can Use Image to You can save one Des You cannot save be saved call display and one images. Des substitute image The FOMA terminal is equipped with two types for each phonebook of phonebooks, the FOMA terminal phonebook, entry.
Page 93 Please note that when you change models and change it. attempt to transfer the saved data to a new mobile phone at our service counter (DoCoMo Enter within 26 digits per phone number. You shop, etc.), you may not be able to copy it to the can save the pause (P), timer (T), “+”, “#”, and...
Page 94 Data Box or record a new one to be used  When you save a mail address as “phone as the Des call display that is displayed when number + Secret code@docomo.ne.jp” in placing/receiving a voice or videophone call, the Phonebook, if you save a Secret code,...
Page 95 Press and save each item at the Icon Settings Setting display. Select a ring tone from MUSIC/i-motion/ Melody of the Data Box to be used as the Des Icon Settings phone tone/Des mail tone that sounds when Select the Des substitute image to be sent receiving a voice or videophone call and right during a videophone call from My picture/ after receiving mail.
Page 96 Press (Complete). Save each item. The entered data is saved in the FOMA terminal Icon Settings phonebook. Enter a name within 10 full-width or 21 half- When 2in1 is set to the Dual mode width characters. If you use a mixture of full- The screen for confirming whether to change the width and half-width characters or half-width Phonebook 2in1 setting appears.
Page 97 Saving the Redial/Received Saving a Group <Group setting> Record in the Phonebook Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can A phone number saved in the record can be be saved in the UIM (FOMA card) phonebook. directly added to the Phonebook.
Page 98 Select a group icon at [ Select an entry and press Press and save the Des call display, Des phone tone, and Select phone Illum.  Follow the same steps as those for the Des call display, Des phone/mail tone, and Select phone/mail Illum.
Page 99: Searching The Phonebook
Searching the Phonebook Setting the Display of the Phonebook <Search phonebook> <Phonebook setting> You can search the desired data of the You can set the type of a phonebook to be Phonebook by entering a reading, memory displayed and font size to be used for the number, and phone number.
Page 100: Editing A Phonebook Entry
When an entry to be deleted is also saved in the Editing a Phonebook Entry PushTalk phonebook, it is automatically deleted from the PushTalk phonebook. When you delete <Edit phonebook> all data of the FOMA terminal phonebook, the Group setting of the PushTalk phonebook is reset From the Phonebook, select an entry and to the default setting.
Page 101 Dialing Quickly to Frequently Storing (Restoring/Updating) the Phonebook at the Called Numbers Data Security Service Center <2-touch dial> <Data Security Service> A call can be placed easily to the recipients You can use the Data Security Service to store saved in memory numbers from 000 to 009 by the FOMA terminal phonebook at the Data using a shortcut.
Page 102 To restore the FOMA terminal phonebook by downloading the Phonebook from the Data Security Service Center From the i-mode menu, select [ Menu] Menu] ] (Data Security) ] (Data Center), enter the i-mode password, and select [ ] (Download to mobile phone) [OK].
Page 103 Sound/Display/ Light Settings <Incoming set> Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..Setting the Ringer Setting the Sounds of the FOMA Terminal ........<Set basic tone> Adjusting the Volume of Caller’s Voice ............<Volume> <Sound effect> Adjusting the Volume While Playing Flash Movie .......
Page 104 Select an image from the Data Box at Setting the Ring Tone/Image/Indicator Color [Receiving img]. for Incoming Call and Mail <Incoming set>  You can set the following files. Incoming call/Incoming V.phone You can set a ring tone, ring volume, incoming File Category File size...
Page 105 Select a ring tone from MUSIC/i-motion/ Set a vibration pattern at [Vibrator]. Melody of the Data Box at [Ring tone].  You can set the following files. You can select a ® Chaku-Uta from [i-motion]. File Category File size Image size format MUSIC AAC-LC/...
Page 106: Foma Terminal
Preinstalled melodies Setting the Sounds of the Title Title FOMA Terminal 1 - 5 Dawn <Set basic tone> Snappy Beatz Pulsar You can set whether the sound effect that Thunderbolt Forest can be used when charging starts and is Symphony School Chime completed and 3D sound is played back Salut d’amour...
Page 107 Select a full charge sound at [Full charge Adjusting the Volume While sound]. Playing Flash Movie <Sound effect> Select from three types of start sounds, three types of completion sounds, and [Silent]. The sounds of the FOMA terminal are set. The sound volume while playing back a Flash To check a full charge sound ®...
Page 108 [Location notice]: Setting Whether to Prioritize the Set the operation to be performed when the current location is notified. i- ppli Sound <Pref. i ppli sound> [Loc. provide/accept]: Set the operation to be performed when you are You can set whether to prioritize the i- ppli requested to provide location information when sound when 1Seg, Music Player, and i- ppli the settings for using each service is set to “...
Page 109 Select a vibration pattern at [Vibrator]. Select the type of alarm tones and press [Pattern1]: Set a short intermittent vibration. The Quality alarm is set. [Pattern2]: If the radio wave condition becomes weak Set a long intermittent vibration. suddenly, the call may be disconnected with no [Link melody]: alarm.
Page 110 Functions of each mode Select [Yes] and press Original manner The Melody Call site is connected. Initial Setting Manner Silent Set each item. setting range  For details how to set, see the “Mobile Phone Vibrator Follow each Pattern1/ User’s Guide Network services ”. (P.103) 1 setting Pattern2/...
Page 111 Press during a voice call to set the Whisper Changing the Original Manner mode and press it again to cancel the Whisper mode. The operations of the Original manner can be customized. For the items you can set, see “Functions of each mode” (P.108). Changing the Manner Mode Example: Setting the battery alarm Settings...
Page 112 Select an image from My picture/i-motion Changing the Settings of the of the Data Box at [Stand-by]. Stand-by Display <Stand-by display>  You can set the following files. File Category File size Image size You can set an image for the stand-by display, format image quality, Calendar/Clock display, My picture GIF/...
Page 113 Press (Switch) and press (OK). Select [Arrangement setting] and press Every time you press (Switch), the Image quality changes in order of [Dynamic] [Normal] The screen for selecting a position appears. [Sharp]. Press (Change) to switch between calendar and clock, and then press to select a Select [Calendar/Clock] and press position to be displayed.
Page 114 Select a folder from My picture of the Setting the Stand-by Pictures Data Box at the field and press Several images in the specified folder can be  Up to five folders can be specified. displayed in the stand-by display automatically, Select [Yes]/[No] at [Imag e update/ decorated with a frame.
Page 115 Select an image from My picture of the From the Menu, select [Settings] [Call] Data Box at [Calling]. [Call display] and press  You can set the following files. File Category File size Image size format My picture GIF/ Max. 250K Max.
Page 116 Select [ON]/[OFF] at [Phonebook image]. Setting the Illumination of the [ON]: Display, Keypad, etc. Display the image set for the Des call display in <Backlight/Illumi.> the Phonebook when placing/receiving a voice/ videophone call. You can set the display light brightness, color [OFF]: of the keypad light, and whether to turn on the Display the image set in the Animation or...
Page 117 Select a color of keypad light at [Keypad Select [ON]/[OFF] of the illumination light]. indicator at [Set]. [Color1]: Select the illumination indicator at [Set all Turn on the white light. illumination]. [Color2]: Turn on the red light. Select from 24 types of the lighting patterns. W h e n y o u m o v e t h e c u r s o r t o a c o l o r, t h e [OFF]: illumination indicator lights.
Page 118 Select a display menu at [Start menu Saving Power for the setting]. Display <Power saver> [Standard menu]: Display the Standard menu. The display is automatically turned off to save [Kisekae menu]: Display the Kisekae menu. battery power when no operations are made [My Selection]: for a specific period.
Page 119 Select data from Kisekae Tool of the Data Using the Kisekae Tool Box at [Kisekae Tool]. <Kisekae setting> To check an image of the Kisekae tool Move the cursor to the image and press (Play). Using the Kisekae Tool allows you to change To set the Color theme setting Select a color theme at [Color theme setting].
Page 120 Resetting the Menu Display Customizing the Kisekae Menu You can reset the display of the Kisekae menu <Kisekae menu> to the default setting. Changing the Menu Items From the Menu, select [Settings] [Management] [Reset] [Reset menu You can change the items of the saved Kisekae screen] and press menu with other menu items.
Page 121: Setting The Font Size
The indicator color for a missed call follows that Resetting the Operation History set in the Incoming set. of the Kisekae Menu The indicator flashes in the following order of priority when there are mix of missed calls and Some Kisekae menus save the frequencies unread mail/messages.
Page 122 Select a font size to be set at once and Select a font size at [Phonebook]. press The Phonebook font size is set. The All font size setting is set. Even if you change the mail font size, the size of Pict-D.
Page 123: Security Settings
Security Settings About Security Codes Security Codes Used on the FOMA Terminal ............122 Changing the Security Code .............. <Change code> <UIM setting> Setting the PIN Code ................Canceling the PIN Lock .................... 124 Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ..................
Page 124: Security Code
Some functions provided for convenient use (DoCoMo e-site) and using the of the FOMA terminal require the security DoCoMo Network Services, can be set to any code to use them. Besides the Security code number at the time of subscription. It can be for operating the mobile phone, the network also changed later by yourself.
Page 125: Changing The Security Code
Enter a new Contact the nearest You need to enter the PIN1 code when the FOMA PIN1/PIN2 code DoCoMo shop terminal is powered on. [OFF]: Do not need to enter the PIN1 code when the FOMA terminal is powered on.
Page 126 Enter a PIN1 code and press (OK). Canceling the PIN Lock The entered PIN1 code is displayed as asterisks ( ).  The PIN1 code is set to “0000” at the time of Example: Canceling the PIN1 code lock subscription. Enter the 8-digit PUK code and press The PIN1 code setting is set.
Page 127 Functions Description Locking the Keypad to Prevent Personal data Disable some functions to prevent Unauthorized Use lock others from viewing/editing your <Lock all> personal information such as the Phonebook and Schedule data. You You can set the Lock all to prevent others can set the lock for each function or from using the FOMA terminal.
Page 128 My DoCoMo website. folder in My picture of the Data Box is used for You can also request DoCoMo by a call, etc. to the incoming image. In this case, not the caller’s name but the caller’s phone number is displayed.
Page 129 FOMA terminal is powered - ToruCa - GPS off. When using the DoCoMo Voice Mail Service - Call Cost/Duration or Call Forwarding Service, these services can - Receiving data using the iC communication...
Page 130 Display item Function to be locked Setting the Functions to Be Schedule Schedule and displaying events/ Locked contents of the Schedule alar m display You can set the Personal data lock to a function Alarm Alarm and displaying titles of the individually.
Page 131 Enter the Security code and press You can receive mail/Message R/F automatically even if the Personal data lock of the Mail/ (OK). Message is set. The Personal data lock of the Phonebook is You need to cancel the Personal data lock canceled temporarily and the Phonebook is temporarily to download i- ppli when the...
Page 132 Select [ON] and press Enter the Security code and press (OK). The Key dial lock is set and “ ” appears. To cancel the Key dial lock Select [OFF]. The Key dial lock is canceled and “ ” disappears. When the Key dial lock and Personal data lock are set simultaneously, “...
Page 133 Select a display method at [Call display]. Display the Secret Data [Name+Phone number]: Display the name and phone number of a person <Secret data display> who is saved as Secret. [Name]: You can set [Display]/[OFF] of the Secret data Display the name only of a person who is saved display (P.130) in the lists of the Phonebook or as Secret.
Page 134 Select a setting method and press Protecting Mail from The screen for selecting a folder to be set the Mail Unauthorized Access security appears. <Mail security> Select a folder to be locked and press You can set the FOMA terminal not to display “...
Page 135  SMS and i-mode mail can be received regardless of From the Data Box, select a category and this function. press  For an incoming PushTalk call, it is only to the The folder list appears. caller’s phone number that the Accept/Reject call setting is valid.
Page 136: Rejecting Calls With No Caller Id
Select [Phone No.] and press From the Menu, select [Settings] [Lock/ Security] [Denied no ID] and press The Security code screen appears. Enter the Security code and press (OK). Number field Select [ON]/[OFF] of the Denied no ID for To specify a group each non-display reason.
Page 137 The packet communication Rejecting Calls from Callers with charge of sending the mail is not required. If you have a PC (My DoCoMo), you can use it No Phonebook Entry <Reject unknown> more efficiently.
Page 138 FOMA terminal Data Security Service Center PC, etc. Function name/ Purpose Page Store/download the Service name Phonebook/images/mail R e g i s t e r o r c h e c k “i-mode See the information about your Disaster “Mobile Phone Easily restore data when the Internet or someone’s condition...
Page 139 Camera About the Copyright and Portrait rights Objects, such as movies, still images, and sounds, recorded using the FOMA terminal and productions on a site (program) or Internet site are prohibited by the copyright law from reproduction, transformation, and compilation without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Page 140: Before Using The Camera
Notes on Using the Camera Before Using the Camera  To prevent shaking, hold the FOMA terminal firmly You can record images using the built-in or place it on a stable place and use the Auto timer when recording. camera, and you can send them by attaching ...
Page 141 About Still Image/Movie About the Orientation of Still Images Being Saved Item Still image Movie Images recorded with the camera are saved in File JPEG (Exif format) MP4 (MobileMP4) landscape or portrait orientation depending on format the image size to be recorded. An image of a File When saved to [Data When saved to [Data...
Page 142 Number of Still Images You Can Save The number of still images that can be saved in the Data Box or microSD card varies depending on the image quality and size, recording conditions, and object of shooting. Estimated number of still images you can record and save in the Data Box Image size QCIF QVGA...
Page 143 Estimated recording time of movie you can record and save in the microSD card (64MB) (m: minute, s: second) Recording time available for each movie Total recording time available File size Shoot Image size Image quality Image quality restriction mode Super fine Fine Standard Economy Super fine...
Page 144: Recording Still Images
 Auto focus frame Icons in the Camera Mode  Saved with this side up indication (P.149, 157) In the Camera mode display, the following  Set attach loc. info ON (P.151) icons appear depending on the settings and  GPS positioning accuracy (P.248) functions selected.
Page 145 To add location information Point the camera at the object and press From the Function menu, select [ ] (Location (Shoot). info) ] (Rcv location info). To display the obtained detailed information, from the Function menu, select [ ] (Location info) (Location detail) (P.261).
Page 146 Press (Func) in the Camera mode When you record an image while the Auto orientation is set to [ON], the image may be display, select [ ] (Shoot mode) displayed in an orientation different from that ] (Deco-Snap), and press seen in the FOMA terminal in the following cases.
Page 147 Point the camera at the object and press Press (Func) in the Camera mode (Shoot). display, select [ ] (Shoot mode) ] (Panorama), and press The white focus frame is used to adjust the focus. When the image comes into focus, the confirmation The display for selecting the Panorama mode (size sound is heard, and the focus frame turns green.
Page 148 Press (Save). Point the camera at the object and press (Shoot). The composed panorama image is saved. The white focus frame is used to adjust the focus. After the shutter sound is heard, do not move When the image comes into focus, the confirmation the camera while the message “Photographing.
Page 149: Recording Movies
To record in the Media style Point the camera at the object and press Press the left key on to turn on/off the photo (Shoot). light and use to operate the zoom. The white focus frame is used to adjust the focus. Press (Stop) to end recording.
Page 150: Using The Basic Functions Of The Camera
Noise in the form of a mosaic may appear in an Direct Key Operation image or the image or sound may be interrupted while you are recording a movie. Note that this is Frequently used functions are assigned a not malfunction. Direct key.
Page 151 Selecting an Image Size Switching the Camera Used for Recording You can select the size of a still image and movie to be recorded from eight and four You can switch between the Out- and In- types, respectively. cameras for recording. ...
Page 152: Adjusting Zoom
Switching the Recording Scene Adjusting Zoom When you record an image with the Out- You can adjust the zoom of an image when camera, you can automatically adjust the you record using the Out-camera. The zoom camera settings in accordance with a scene. magnifications that can be adjusted for each When you change a scene, the White balance, image size are as follows.
Page 153: Adjusting Brightness
Adjusting Brightness Changing the Camera Settings The image brightness (EV: Exposure Value) can be adjusted according to the ambient condition. The exposure can be adjusted in Setting Whether to Add Location 13 levels from -2.0EV to +2.0EV for recording Information to an Image When Saving with the Out-camera and in seven levels from -1.0EV to +1.0EV for recording with the In- You can add location information automatically...
Page 154 Select [Shoot] [Set attach loc. info] and When the Auto attach loc. info is set to [ON], it may take time to start next recording. press When the Auto attach loc. info is set to [ON] and the Attach loc. info meth. is set to [From act. camera], the icons which show the accuracy appear in the Camera mode display (P.142).
Page 155 Turning on the Photo Light Switching the Direction for Recording Movies The FOMA terminal’s built-in photo light can be used when recording with the Out-camera in a You can switch the direction for recording dark place, etc. movies of [QVGA(320 240)] size. ...
Page 156: Adjusting The Camera During Recording
Setting Movies to Enable Adjusting the Camera Playback on Other FOMA Terminal during Recording You can change a set of settings necessary for Adjusting White Balance a recorded movie to be played back on other FOMA terminal with a single operation. The color balance of the image can be ...
Page 157 Select [Adjust] [Picture effect] and Setting a Position for Automatic press Adjustment of the Exposure The menu for selecting a picture effect appears. [OFF]: You can set what position on the screen to use Cancel the picture effect. as a reference for the image brightness (EV) [Negative art]: adjustment.
Page 158: Setting The Camera Operation
Press (Func) in the Camera mode Setting the Camera display, select [ ], and press Operation Select [Set] [Auto save] and press The menu for selecting whether to automatically Selecting Where to Save Images save the recorded images appears. [ON]: You can set the place to save recorded After recording, the image is automatically images.
Page 159 Select [Replicate to main]/[Not replicate] Displaying an Image to Align to the Orientation and press of the FOMA Terminal When Recorded The Mini-Photo creator is set. When it is set to [Replicate to main], “ ” appears. You can set a recorded image to be rotated to align to the orientation of the FOMA terminal by Selecting the Image Quality obtaining the orientation information of it and...
Page 160 Changing the Shutter Sound Restricting the Size of a File Used for Movie Recording The shutter sound can be selected from three types when the Shoot mode for still images is You can restrict the size of a movie file to a file [Regular], [Panorama], or [Shoot with frame].
Page 161: Using The Bar Code Reader
Record a movie with sound track only. No video directions. This data includes is recorded. alphanumeric characters, character strings (kanji, kana, “Example: FOMA SO906i” Select a shoot mode and press pictographs), melodies, still The Shoot mode is set and the icon for the current images, and ToruCa cards.
Page 162 Locate the JAN/QR code at the center of Displaying the Saved Data the display and press (Scan). You can save up to 10 data entries for JAN or QR codes that are scanned.  When a total of 10 data entries is saved and a new JAN/QR code is scanned, unprotected data is overwritten from the oldest.
Page 163 i-mode/i-motion/ i-Channel i-mode is a paid service that requires a subscription. What is i-mode? ....................... 162 Displaying the i-mode Menu .............. <i-mode menu> Displaying a Site Displaying Sites ....................... 163 Using Sites ......................164 Saving a Site in My Menu ................ <My Menu>...
Page 164 Displaying the i-mode What is i-mode? Menu <i-mode menu> i - m o d e a l l o w s y o u t o u s e t h e i - m o d e compatible FOMA terminal (hereinafter referred Press (i-mode) in the stand-by display.
Page 165: Displaying Sites
Reconnecting to the Web Page Displaying Sites Displayed Last Various sites offered by IP (information service The site displayed when you last connected to providers) can be displayed (the subscription i-mode is recorded as the Last accessed URL. is necessary for some sites). You can directly connect to this site from the From the i-mode menu, select [i Menu] Last accessed URL.
Page 166: Using Sites
Displaying the Previous/Next Page Using Sites The FOMA terminal stores up to 20 most Selecting Links or Other Items recently displayed site pages in its cache. of Choice The stored site pages are deleted when i-mode is terminated. When using a site, you may display a linked When the left or right arrow is displayed in the site, enter texts (textbox) or select an item from guide display, the pages stored in the cache...
Page 167 The page may not be displayed correctly even Displaying a Site URL if the character code is changed. Note that changing the character code when the page is The URL of the currently displayed site can be displayed correctly may cause the page to be displayed.
Page 168 (such as driver’s license), - Date/time information - Sound effect setting the FOMA terminal, and UIM with you to the nearest - Language setting - Terminal type DoCoMo shop. - Model information From the i-mode menu, select [i Menu] [English] [Options] [Change i-mode...
Page 169 Displaying Internet Sites Saving a Site to Display It Quickly <Internet connection> <Bookmark> i-mode compatible Inter net site can be Up to 200 URLs of the sites you display displayed from the i-mode terminal. frequently can be saved in the Bookmark. The sites can be directly accessed from the ...
Page 170 Displaying a Site Adding/Deleting Folders A site can be displayed using a bookmark. Folders in which bookmarks are saved can be added or deleted. Up to 10 folders can be From the i-mode menu, select [Bookmark] used to manage bookmarks and folder names and press can also be changed.
Page 171: Deleting A Bookmark
Select a bookmark and press (Func). Saving a Site in the Screen The Function menu appears. Memo <Screen Memo> Select [Move] [Move one] [Yes] and press You can save sites as your favorite ones in the The Select move to display appears. Screen Memo.
Page 172 Select a screen memo and press Select a screen memo and press (Func). The screen memo is displayed. To check the URL The Function menu appears. Move the cursor to the screen memo and from Select [Delete] [Delete one] [Yes] the Function menu, select [URL].
Page 173: Downloading Data From Sites
Example: Downloading a melody from a related site Select a place to save to and press While displaying a site, select a melody The graphic is saved in the selected place to save and press When there is not enough memory or the maximum number of graphics has been reached The screen informing insufficient memory or that the maximum number has been reached...
Page 174 To download mail Select a file from My picture/i-motion of While displaying the site, select mail and select the Data Box or microSD card. [Save] /[Save in mail box].  The following files can be uploaded.  When you select [Save in mail box], the mail is saved in the Mail box.
Page 175 Select [Yes] and press Composing/Sending Mail from The software is started to run. the Current Display You can compose/send mail to a mail address Activating 1Seg from the currently displayed in the display (Mail To). Current Display  When 2in1 is set to the B mode, you cannot use the Mail To function.
Page 176 The entered host is saved. You do not need to change the Host setting Select the host and press when using the i-mode service of DoCoMo. The host is changed. You can set up to 10 hosts for receiving services other than the services provided by Note that packet communication is not covered i-mode (DoCoMo).
Page 177 An authentication company issues these certificates. They are saved in the FOMA terminal at the time of purchase. [DoCoMo cert.]: This certificate is required for connecting to the FirstPass Center and FirstPass-compatible sites and is saved on the UIM (green/white).
Page 178 DoCoMo shall have no liability for any content a n d i n f o r m a t i o n p ro v i d e d b y F i r s t P a s s - compatible sites.
Page 179 Changing the Host for What is i-motion? Certificate Issue <Select host> i-motion is movie data that contains both video and sound tracks. You can play back an Normally, you do not need to change the i-motion on the FOMA terminal and set a saved setting.
Page 180 Some i-motion may not be played back/saved Downloading an i-motion p ro p e r l y e v e n i f i t s d a t a i s d o w n l o a d e d successfully.
Page 181 Select a channel and press service, the subscription to i-mode is required.) There are two types of channels: “Basic channel” provided by DoCoMo and “Favorite channel” provided by IP (information service providers). “Basic channel” is free of the packet communication charge for automatic updates of information.
Page 182 Changing the i-Channel When You Receive i-Channel Settings Setting the Telop Text You can set the display speed of the Telop text and also turn off the Telop text. From the i-mode menu, select [i-Channel] [Ticker] and press The Ticker display appears. Telop When you receive infor mation, the received Set the speed for displaying the Telop text...
Page 183 Mail What is i-mode Mail? ....................182 Displaying the Mail Menu ............... <Mail menu> Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail ......... <Compose and send mail> Composing and Sending Deco-mail ............<Deco-mail> <Decome-Anime> Composing and Sending Decome-Anime ........<Template> Using a Template to Compose Deco-mail/Decome-Anime .......
Page 184: Displaying The Mail Menu
 Receiving SMS (P.215) (P.198).  Checking new SMS (P.216) Compose Compose and send new i-mode mail  See DoCoMo’s website to send/receive SMS to/from message (P.183). an overseas telecommunication company other than Create Compose and send new Decome- DoCoMo.
Page 185 Press (Send). Composing and Sending The mail is sent. i-mode Mail <Compose and send mail> When failed to send mail because of being outside of the i-mode service area The screen for confirming the Auto-send appears. Mail sent completely is saved in [Outbox]. If you want to send the mail automatically when ...
Page 186 Adding an Address Entering an Address from the Mail List You can send i-mode mail containing the same information up to five addresses all at once by You can send mail to several recipients saved adding these addresses. You can select the in the mail list.
Page 187: Composing And Sending Deco-Mail
Enter an address and subject. While using the mail function, the Auto-send does not operate.  Follow the same steps as in “Compose and send When you edit the mail which is set the Auto- mail” (P.183, step 2 to 4). send, the Auto-send is canceled.
Page 188 Press (Close) and then press Decoration Icon Description menu (Send). U s e t o s e l e c t To save the composed Deco-mail as a template [3]: whether or not to allow From the Function menu, select [Save template] Blink/Move/ the text to blink (ON/OFF) [Yes].
Page 189 Select the text blink/move/alignment and Select a pattern image/color scheme and press press to select whether or not to allow the text to select a pattern image to be inserted to blink (ON/OFF) and to select the alignment above and below the text and to select a (left justified/centered/right justified) or move (none/ pattern image/color scheme.
Page 190: Composing And Sending
When you select “ ” Saving Item as Colored Item Insert a line at the line where the cursor is displayed. You can save colored items on the target When you select “ ” words of the prediction conversion. You can to select save one colored item per one target word.
Page 191  You can only insert an image or enter a text in the Enter a main body in the [Char. 1]. portion specified by a template beforehand.  You can enter a main body within 5,000 full-  The number of the entered bytes displayed in the width or 10,000 half-width characters, however, Edit Decome-Anime display is only just an estimated the actual number of characters you can enter is...
Page 192: File Attachment
To use Decome-Anime template When you send Decome-Anime to the i-mode Select [Decome-Anime Template]. terminals other than Decome-Anime compatible terminals, it is received as ordinary mail in which To check a template a URL for viewing Decome-Anime is included. Select a template. However, some terminals may receive mail only To change the title of the main body in which no URL for viewing...
Page 193 Files that can be attached [ToruCa]: Select data from ToruCa of the Main memory/ Type Restrictions, etc. microSD.  A JPEG image exceeding Image (GIF/ [PDF]: JPEG/SWF) 2M bytes is automatically Select PDF data from My document of the Main converted to a file of 2M bytes memory/microSD.
Page 194: Saving I-Mode Mail To Send Later
It may take time to send mail depending on the Saving i-mode Mail to size of a file attachment. Send Later When you send mail with a still image attached, <Save mail> t h e s e n t i m a g e m a y b e d i s p l a y e d i n a n orientation different from that seen in the FOMA If you do not want to send composed mail terminal.
Page 195: Selecting To Receive I-Mode Mail
You can automatically receive up to 100K Selecting to Receive bytes of data in each mail, including the file attachment. You have to manually obtain a file i-mode Mail <Receive option> attachment exceeding 100K bytes from the i-mode center (P.197). You can check through mail held at the i-mode If new mail is received when the number of saved center, where you can select mail to receive...
Page 196 Select [ ] (Holding) for the mail and Replying to i-mode Mail press <Reply to mail> ] (Receive): Receive a selected i-mode mail. You can compose and send replies to the ] (Delete): Delete a selected i-mode mail. received mail. ] (Holding): ...
Page 197: Forwarding I-Mode Mail
Select [Save address] and press Forwarding i-mode Mail The screen for selecting how to save to the Phonebook appears. <Forward mail> Select [New] and press You can forward received mail to another The screen for selecting where to save appears. person.
Page 198: Saving Schedules From I-Mode Mail
Select [New] and press Playing Back/Saving a File The screen for selecting where to save appears. Attachment Received in i-mode Mail When you select [Add] Select an entry to which you want to add the phone number from the Phonebook. You can display/play back/save/delete a file that is attached or pasted in i-mode mail or a Select [Main memory] and press...
Page 199 Example: Saving a file attachment received in mail Receiving a File Attachment Selectively From the received mail list, select mail You can obtain a file attachment exceeding and press 100K bytes and one for which the Attached file Select a file attachment and press pref.
Page 200 To display the SMS list in the UIM Displaying Received/Sent/ Press (UIM).  When 2in1 is set to the B mode, the SMS list Saved Mail cannot be displayed. To display the folder hidden by the Mail security You can display received/sent/saved mail temporarily any time you want to.
Page 201 You can change the display style of the mail list To switch the display of the mail list based on the (P.206). date (Day Jump) Press (Day Jump). The cursor is moved to the  The received/sent/saved date/time field indicates Date index bar and you can use to switch the time when the mail is received/sent/saved...
Page 202 For Decome-Anime Select mail and press The main body of Decome-Anime is displayed Received mail and the Flash movie is played back. The Address type playback may be repeated. Press (Stop) to Received date/time stop the playback. When you press (Play) Sender while the playback is stopped, the Flash movie...
Page 203  You cannot delete the preset folders, folders Storing the Mail at the Data including protected mail, mail folders supported Security Service Center by i- ppli with mail software, and [MessageR]/ [MessageF]. Folders of i- ppli with mail can be deleted if there is no supporting software for that You can use the Data Security Service to store i- ppli with mail.
Page 204: Deleting Mail
Example: Protecting received mail Moving Mail to a Different Folder From the received mail list, select mail and press (Func). You can move received/sent mail to another folder using three methods. The Function menu appears.  You cannot move messages in the [MessageR]/ To cancel the protection Move the cursor to the protected mail and press [MessageF] folder to another folder or mail from...
Page 205 Example: Deleting received mail Select [Mail search] and press From the Mail menu, select [Inbox] and press To delete all received mail From the Function menu, select [Delete] [Delete all], enter the Security code, and select [Yes]. To delete all read mail From the Function menu, select [Delete] [Delete read msg], enter the Security code, and select [Yes].
Page 206 Example: Displaying received i- ppli mail Sorting Mail From the Mail menu, select [Inbox] and press Received or sent mail in a folder can be sorted for display temporarily. Select the folder of i- ppli with mail and Example: Sorting received mail press (Func).
Page 207: Using The Mail Ranking
To compose mail Classifying Mail by Mail Mark Move the cursor to the ranking and press (Mail). When you add a mark on the received/sent To save data in the Phonebook mail, you can display mail by selecting a mark Move the cursor to the ranking and press by the Mail search (P.203).
Page 208 Setting How to Display a List of Assigning Separate Folders for Mails Mail You can select the display style of Inbox, You can save requirements to sort received Outbox, and Draft lists using the following four or sent mail so that they can be automatically methods.
Page 209 @ mark is required. However, when mail. you set the mail address to “phone number@ docomo.ne.jp”, enter the phone number only. Saving a Signature [Group]: Specify a group.
Page 210 Setting a Mail List Setting the Type of Mail/Message to be Checked By saving mail addresses in a mail list, you can send mail to all members in the list at the same You can set whether to receive mail, Message time.
Page 211 [Prefer alarm]: Press (Complete). Display the incoming mail or received mail The mail list is set. display. To delete a mail list [Prefer operat.]: Move the cursor to a mail list in the Mail list Do not display the incoming mail or received mail display and from the Function menu, select display.
Page 212: Receiving A Message
Message R/F that has been sent to you in the Receiving a Message following situations is held at the i-mode center. - During a videophone call <Receive message> - When the FOMA terminal is powered off - When the FOMA terminal is outside of the When a message is received while in the i-mode service area stand-by display, the contents of the message...
Page 213: Checking A New Message
Select a message and press Checking a New Message Received date/time <Check new message> Subject New messages held at the i-mode center while the FOMA terminal is powered off or outside of the i-mode service area can be checked.  Depending on the radio wave condition, you may not be able to check new messages.
Page 214: Deleting A Message
Protecting a Message Deleting a Message Message R or Message F can be protected You can delete messages using four methods. from being overwritten. Example: Deleting Message R  An unread message cannot be protected. From the Mail menu, select [Inbox] Example: Protecting Message R [MessageR] folder and press From the Mail menu, select [Inbox]...
Page 215: Setting Early Warning "Areamail
You cannot adjust the volume of the beep when What is Early Warning you receive Area Mail of the urgent earthquake news flash. The pattern set at the beep is always “AreaMail”? used for the vibrator (P.103). The vibration pattern cannot be changed but the Beep time Area Mail is a service that allows you to receive can be set (P.214).
Page 216: Composing And Sending Sms
FOMA terminals. (OK).  You can exchange SMS with recipients/senders who subscribe to an overseas telecommunication company other than DoCoMo. See the NTT DoCoMo website for infor mation about countries and overseas telecommunication companies you can use for sending/receiving SMS.
Page 217: Receiving Sms
Enter a phone number within 21 digits. When a recipient subscribes to an overseas The FOMA terminal automatically receives telecommunication company other than DoCoMo SMS. You can save up to 3,000 received SMS Enter “+” (press for over a second), “Country including i-mode mail in [Inbox].
Page 218: Setting Sms
SMS center when a recipient is unable to receive the SMS you sent. [SMSC]: Set when you receive SMS services provided by companies other than DoCoMo. [Type of Number]: When you select [Others] at [SMSC], select [International]/[Unknown].  When “ ” or “#” is included in the address entered at [Address], select [Unknown].
Page 219 i- ppli What is i- ppli? ...................... 218 Downloading i- ppli from a Site ................218 Starting i- ppli ................... <Start i- ppli> Starting i- ppli Automatically ..............<Auto-start> <i- ppli stand-by> Setting i- ppli for the Stand-by Display ........Managing i- ppli .....................
Page 220: What Is I- Ppli
Select [Yes] and press What is i- ppli? The downloaded software is started. Depending on software, after downloading is By downloading i- ppli from sites, the FOMA completed, the screen for setting the software (NW terminal can be made much more useful in setting, Stand-by display, Location information, and many ways.
Page 221: Starting I- Ppli
If you have deleted preinstalled software, you Checking i- ppli Information can download it from “PlayNow by SO”. When Downloading [i Menu] ] (Menu List) ] (Mobile Phone Manufacturers) The software information can be displayed [PlayNow by SO] (Japanese only) when i- ppli software is downloaded from a The message “Terminal and UIM ID will be sent”...
Page 222  Software icon Select a folder and press  An icon assigned to each software appears. Icon(S) Icon(L) If there is no icon assigned to software, the following icons appear.   : i- ppli software   : i- ppli DX software ...
Page 223 Images used by i- ppli software and some of Warning the data you entered may be automatically sent This Motion tracking compatible-appli is the game to a server via the Internet. played by tilting or shaking the FOMA terminal. It Images used by i- ppli software include may injure or damage by hitting a person or object...
Page 224 Select [Individual set] and press When you set [Yes] for the Use icons, icon information might be accessed by a third party since it is sent to IP (information service providers) via the Internet just as it is the case with the “serial number of your mobile phone/UIM (FOMA card)”.
Page 225 for SO (Avatarmaker for for SO (J-E Shabette Honyaku(Speech Translation)) for SO (J-C Shabette Honyaku(Speech Translation)) It is an appli which allows you to create your original © ATR-Trek Co., Ltd. avatar image easily by combining the facial and body It is the software to translate sentences spoken into the parts such as gender, body type, face line, hair, eye, microphone from Japanese to English or vice verse for...
Page 226 ™ (deco-e maker) AmbientTimeWhite It is the software to display the clock with the ball circling around it in the stand-by display. Select [ ] (Setting) to change the color of the clock/ ball or background, switch the clock format in 12/24 You can create materials for decorating mail by hours, or set to turn on/off the world clock or date.
Page 227 It is a map appli which allows you to zoom in/out or ( G - G U I D E T V scroll the map. You can search information of shops, Program List Remote Control) etc. by entering keywords. You can also view satellite images of cityscape, etc.
Page 228 About timer recording function (i-appli Banking) You can set a timer for recording a 1Seg program by selecting a program you want to record from the program list provided by this appli. The display shown is an  Booking timer recordings image for explanatory Start this appli, select a program you want to record, p u r p o s e a n d m a y b e...
Page 229 “DCMX” is an “iD” compatible credit service provided “iD” to a reader. It provides you with a convenient way by NTT DoCoMo group. Two types of services are of shopping because you do not need to give your available in DCMX: DCMX mini in which the total signature as you did before.
Page 230: Starting I- Ppli Automatically
Select [Yes]/[No] and press i- ppli software Whether to enable the Auto-start is set. Under no condition will DoCoMo be held liable for any information set in the IC card. Setting the Start Date and Time (Appli for selling items at...
Page 231: Setting I- Ppli For The Stand-By Display
Select [User set] and press Setting i- ppli for the Stand-by Display <i- ppli stand-by> Only one supporting software can be set for the i- ppli stand-by display. The software that supports the i- ppli stand-by display is Select a style of the Auto-start time at identified by “...
Page 232: Managing I- Ppli
Terminating the i- ppli Stand-by Upgrading i- ppli Display The software saved in the FOMA terminal can be upgraded if a newer version of the The i- ppli stand-by display is terminated and downloaded software is available on a site. the normal stand-by display is set.
Page 233 Deleting i- ppli Moving i- ppli to a Different Folder You can delete software using four methods. You can move software to a different folder Example: Deleting a software using three methods. Press (i-mode) for over a second in the stand-by display.
Page 234: Displaying I- Ppli Data In Microsd Card
Select [Stand-by err hist] and press Setting How to Display a List of Software You can select the display style of the i- ppli software list or IC card list using the three methods: [Icon(L)], [Icon(S)], and [List only]. To display the security error history The set display style is applied to all folders.
Page 235: Using Various I- Ppli Functions
Using Infrared Communication Using Various i- ppli Functions You can use the infrared communication (P.345) from the software running on the FOMA terminal. Using the Camera Function  There are some data that cannot be exchanged even if the other device is equipped with the infrared You can use the camera function (P.142) from communication function.
Page 237 Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ..................... 236 What is the iC transfer service? ................236 Starting an Osaifu-Keitai-compatible i- ppli ............237 Checking the IC Card Owner’s Information ........<Check IC owner> What is ToruCa? ...................... 238 Obtaining a ToruCa Card ............<Obtain a ToruCa card>...
Page 238 You may not be able to use the iC transfer services for important data. service, therefore make necessary steps such as DoCoMo shall not be liable for any data loss/ utilizing the backup service of each Osaifu-Keitai- change of the information saved on the IC card compatible service.
Page 239 Using the Osaifu-Keitai Starting an Osaifu-Keitai- compatible i- ppli When you hold up and show the FeliCa mark “ ” side of the FOMA terminal to a reading You have access to useful functions, for device, you can use the FOMA terminal for example, reading/writing data on the IC card payment as e-money or use it in place of a using an Osaifu-Keitai-compatible i- ppli in...
Page 240 Checking the IC Card Owner’s What is ToruCa? Information <Check IC owner> ToruCa is an e-card that can be obtained using Osaifu-Keitai. This convenient e-card can be You can check whether the UIM currently used for applications such as flier, restaurant inserted in this FOMA terminal is addressed as card, or coupon.
Page 241 Some ToruCa cards may not allow you to send Methods for Obtaining a ToruCa Card mail with ToruCa cards attached, send data using iC or infrared communication, or copy Reading device them to the microSD card. Site Displaying a ToruCa Card microSD card <Display ToruCa>...
Page 242 Select a ToruCa card and press Managing ToruCa Cards Index  You cannot move, sort, or search a ToruCa card in Category icon the [Used] folder. Adding/Deleting Folders You can create and delete a folder for saving a ToruCa card. You can create up to 20 folders Select [ ] (Detail) [Yes] and press...
Page 243 Select a ToruCa card and press (Func). Moving a ToruCa Card to The Function menu appears. Another Folder Select [Delete] [Delete one] [Yes] You can move ToruCa cards to another folder and press using three methods. The selected ToruCa card is deleted. ...
Page 244 Select [Search] and press Setting Whether to Obtain a ToruCa Card from Data Broadcasting/Data Broadcasting Sites You can set whether to obtain ToruCa cards from a data broadcasting/data broadcasting site automatically. From the Menu, select [Osaifu-Keitai] [Settings] [ToruCa setting] [Auto rcv. 1Seg ToruCa] and press To display the category icon list [Yes]:...
Page 245 To delete a sorting requirement Setting Whether to Automatically Move the cursor to the sorting requirement Recognize a ToruCa(Detail) Card and from the Function menu, select [Delete] [Delete one] [Yes]. To delete several sorting requirements, from the Function menu, select You can set whether to let a reading device [Delete] [Select&delete], select sorting...
Page 246 Setting Whether to Check the Setting Whether to Notify That within Duplication of a ToruCa(Detail) Card the Communication Range <IC act. notice> You can set the FOMA terminal to check You can set the FOMA terminal whether to notify if the ToruCa(detail) card you are trying to you of being within the FeliCa communication obtain has been obtained already when you range or the FeliCa communication being...
Page 247 Select [ON]/[OFF] at [IC card lock]. Locking the IC Card Select [Last status]/[Locked] at [IC Function <IC card lock> lock(power-off)]. [Last status]: You can lock the IC card function to prevent Keep the current status even after the FOMA others from using it. terminal is powered off.
Page 249 GPS Function Precautions on the Use of GPS Functions .............. 248 <Position location> Checking Your Location ..............Using the GPS-compatible i- ppli .............. <i-appli> Providing Your Current Location Information upon Request ..<Location provision> <Location notice> Notifying Your Current Location Information ........Displaying the History of Location Positioning .......
Page 250 Press (Use).  Please note that DoCoMo shall have no liabilities for any purely economic loss including those due to missing a chance to check the measurement (communication) results because of external factors To retry the operation...
Page 251  The location information URL being sent is B mode. only displayed on the i-mode compatible  Please note that DoCoMo will not guarantee any terminals. result such as of the accuracy and immediacy of To save the location information in the Phonebook information such as map or route.
Page 252 After 90 After 90 Menu Contents Menu Contents days days  Use the GPS function to view  Search facilities which are helpful Free Paid (Map) the current location or the map when it is an emergency.  i- ppli for emergency use which searched by entering a word, (Emergency address, or phone number.
Page 253 Key operation Action Display and Operations of a Map Display the points where you  The display shown is an image for explanatory (3D Panorama) can display a 3D intersection or purpose and may be different from the actual panorama image. Select the point display.
Page 254 Select [ ] (Condition), press Navigating the Searched Route with select an item below, select [ Sound and Display to the Destination (Set as above), and press You can set the departure point and the Select from [ ] (Fast), [ destination to search the route.
Page 255 Key operation Action Display and Operations of Navigation (car) Delete the displayed route.  The display shown is an image for explanatory (Delete route) purpose and may be different from the actual Switch to the intersection mode. display. (Switch mode) Navigation (car) display Using Voice Input At the voice input menu, you can search...
Page 256 There may be a charge for the use of the service. Using the Setting/Help  To use the Location provision, follow the information provided by the service provider and DoCoMo’s From the Top menu, select [ website. ], press , and select items from the ...
Page 257 When the settings for using each service is set to “ When 2in1 is used, the location information is ” (Check every time) provided, regardless of the 2in1 mode. Some Service client IDs may not be displayed. Setting Whether to Provide Your Location Information You can set whether to accept or reject the request to provide your current location...
Page 258 Starting time: 09:00 Ending time: 22:00 Operations When the Period to Permit for Settings Providing Location Information is Set Period for providing location Repeat information Valid period Example: When the current date and time is “2008/4/23 type 14:00” None From 2008/4/23 14:00 to Starting time: 15:00 Ending time: 22:00 specified...
Page 259 Starting time: 15:00 Ending time: 10:00 Starting time: 09:00 Ending time: 09:00 Settings Settings Period for providing location Period for providing location Repeat Repeat information information Valid period Valid period type type None From 2008/4/23 15:00 to None From 2008/4/23 14:00 to specified 2008/4/24 10:00 specified...
Page 260 Enter a host address within 100 half-width  To use the Location notice, follow the instructions alphanumeric characters and symbols. provided by the service provider or on the DoCoMo’s website. There is a charge for the use of Enter each item. the Location notice function. Press (Complete).
Page 261 To delete a party Select [Loc. service client] a party to Move the cursor to the party and from the be notified and press Function menu, select [Delete] [Delete one] “ ” flashes and the incoming [Yes]. To delete all parties, from the Function indicator flashes.
Page 262 To use the location information Select [Phone number] [Direct input], Press (Use). press , and enter a phone number.  For details about how to use the location Enter the phone number within 26 half-width information, see P.261. numeric characters including “ ”, “#”, “+”, or “P”. To delete a location history record ...
Page 263 (OK). details about “ ”, see the The screen for confirming whether to paste the DoCoMo’s website. location URL appears. To add the location information on an image To add the location information by selecting from the Select [Attach to image]...
Page 264 Setting the Positioning Setting the GPS Functions Accuracy <GPS settings> You can set to prioritize either the speed or Setting the GPS Keys accuracy of positioning. From the Menu, select [LifeKit] [GPS] You can set the actions when performing the [GPS settings] [Positioning mode] Position location by pressing...
Page 265 1Seg About 1Seg ......................264 Before Using 1Seg ....................265 Setting Channels ................<Set channel list> <Activate 1Seg> Watching 1Seg ................. Using the Program Guide i- ppli ............ <Program guide> <Booking list> Setting a Timer for Watching/Recording a 1Seg Program ....Using Data Broadcasting ..................
Page 266: About 1Seg
About Radio Wave About 1Seg 1Seg is one of the broadcasting services and What is 1Seg? uses the different radio wave (airwave) from the FOMA service. Therefore, regardless of 1Seg is a digital terrestrial broadcasting whether you are outside/inside of the FOMA f o r m o b i l e d e v i c e s a n d p ro v i d e s d a t a service area, you cannot receive 1Seg broadcasting as well as video and sound...
Page 267: Before Using 1Seg
The saved information may be displayed, or be Before Using 1Seg sent to TV broadcasters (broadcast stations) without another input of information when you Step to Watch 1Seg browse to the data broadcasting site. To delete information in the broadcast storage Example: When you watch 1Seg for the first time area, see P.285.
Page 268 FOMA terminal, under no condition will while watching or recording a 1Seg program, 1Seg DoCoMo be held liable for any damaged or lost is terminated. When you are recording a 1Seg data saved in the FOMA terminal. Furthermore,...
Page 269: Setting Channels
Select [Auto channel set] [Yes] and Setting Channels <Set channel list> press To watch 1Seg, you need to perform the channel setting and save the channel list beforehand. When you watch 1Seg, select a channel list suitable for the current location. You can save up to 10 channel lists, 62 broadcast stations for each list.
Page 270 Saving a Broadcast Station into Selecting a Channel List to be the Channel List Manually Used You can save broadcast stations to a channel You can select a channel list suitable for your list by selecting a service area, prefecture, and current location.
Page 271  Data broadcasting/displaying mail Select [Edit RC number] and press  The display varies depending on the Mail disp set (P.286). It is not displayed in the Media style.  Name of the channel  Name of the program/Rec timer display To delete a broadcast station ...
Page 272 Operating method Data broadcasting mode Video mode  The following operations cannot be performed in the data broadcasting mode. Key operation/ Operation - UP DOWN channel select Operation by Motion sensor - One-touch channel select UP/DOWN channel ) or - Channel search Time shift select single-tap and tilt the FOMA...
Page 273 Depending on the receiving condition of Watching 1Seg in the Media Style airwave, sound interruption or video pause may occur, black-shaped noise may appear When you switch the FOMA terminal to the on the picture, or a dark display without video, Media style while watching in the Normal data broadcasting, or program information may style, you can watch 1Seg in the horizontal...
Page 274 To check a recommended program Press to select a program and press Select [Recommend prog.] [Recommend list]. Move the cursor to a recommended program The program is displayed. and press (Detail) to display the detailed  In the Normal style, you can select a program information of the program.
Page 275 Press to select [Caption disp set] Adjusting the Image Quality and press You can set the image quality of the video The Caption disp set menu appears. portion. [Lang.1]:  You can set it either in the Normal style or in the The subtitle of Language 1 is displayed.
Page 276 Press to select [Auto Disp light] and Select [Display/Voice] [Switch sound] press and press The Auto Disp light display appears. The screen for selecting the Switch sound appears. [ON]: [Primary sound]: Adjust the light automatically. The primary sound is played back. [OFF]: [Secondary sound]: Do not adjust the light automatically.
Page 277: Using The Program Guide I- Ppli
From the Menu, select [1Seg/AV] [1Seg] Using the Sleep Timer [Program guide] and press You can set to terminate 1Seg automatically after the certain period of time.  You can set it either in the Normal style or in the Media style.
Page 278  When the copy control signal changes to “the Save each item. program cannot be recorded (Copy Never)” while : Allowed to be saved : Not allowed to be saved recording a program, the recording stops. Video data recorded up to that point is saved. Booking Timer Icon...
Page 279 Press (Complete). Booking Timer Icon Setting data program recording A timer for watching/recording a program is saved. Cfm. activation  To play back a recorded video, see “Displaying/ Select whether to display the Playing Back 1Seg” (P.322). Cfm. activation display when To set a timer for recording a program the Booking alarm is activated.
Page 280 If the alarm time comes in the following cases, At the Booking Alarm Time the alarm may operate when the status changes The alarm tone sounds for about 30 seconds to during a call or stand-by. - While placing/receiving a voice/videophone with the indicator flashing.
Page 281 Setting the Operation for the Booking Alarm You can set the detailed operation for the Booking alarm. Press (Func) in the Res. data list display. The Function menu appears. Select [Booking ALM set] and press When the timer recording starting time comes while watching 1Seg The Prep.
Page 282 Select an image from My picture/i-motion Select an indicator color at [Color]. of the Data Box at [Alarm image]. Select from 12 indicator colors or [C13:ALL] (indicator flashes in 12 colors in sequence).  You can set the following files. When you move the cursor, the indicator flashes File accordingly.
Page 283: Using Data Broadcasting
Select an item and press Using Data Broadcasting When you access an i-mode site from the data 1Seg allows you to use the data broadcasting broadcasting, the site is displayed in full-screen i n a d d i t i o n t o t h e v i d e o a n d s o u n d and the video and sound of 1Seg are not output.
Page 284: Using Tvlink
Using TVlink Recording 1Seg While <TVlink> Watching <Record 1Seg> Depending on the data broadcasting or data broadcasting sites, you can save a URL or You can save a program as a video and a memo information as a TV link. Once the scene of a program as a still image while frequently used site or memo information is watching 1Seg.
Page 285: Starting Time Shift Play While Watching
P r e s s fo r ov e r a s e c o n d w h i l e Recording a Still Image watching 1Seg. You can save up to 100 recorded still images. The display is switched to the Prep. to Rec display. After time for preparation, recording starts and Press while watching 1Seg.
Page 286: Receiving Mail While Watching 1Seg
Press to select [Time shift] and Receiving Mail While press Watching 1Seg Press to select [Start] and press While watching 1Seg, you can read received mail or reply to the mail. The display style of Press to select [Yes] and press the received mail varies depending on the Mail The Time shift recording is started and the Rec disp set.
Page 287: Various Settings For 1Seg
When the Mail disp set is set to [Display Various Settings for 1Seg telop] When you receive mail, the Telop text is displayed. <1Seg setting> When you receive i-mode mail from the sender who is saved in the Phonebook, the name of the sender and You can set functions regarding 1Seg, reset subject are added to the Telop text.
Page 288 Setting Not to Display Images of Setting a Place to Save a Data Broadcasting Site Recorded Video to <Display img> <Output of Rec> You can set whether to display images You can set a place to save a recorded video. provided by data broadcasting sites.
Page 289 Obtaining a ToruCa Card from Data Broadcasting Displaying a User’s Confirmation Screen for Sites Automatically Data Broadcasting Site <Auto rcv. 1Seg ToruCa> <Reset permission set> You can set whether to obtain a ToruCa card If you select [Yes,from then on] on the screen from data broadcasting/data broadcasting for confirming whether to connect to i-mode, sites automatically.
Page 290 From the Menu, select [1Seg/AV] [1Seg] Resetting the 1Seg Settings to [1Seg setting] [Reset 1Seg set] and the Default Settings <Reset 1Seg set> press The Security code screen appears. You can reset the settings of the functions regarding the 1Seg video and sound to the Enter the Security code and press default settings.
Page 291 Full Browser/PC Movie Displaying a Website Designed for PC ..............290 Key Operations While Viewing a Website ..............290 <Bookmark> Managing a Bookmark................Uploading an Image or Movie ..............<Upload> Setting Full Browser ..............<Full Browser setting> What is PC Movie? ....................301 Downloading a PC Movie ................
Page 292 Press (Edit) and enter the URL. Displaying a Website Enter the URL including “http://” within 512 half- Designed for PC width alphanumeric characters and symbols. Press (Cnct). You can view websites designed for PC on the FOMA terminal using Full Browser. ...
Page 293 To change the function assigned to a key Operating in the Normal Style To change the functions operated by pressing the keypad in the Normal style, from the Function menu, select [Short cut], select a key to be changed, and press (Edit).
Page 294 Item Operation Function Menus While Viewing a Display a website Select [URL]. Website  To copy the URL, press (Copy). While viewing a website, press (Func) Display a certificate Select [Certificates] (P.294). to display the Function menu, and from the Set Full Browser Select [Full browser set] (P.297).
Page 295 Displaying Using the URL Displaying Websites in the History Multiple Windows Up to 50 websites that have been displayed You can view several websites by switching by entering their URLs are saved in the URL windows. history. The sites can be directly accessed ...
Page 296: Changing The Display
Displaying a Frame Page Playing Back Flash You can display a website consisted of multiple You can enjoy various videos by playing back ® frames. Select a frame from the frame selection Flash Video or Flash movie on a website. display to display a page.
Page 297: Copying Text
Selecting a Portion to be Copying Text Displayed from the Entire Page Press (Action) in the Full Browser display, select [Copy text], and press Press (Action) in the Full Browser The pointer changes from “ ” to “ ”. display, select [PagePilot], and press The entire page is displayed.
Page 298: Editing A Bookmark
Saving an Image Editing a Bookmark You can save images downloaded from a You can change the title of a bookmark or URL. website in the Data Box or microSD card. From the Full Browser menu, select  A GIF image, JPEG image, PNG image, or BMP [Bookmark] a folder, press , select a...
Page 299: Setting Full Browser
You can set whether to send/receive Cookie when connecting to a website.  Under no condition will DoCoMo be held liable for any reveal of your information to third parties because of sending Cookie.  Some websites may not be displayed correctly or may be unable to use when Cookie is not set.
Page 300 From the Full Browser menu, select [Full Setting the Display Mode Browser setting] [Cookie setting] and press You can set the display mode when activating Full Browser. [Valid]: Cookie is always valid. From the Full Browser menu, select [Notify-sending]: [Full Browser setting] [Display Mode Select whether to send Cookie.
Page 301 You can set whether to send Referer when you Select [Valid in scrl]/[Invalid] and press select the link while viewing a website.  Under no condition will DoCoMo be held liable The PagePilot setting is set. for any reveal of your information to third parties because of using Referer.
Page 302 Setting Whether to Transmit Data Setting Whether to Use the Full from a Website Automatically Browser Function You can set whether to transmit data from a You can set whether to use the Full Browser website if the auto-transmission request is function.
Page 303 Playback-compatible file format What is PC Movie? File format Windows Media file Extension .WMV/.WMA/.ASF/.WVX/.WAX/ A movie (PC movie) provided for PC by Portal .ASX sites or sites specialized in movies on the Codec Video Windows Internet can be played back on the FOMA Media Video 9 terminal or saved in the microSD card.
Page 304 Playing Back a Downloading Downloading a PC Movie Type PC Movie <Download> You can download a PC movie from a website Playing Back a Streaming Type and play it back. PC Movie Select a PC movie while viewing a website and press You can play back a streaming type PC movie For the PC movie required the authentication...
Page 305 Operating method Playing Back a Saved PC Key operation/Operation by Operation Movie Motion sensor Playback Press (Play) or double-tap the FOMA terminal. You can play back a PC movie saved in PC Pause 1 Press (Pause) or double-tap Movie of the microSD card. the FOMA terminal.
Page 306 To hide the icons and guide display When you fold the FOMA terminal while playing Press (Display). When you press , you can back a PC movie, the playback is paused. switch the display. Also, while playing back a PC movie, when the Setting Whether to Play Back a PC FOMA terminal is switched to the Media style, the PC movie is displayed in the horizontal orientation.
Page 307 Data Display/Edit/ Management Using Still Image Displaying the Saved Image ..............<My picture> Display Images Using the Music Slide Show............. 307 Editing Still Images ................<Edit photo> Using Movie <i-motion> Playing Back Movie/i-motion ..............<Edit movie> Editing Movies ..................Using Chara-den What is Chara-den? ................
Page 308: Displaying The Saved Image
Icon Type Size Displaying the Saved Mini-Photo sQCIF(128 96) Image image <My picture> QCIF(176 144) QVGA(240 320) You can display images saved in My picture of CIF(352 288) the Data Box or microSD card. VGA(640 480) Press ) in the stand-by display, Stby(480 864) select [Photo] [Data Box], and press...
Page 309 To display the previous/next image The following images cannot be displayed. to display the previous image and - A JPEG image of a size of over 2592 1944 display the next image. Or single-tap and tilt the dots, GIF image of a size of over [UXGA(1600 FOMA terminal to the right or left.
Page 310: Editing Still Images
Operating method in the Normal style To change the BGM While pausing, from the Function menu, select Key operation/ Operation ](BGM) ](Data Box) [Music]/[i-motion] Operation by Motion sensor a BGM. To mute the BGM, select [ ](Silent). Play Press (Play) or double-tap the ...
Page 311: Pasting Text
Example: Pasting a frame and saving by overwriting Select a stamp and press From My picture file list, select an image, To check a stamp press , and press (Func). Move the cursor to a stamp and press (Play). The Function menu appears. to adjust the position and press (Paste).
Page 312 [Font color]: Select [Edit photo] [Zoom&trim] Select the color of a font to be pasted. size of an image to be trimmed and press [Font size]: Select the size of a font to be pasted.  The image size displayed in gray is not available [Font type]: for trimming.
Page 313 Select an image effect and press Converting the Image Size To display an image without an image effect Press (Eff. OFF). To undo it, press (Eff. You can convert an image size into [sQCIF(128 ON). 96)], [QCIF(176 144)], [QVGA(240 320)], [CIF(352 288)], [VGA(640 480)], and Press (Save), select [Overwrite], and [Stand-by(480 864)].
Page 314  The following icons show the type/size of a Playing Back Movie/ movie/i-motion and playback restrictions. Type and size i-motion <i-motion> Icon Type Size Movie/i-motion with You can play back movie/i-motion that is saved sQCIF(128 96) v i d e o a n d s o u n d in i-motion of the Data Box or microSD card.
Page 315 When the screen informing to make enough space Select a movie/i-motion and press appears Select [Yes]. Display quality To change the display quality Press . By pressing , you can switch the display quality between Normal/Sharp/Dynamic.  The following icons show the display quality. Normal Sharp Dynamic...
Page 316: Creating A Playlist
To play back from the previous/next chapter to it using the infrared or iC communication or Press to play back from the previous DoCoMo keitai datalink chapter and press to play back from the - A movie/i-motion saved from the microSD next chapter.
Page 317 Select [Add to playlist] [Save one] and Deleting/Reordering Movies/ press i-motion of the Playlist You can delete movies/i-motion from a playlist or reorder them within a playlist. Even if you delete movies/i-motion from a playlist, the files of the movies/i-motion are not deleted. To create a new playlist Example: Deleting one movie/i-motion From the i-motion folder list, select [Playlist] and...
Page 318: Editing Movies
Select a playlist and press (Func). Select [Attach to mail(S)]/[Attach to mail(L)] and press The Function menu appears. To edit the name of a playlist Move the cursor to the playlist and from the Function menu, select [Edit name]. Enter a new name within 10 full-width or 20 half-width characters.
Page 319: What Is Chara-Den
Converting the Image Size Clipping a Still Image from a Movie You can convert a [QVGA(320 240)] image size movie into the [QCIF(176 144)] image You can specify any portion of a movie and size. clip it as a still image of [sQCIF(128 96)], [QCIF(176 144)], [QVGA(320 240)], and Example: Converting the image size and saving by [VGA(640 480)] image size.
Page 320 Action lists of the preinstalled Chara-den Select a Chara-den file and press characters Full-body action Action mode icon 7: ??? To display the previous/next Chara-den If you have deleted a preinstalled Chara-den fille, to display the previous Chara-den and you can download it from “PlayNow by SO”. to display the next Chara-den.
Page 321 To switch between the jacket display and list display Playing Back Music Data From the Function menu, select [Change jackets]. <Music> To switch to the Music Player From the Function menu, select [Player mode]. You can play back music data saved in MUSIC ®...
Page 322: Playing Back A Melody
Select a melody and press Playing Back a Melody <Melody> You can play back an SMF/MFi-format melody that is saved in Melody of the Data Box or microSD card. From the Menu, select [Data Box] [Melody] and press The melody folder list appears. The selected melody is played and the indicator Select a folder and press flashes.
Page 323: Displaying/Playing Back Kisekae Tool
Select a Kisekae tool and press Displaying/Playing Back Kisekae Tool <Kisekae Tool> You can display/play back data selected from the list of contents of the Kisekae tool saved in the Data Box.  You can display the list of contents of the Kisekae tool but cannot select data to display/play back it if the Kisekae tool is saved in the microSD card.
Page 324: Displaying/Playing Back 1Seg
Select a file and press Displaying/Playing Back The selected file appears. 1Seg <1Seg> To display the previous/next file to display the previous file and display the next file. You can display a 1Seg recorded still image or play back a 1Seg recorded video that is saved Press in 1Seg of the Data Box or in the microSD card.
Page 325 Data broadcasting mode To use the Rapid play From the Function menu, select [Rapid play]. Operation Key operation  The video and sound are played back about D i s p l a y t h e while using the 1.3 times faster than normal playback.
Page 326: Microsd Card
Under other data in the FOMA terminal to the microSD no condition will DoCoMo be held liable for any loss card, as well as copy data in the microSD or modification of the data.
Page 327: Displaying Data On The Microsd Card
 When inserting/removing the microSD card, make Displaying Data on the sure to do it properly as illustrated below. Failure to do so may cause malfunction, etc. microSD card Inserting the microSD card Data saved in the microSD card can be Insert the microSD card into the slot.
Page 328: Folder Setup Of The Microsd Card
Folder Setup of the microSD card When Displaying the Folders on the FOMA Terminal : Allowed to be saved : Not allowed to be saved : Only allowed to be moved Data you can/cannot save in the FOMA terminal Category Contents of data Selected One file...
Page 329 Data that cannot be moved/saved in the FOMA terminal  You cannot save a movie/i-motion set for the Des call display and also a GIF/JPEG image set for Phonebook the Des call display if it exceeds 100K bytes or [QVGA(240 320)]. ...
Page 330 Estimated max. Category FOMA terminal folder File format FOMA terminal filename number of files to be saved (64MB) PRIVATE DOCOMO STILL SUDnnn My picture/Other images JPEG (excluding Exif), STILnnnn.JPG/.GIF/.SWF 3,875 GIF animation, SWF RINGER RUDnnn Melody/Distrib. contents MFi, SMF RINGnnnn.MID/.MLD/.SMF 3,875 DOCUMENT PUDnnn My document/Distrib.
Page 331 Data you can/ Data That Can Be Written/Read cannot save from Data you cannot save from the FOMA terminal to and from the microSD card Category the FOMA terminal and other information Selected file files files  It may take time to save data depending on the data Text size.
Page 332 Saving Data from the FOMA Saving Data from the microSD Terminal to the microSD card card to the FOMA Terminal You can copy data from the FOMA terminal to You can copy data from the microSD card to the microSD card. the FOMA terminal.
Page 333: Managing The Microsd Card
Select [Format] and press Saving a Melody and Image The Security code screen appears. You can save My picture, i-motion, Melody, Enter the Security code and press My document, MM File, and Decome-Anime (OK). template data to the FOMA terminal. Example: Saving one data item Select [Yes] and press From the microSD category list, select a...
Page 334 Using the FOMA Terminal Updating the Management Information of the microSD card with a PC <USB mode setting> If you edit, add, or delete data stored in the When you connect the FOMA terminal to a microSD card on a device other than the FOMA PC using the FOMA USB Cable with Charge terminal, it may not be displayed correctly on Function 01/02 (optional), you can use it as...
Page 335 Select [microSD mode] and press Do not format the microSD card using a PC, etc. Make sure to format it on the FOMA terminal. The microSD mode is set and “ ” changes to “ ”. Even if you set the USB mode setting to On the PC, “...
Page 336 Move the pointer to [USB Copying Data from the ] and click [ FOMA Terminal to the UIM Yo u c a n c o p y u p t o 5 0 F O M A t e r m i n a l phonebook entries and up to 20 SMS from the FOMA terminal to the UIM (FOMA card).
Page 337: Managing Data Box
Copying Data from the Managing Data Box <Data Box> UIM to the FOMA Terminal Data handled by the FOMA terminal, such as downloaded data and data recorded using You can copy UIM (FOMA card) phonebook the camera, are saved in the categories of the data and SMS from the UIM to the FOMA Data Box: My picture, MUSIC, Music&Video terminal.
Page 338 Example: Displaying the file list in the [Preinstall] folder Category Folder name Contents of data in My picture i-motion i-mode M o v i e o b t a i n e d f r o m From the Menu, select [Data Box] and a s i t e , i-mode mail, or i- ppli press...
Page 339  The following icons show the status of a folder.  The following icons show the source from where The folder name is displayed next to the icon. the file was obtained. (Yellow) Preset folder Icon Source Preinstalled data i-mode Data obtained from sites, i-mode mail, Camera or i- ppli...
Page 340 To delete a folder Creating/Deleting Folders Move the cursor to the folder and from the Function menu, select [Edit folder] [Delete You can create or delete a folder for saving folder], enter the Security code, and select [Yes]. data. Regarding the user-created folder, you To delete several folders, from the Function menu, select [Edit folder] [Select&delete],...
Page 341: Deleting Data
To move data from the microSD card to the FOMA Deleting Data terminal Move the cursor to the data and from the You can delete data using three methods. Function menu, select [Move to main] [Move  You cannot delete some preinstalled data. one].
Page 342: Sorting Data
Picture+List Picture List only Sorting Data Data in a folder can be sorted for display.  You cannot sort data in MUSIC. From the Data Box, select a category folder, press , and press (Func). The Function menu appears. Display thumbnail Display Display Select [Sort]...
Page 343 Select [Folder info] and press Enter a title at [Management title]. Enter a title within 18 full-width or 36 half-width characters. To reset the management title Press (Rset Ttl).  You can reset the management title only of the data that has an original title to be displayed. For a program of Music&Video Channel, the management title is reset to the program title.
Page 344 List of display items and items that can be edited : Can be edited : Display only : Not displayed My picture Music&Video Channel 1Seg Chaku- Chapter Chapter Movie/ Chara- Kisekae Display item Melody Description JPEG GIF SWF Program (Chaku- (Movie/ i-motion document...
Page 345 My picture Music&Video Channel 1Seg Chaku- Movie/ Chara- Kisekae Chapter Chapter Display item Melody Description i-motion document Tool JPEG GIF SWF Program (Chaku- (Movie/ Video Image ® Full Uta Full ® i-motion) Video F o r m a t a v i d e o / N o n e / N o t supported 1 Audio Format and bit rate for Chaku-...
Page 346 In Case of Insufficient Memory Checking the Memory of the FOMA Terminal If there is not enough memory when you save <Storage information> or download data or software in My picture, You can display the memory use status of the MUSIC, i-motion, melody, My document, Chara- FOMA terminal.
Page 347: About Infrared Communication
Press (Delete), select [Yes], and press Using the Infrared Communication The selected software is deleted and then downloading starts.  The FOMA terminal and the other device can be used within about 20 cm apart. The infrared data If you delete preinstalled Chara-den files, it does port must be kept pointed at the other device until not help you increase the save area.
Page 348: Data That Can Be Sent/Received Via Infrared Communication
Data That Can Be Sent/Received via Infrared Communication You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, PDF data, ToruCa card, Decome-Anime template, and Loc.service client data between mobile phones and other devices equipped with the infrared communication function. ...
Page 349: Receiving Data
1 Saved in a memory space with the smallest vacant [Add]: memory number. Save received data by adding to the existing 2 Saved in the order of date and time when they data. start. [Overwrite]: 3 Saved in the order of date and time when they The screen for confirming whether to delete the were created.
Page 350 Sending All Data Sending a Still Image Using the High-Speed Infrared Communication  It is necessary that you and the receiver determine the 4-digit authentication password beforehand. You can send a JPEG image saved in My picture of the Data Box or microSD card to the Press (Func) in the folder list of data IrSimpleShot™...
Page 351: Using The Infrared Remote Control
Using the Infrared Remote About iC Communication Control Function Once infrared remote control software is You can send and receive data by placing downloaded from a site and saved in the the FOMA terminal provided with the iC FOMA terminal, the FOMA terminal can be communication function over the FeliCa mark used as the TV or DVD player remote control.
Page 352: Sending Data Using Ic Communication
Select [Add] and press Receiving Data Using iC The Security code screen appears. Communication Enter the Security code and press (OK). Receiving Data The Authentication password screen appears. Enter the authentication password. Place the FeliCa mark “ ” of the FOMA terminal over that of the other terminal in Data exchange is started and the data is added to the existing data.
Page 353: Displaying Pdf Data
Sending All Data Displaying PDF Data  It is necessary that you and the receiver determine <My document> the 4-digit authentication password beforehand. You can display PDF data saved in My Press (Func) in the folder list of data document of the Data Box or microSD card. to be sent.
Page 354 To display the detailed information Select PDF data and press From the Function menu, select [Property]. To save PDF data From the Function menu, select [Save] place to save to. To download all PDF data that you downloaded by page From the Function menu, select [Download remains] [Yes].
Page 355 Using a Bookmark/Mark Searching a Character String of PDF Data Once you save a bookmark or mark in pages that you use frequently, you can display the Press (Search) in the PDF data display. linked page by simply selecting the bookmark or mark.
Page 356 Displaying the i Bookmark/Mark List Clipping a Still Image Example: Displaying the i bookmark list You can clip a part of the currently displayed Press (Func) in the PDF data display. PDF data and save it as a JPEG image. The Function menu appears.
Page 357: Music Playback
WMA files may not be played back again.  Under no condition will DoCoMo be held liable for handling CCCD (copy controlled CD) or when music data cannot be converted to a WMA file or other file format.
Page 358: Music&Video Channel
What is Music&Video Setting a Program Channel? When you set a desired program in advance, the program data is automatically distributed at Music&Video Channel is a service that a music night. program of up to one hour is automatically distributed during the night only by setting F r o m t h e M e n u , s e l e c t [ M u s i c ] your favorite channel in advance.
Page 359 If the communication is interrupted due to Checking/Canceling a Set weak radio wave, etc. while downloading a Program program, the FOMA terminal attempts to resume the downloading up to five times at 3-minute intervals. If the program cannot be downloaded From the Music&Video Channel menu, completely after the reacquisition, the FOMA select [Set program] and press...
Page 360: Playing Back A Program
 Image/movie of chapter Playing Back a Program  Current status (Playing back/Stopping/Pausing/ Forwarding/Reversing)  The number of the chapter being played back/ F r o m t h e M e n u , s e l e c t [ M u s i c ] The total number of chapters of the program [Music&Video Channel] and press ...
Page 361 Operation Key operation When you try to play back a program while the battery level is low, the screen for confirming Repeat playback F ro m t h e F u n c t i o n m e n u , whether to play it back appears.
Page 362: Playing Back A Program From The Data Box
Select a program and press Moving a Program to a Different The selected program is played back. Folder Downloaded programs are saved in the What is Music Player? [Distrib. program] folder in Music&Video Channel of the Data Box. Every time the You can use the Music Player to play back program is updated, the program saved in the ®...
Page 363: Transferring Music Data
Format Description Transferring a WMA File Using MP3 is an abbreviation of “MPEG-1 Windows Media Player A U D I O L a y e r - 3 ” a n d a s o u n d compression technology established You can use Windows Media Player 10/11 to by MPEG which is the working group import music data from a music CD to a PC...
Page 364: Downloading Chaku-Uta Full
C r e a t e f o l d e r s n a m e d “ P R I VAT E ” , ® About Napster appli “DOCOMO”, “MMFILE”, and “MUSIC” in this order. You can also transfer music data using ®...
Page 365: Playing Back Music Data
 If you display the music folder while you are playing Select [Data Box] and press back music data on the Music Player, the Music Player is terminated. Select a folder and press (Save).  The Music Player cannot be activated while The downloaded Chaku-Uta Full ®...
Page 366 [Songs]: Select music data and press (Play). Display the list of all music data. Select the music data. Current status (During playback/ [Top50]: Stopped) Display up to 50 tracks in the order of the The number in the list of the number of the playback times, from the highest current track/The total number of to the lowest.
Page 367 Operating method in the Media style Playback Restrictions of Music Operation Key operation Data Play Press Stop Press S o m e m u s i c d a t a i s s e t t h e p l a y b a c k Volume Press restrictions.
Page 368: Managing The Playlist
 The playback restrictions for some Uta-hodai may be Select a display to be displayed during set the renewal period for a few days after the time playback and press limit on playback has expired. During the period, Select from [Standard], [Flower Ring], [Windmill], you can play back music data without updating the [Spectrum], or [Jacket image].
Page 369 Example: Deleting one track Select an original playlist to be saved and From the Music menu, select [Playlists] press [Original playlist] a playlist and press The screen for selecting the saving method appears. [Add]: The music data list of the Original playlist appears. Newly add selected music data to the music To delete all music data data saved in a playlist.
Page 370: Changing The Music Player Settings
Select a playlist and press (Func). Select the repeat type at [Repeat]. The Function menu appears. [All tracks]: Repeat playback of all tracks in the selected To edit the name of a playlist music data list. Move the cursor to the playlist and from the Function menu, select [Edit name].
Page 371 Convenient Functions <Multiaccess> Multiaccess Feature ................Multitask Feature ..................<Multitask> <Motion sensor> Operating the FOMA terminal by Rotating or Tapping ...... Using the Lifetime Calendar ............<Lifetime Calendar> Posting on a Blog...................... 376 <Alarm> Starting the Alarm at a Specified Time ............Saving Schedules ...................
Page 372: Multiaccess Feature
Receiving Mail during a Voice Call Multiaccess Feature <Multiaccess> Multiaccess is a function that enables you to use a voice call, packet communication, and SMS functions at the same time.  For multiaccess combinations, see P.456. Voice call 1 line i-mode, i- ppli, i-mode mail, and packet 1 line communication by connecting a PC...
Page 373: Multitask Feature
Icon Function name Icon Function name Receiving a Voice Call during i-mode/ Packet Communication Bar code reader Mail Display mail When you receive a call, press Message microSD When you receive a voice call, the receive call display appears. Mail box Camera You can answer a voice call while you continue to use i-mode or packet communication.
Page 374: Switching Functions
When you execute multiple functions, you can Activating a New Function press to quit the current function. Press (MENU) during the activation of a function. Operating the FOMA Terminal by Rotating or Tapping <Motion sensor> You can perform various operations by tilting, rotating, or tapping the FOMA terminal instead of using the keypad.
Page 375: Using The Lifetime Calendar
[Incoming call/V.phone]: Using the Lifetime Calendar Set whether to allow the Motion sensor to perform operations while receiving a voice/videophone <Lifetime Calendar> call. When [Valid] is set, you can stop the ring tone or vibrator by double-tapping the FOMA The Lifetime Calendar displays an image, mail, terminal while receiving a voice/videophone call.
Page 376  When there are mail, the color defines the The Phonebook, Own number, and Schedule number of mail. saved as Secret are not displayed in the Lifetime Number of mail display Calendar. Set the Secret data display to [Display] to display the data. Background color Number of mail When you have more still images, mail, and...
Page 377 Schedule Data Displayed in the Lifetime Calendar Event outline or contents Category icon The following data is displayed in the Lifetime Alarm Calendar. Birthday - JPEG and GIF images saved in My picture of the Data Box Des call display saved - Received and sent mail saved in the FOMA terminal, in the Phonebook or images attached to SMS and received/sent mail...
Page 378 [Memory auto display]: Select the display for each item. Set the time before the item to remember is automatically displayed when a key is not Press (Complete). operated for a specific period. The LTC setting display appears. [Security data display]: Set whether to display a folder which is set the Set the time before the item to remember Mail security or Data security.
Page 379 Example: Saving a blog service manually Enter a URL for Full Browser connection From the Menu, select [1Seg/AV] [easy at [Full Browser URL]. BlogUp] and press Enter a URL including “http://” within 512 half-width alphanumeric characters and symbols. The blog service list appears. ...
Page 380 Select a blog service which supports Enter texts and press (Send). both posting a still image and text, and Mail is sent and it is posted on a blog. press (BlogUp). When 2in1 is set to the B mode, you cannot The screen for confirming whether to attach a file compose any i-mode mail.
Page 381 Enter a time to start the alarm at [Time]. Starting the Alarm at a Enter a time in 24-hour format. Specified Time <Alarm> Select the repeat type at [Repeat]. [OFF]: The alarm is activated for about one minute at Do not repeat the alarm. a specified time.
Page 382 ® When you select a Chaku-Uta Full that has a Select an indicator color at [Color]. choice of specified playback ranges from [MUSIC] Select from 12 indicator colors or [C13:ALL] The screen for selecting a type of setting (indicator flashes in 12 colors in sequence). appears.
Page 383 If another function is executed during the Alarm At the Alarm Time or Snooze operation, the alarm is stopped. The The alarm tone sounds for about one minute Snooze keeps operating within predetermined number. with the indicator flashing. When the PIN1 code setting and the Auto power To stop the alarm tone on for the Alarm are set to [ON], the FOMA Press any key.
Page 384 Select a star ting date and press Select the schedule repeat type at [ (Create). [OFF]: Do not repeat the schedule. Go to step 12. [Evd]: Repeat the schedule every day. [Week]: Repeat the schedule on the same day of the week.
Page 385 When the Schedule alarm and Alarm are set If you set an i-motion with video and sound simultaneously, “ ” is displayed instead of “ ”. tracks to the alarm tone, a movie in the i-motion is displayed. If the repeat type of the schedule set for the 31st is set to [Month], the schedule is set for the last If the alarm time comes during a voice call or day of the month for months with less than 31...
Page 386 Select [Schedule setting] [Schedule Select an alarm image from My picture/ alarm] and press i-motion of the Data Box at [Alarm image].  You can set the following files. File Category File size Image size format My picture GIF/ Max. 250K Max.
Page 387 Select the schedule and press Displaying the Schedule The saved schedule can be checked using the calendar. F ro m t h e M e n u , s e l e c t [ L i f e K i t ] [Schedule] and press Today The details of the schedule appear.
Page 388 Example: Deleting a schedule Example: Setting a specific day as a holiday or canceling the holiday setting of a day F ro m t h e M e n u , s e l e c t [ L i f e K i t ] F ro m t h e M e n u , s e l e c t [ L i f e K i t ] [Schedule] and press [Schedule] and press...
Page 389 To delete the saved function Checking the Number of Press (MENU) in the stand-by display, move Schedules Saved the cursor to the function, press (Delete), and select [Yes]. The number of schedules saved can be To reset My Selection to the default setting Reset the settings (P.395).
Page 390: Checking The Call Duration And Charge
Recording Recipient’s Voice Recording Recipient’s or during a Call Your Own Voice <Voice memo> Press during a call. Your own voice during stand-by and the The recording starts. When the recording ends, a recipient’s voice during a voice call can be beep sounds.
Page 391 Select the item and press Resetting the Total Call Duration and Charge When you place a call to a toll-free number such as NTT Free Dial or Directory Assistance (104), The display of the total call duration and “0YEN” or “ YEN”...
Page 392 When the Call Charge Exceeds the Limit Setting the Limit for Alert on the Total Call Charge When the upper limit value <Cost limit notice> of the call charge you have set is exceeded during a You can set an upper limit amount of call call or data communication, charges to alert yourself with an icon or alarm the notification icon “...
Page 393: Using The Calculator
Using the Assist Light Using the Calculator <Calculator> You can use the photo light as the Assist light You can use the FOMA terminal to perform the with the FOMA terminal folded. four basic operations of arithmetic ( , ) for up to nine digits. Fold the FOMA terminal while the stand-by Example: Calculating 64 5 display appears.
Page 394: Using A Memo
If the number is indivisible or the result of the Displaying a Memo calculation contains a decimal point and proves to be 10 digits or more, 10th digit and any more The contents of a saved memo can be digits than this are discarded for display from the checked.
Page 395 From the Menu, select [Settings] Displaying the Settings of [Application] and press Various Functions <Application> You can directly display the settings of each function and set each item. For more information about settings, see the relevant pages. Display Setting data 1Seg setting Set the functions used for 1Seg (P.285).
Page 396: Earphone/Microphone With Switch
E n t e r a m e m o r y n u m b e r f r o m t h e Selecting a Microphone Used Phonebook used for placing a voice call When Earphone is Connected at [Memory number].
Page 397: Resetting To The Default Settings
When you receive a videophone call, a substitute Using the Switch to Receive a Call image is sent to the caller. When the Record message, Voice Mail Service, When receiving a call, press the switch Call Forwarding Service, and Auto answer on the Earphone/Microphone for over a setting are set simultaneously, and if you want to second.
Page 398: Deleting All Saved Data
From the Menu, select [Settings] Deleting All Saved Data [Management] [Reset] [Reset all data&set] and press <Reset all data&set> The Security code screen appears. You can delete saved data and reset the  The Reset display also appears by pressing settings of each function to the default settings.
Page 399: List Of Reset Items
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Reset all data&set are as follows. For functions that can be accessed through the menu display, see the list of menus (P.438). : Items restored to their default settings : Items deleted Reset...
Page 400 Reset Reset all Menu Default setting Page settings data&set Camera Select save to Still image: [Camera] folder in My P.156 p i c t u re o f t h e D a t a B o x , M o v i e : [Camera] folder in i-motion of the Data Auto save Mini-Photo creator...
Page 401 Character Entry For kuten codes, see the “Kuten Code List” (PDF format) included in the supplied CD- ® ® ® ROM. You need Adobe Reader to read the “Kuten Code List” in the PDF format. If Adobe ® Reader is not installed on your PC, install it from the supplied CD-ROM, which also contains ®...
Page 402: About Entering Text
2-touch method About Entering Text Character mode Half-width Full-width The overview of the text entry is described ]: Half-width capital ]: Full-width capital here. ]: Half-width lowercase [ ]: Full-width lowercase  There are two types of text entry methods which can Common methods for 5-touch/2-touch be selected: [5-touch] or [2-touch].
Page 403: Entering Text Using The 5-Touch Method
Deleting a character Press four times. Move the cursor to the character and press  The character at the cursor is deleted by pressing for less than a second. The last character is deleted when the cursor is at the end of the text. ...
Page 404 to select [ ] and press Enter a text. Press four times: Press three times: Press five times: Press three times: Press “ ” is entered. A selection of words that are expected to succeed the word “ ” appears in the matching words list.
Page 405: Entering Common Phrases
Select [ON]/[OFF] and press Entering Common Phrases The conversion mode is changed. For common phrases, see P.455. To change the conversion mode in the text input  Common phrases that are available vary depending display, from the Function menu, select [Input on the contents to be edited.
Page 406: Editing/Saving Common Phrases
The selected pictograph is displayed on the top of Press (Edit) and edit the contents. the text input display. To select the next pictograph, Enter a common phrase within 64 full-width or 128 move the cursor to the desired one and press half-width characters.
Page 407: Cutting/Copying/Pasting Text
Copying/Cutting Text Cutting/Copying/Pasting Text Press (Func) in the text input display. The Function menu appears. The entered characters can be pasted to the other input display by cutting or copying. Select [Copy] and press The characters cut or copied are saved in the To cut clipboard and pasted when the Paste function Select [Cut].
Page 408: Saving The Frequently Used Kanji Words
Saving the Frequently Restoring the Default Used Kanji Words Settings <Save word> <Reset data> Frequently used Kanji words can be saved The FOMA terminal’s dictionary has a data in the Dictionary. Saved words are displayed learning feature. The data leaning feature in the matching words list/conversion target memorizes the frequency in which individual words by priority when you convert characters.
Page 409: Using The Downloaded Dictionary
Using the Downloaded Sorting the Downloaded Dictionaries Dictionary <Download dictionary> When you download several dictionaries, you Up to 20 dictionaries can be downloaded using can change the order of the dictionaries in i-mode for use with the FOMA terminal. When the list to display words of a frequently used enabling a downloaded dictionary, words dictionary by priority.
Page 410 Entering Text You can enter Hiragana assigned to the digits one by one by entering double digits.  For information on characters assigned to keys for the 2-touch method, see P.451. Example: Entering “ ” Change the text entry method to [2-touch]. ...
Page 411  “Deactivating the service” of the Voice Mail or Call Forwarding Service, etc. does not cancel your subscription to the service itself.  “OFFICEED” is a paid service that requires a subscription. For more information, see the DoCoMo’s website for business customers (http://www.docomo.biz/d/212/).
Page 412 Menu item Operation Using the Voice Mail Service Deactivate Select [Deactivate] [Yes]. Check setting Select [Check setting]. The Voice Mail Service takes messages for  When 2in1 is set to either the you, as long as it answers a call with the B or Dual mode, the screen for answering message, if there is an incoming selecting either Number A or...
Page 413 To put the current call on hold and answer an Notes on the service for the videophone incoming call, press (Call). When you put a When the Voice Mail Service takes a videophone call on hold, the message “Connecting” appears. message for you, it is notified to you by SMS.
Page 414 Set each item. Using the Nuisance Call Menu item Operation Blocking Service Activate Select [Activate] [Activate]/ [ S e t + A c t i v a t e ] ( E n t e r t h e The Nuisance Call Blocking Service prevents forwarding number and ring time) receiving a “nuisance call”...
Page 415 Set each item. Using the Caller ID Display Menu item Operation Request Service Switch Dual Switch the Dual Network Service to Network enable using the FOMA terminal for When you receive a voice or videophone this service. call without a caller ID, the Caller ID Display Select [Switch Dual Network] Enter the network security code Request Service answers the call with a...
Page 416 [Call Forwarding]: The Service Numbers display appears. An incoming call is forwarded to a saved ] (Contact for Repairs): forwarding number. Call the DoCoMo representative of Contact for [Call Rejection]: Repairs. An incoming call is rejected. ] (General Inquiries): Call the DoCoMo information desk of General Select an operation for an incoming call Inquiries (DoCoMo Information Center).
Page 417: Setting Remote Control
You can set to be able to operate the Voice etc. Mail or Call Forwarding Service, etc. from a general push-button telephone, public phone, From the Menu, select [Settings] DoCoMo mobile phones, etc. [Management] [NW Services] [Multi Number] [Number Setting] and ...
Page 418 Item Description Setting an Originating Phone Select an incoming image from My picture/ Number i-motion of the Data Box.  You can set the following files. You can select a phone number to be used Category File format File size Image size when you place a call.
Page 419  When you replace the UIM (From 2in1 subscriber Set each item. to 2in1 subscriber) while 2in1 is used, to obtain a correct Number B, you need to perform the 2in1 Menu Operation function OFF (P.418) first, and then set the 2in1 to item ON again.
Page 420 Menu Menu Operation Operation item item Receive Check the current setting Set call/ To identify the call placed or received using receive Number B, set the font color and ring tone of avoid. Select [Receive avoid. setting] [Check setting receive avoid.] [Yes].
Page 421 Functions Available for Each Mode The functions which only differ from each mode are listed (the functions which are common with the A mode are excluded). Service A mode B mode Dual mode Voice/ Call Number A Number B Selectable when placing a call videophone call Receive...
Page 422 <Additional service (USSD) registration> setting. 2 When the phone number of placing/receiving When DoCoMo adds a new network service, a call or sending/receiving SMS and mail you can save the service in the Menu and use address of receiving/sending mail are saved...
Page 423 PC Connection For detailed information on Data Communication, see the “Manual for PC connection setting” (PDF format) included in the supplied CD-ROM or available on the DoCoMo’s website. ® ® You need Adobe Reader to read the “Manual for PC connection setting” in the PDF format.
Page 424: Data Communication
01/02 (optional) and making the necessary Data Communications Which Can settings. Use a FOMA packet communication- Be Used by the FOMA Terminal compliant access point such as DoCoMo’s Internet connection service “mopera U”/ Data Transfer (OBEX™ Communication) “mopera”. You can also exchange data by...
Page 425 Internet service Access Authentication for the Use of a provider. Browser You can use DoCoMo’s Internet connection When a FirstPass-compatible site that you service “mopera U”/“mopera”. access through the Internet browser on your To use “mopera U”, you need to subscribe to PC requires the FirstPass (user certificate) as this service (paid service).
Page 426: Before Using Data Communication
(for using in Japan). (optional) or FOMA USB Cable (optional) - The FOMA USB Cable with Charge Function 01/02  Supplied CD-ROM “FOMA SO906i CD-ROM” (optional) can be used on your PC. - Your PDA must have FOMA packet and 64K data Use the exclusive “FOMA USB Cable with...
Page 427: Preparations And Flow Of Data Transfer (Obex™ Communication)
Install the FOMA communication configuration files (USB drivers). (USB drivers).  Install from the supplied CD-ROM  Install from the supplied CD-ROM  Download from the DoCoMo’s website and install  Download from the DoCoMo’s website and install Connect the FOMA terminal to a PC. Data transfer Check the installed FOMA communication configuration files.
Page 428: At Commands
CD-ROM. keitai datalink <Software/PDF> FOMA communication configuration files “DoCoMo keitai datalink” software is used to FOMA PC setup software make backup files of the Phonebook and mail, FOMA byte counter etc. to a PC from your FOMA terminal and edit General information about DoCoMo keitai datalink the data on the PC.
Page 429 Overseas Use Overview of International Roaming (WORLD WING) ..........428 Services Available Overseas ................... 428 Before Using the FOMA Terminal Overseas ............429 Placing a Call from Your Overseas Location ............432 Receiving a Call ....................... 432 Setting the Network to be Used ............<3G/GSM setting>...
Page 430: Services Available Overseas
“Mobile Egypt Philippines Phone User’s Guide International services ”. Fiji Russia Also, at the DoCoMo’s “International service Finland Singapore website”, you can check the latest information France Spain of international services as well as download...
Page 431 4 64K data communication to be performed by Communication service 3G GSM GPRS connecting to a PC is not available overseas. Voice call 1 When you originate the packet communication, You can use the same mobile use the IP connection to communicate (the phone number as used in Japan PPP connection cannot originate the packet even from an overseas location to...
Page 432  For the latest information on the international (P.411) access number and international prefix number Bar Nuisance Calls for the universal number, see the DoCoMo’s (P.412) “International service website”. Notify Caller ID You may not be able to set the International access number for major countries (P.50)
Page 433 FOMA network (DoCoMo).  If the Network search mode is set to [Manual], manually switch to the FOMA network (DoCoMo) or change the setting to [Auto] (P.433).  You need to set to [Auto] or [3G] at the 3G/GSM...
Page 434: Receiving A Call
F o r i n f o r m a t i o n a b o u t c o u n t r i e s a n d phones, etc. in Italy). carriers you can connect to, see DoCoMo’s  To place an international call to Japan, enter the “International service website”.
Page 435 Select [Auto]/[3G]/[GSM/GPRS] [Yes] If you receive a call during international roaming, the call is forwarded to the country of your and press stay from Japan. There is a communication The network communication method is set. charge to the caller for the call to Japan and an international call forwarding charge to the When the 3G/GSM setting is set to [Auto] and recipient.
Page 436 Even if you set the Operator name display to [Display on], the carrier name is not displayed To save the carrier being connected when you are using the “DoCoMo” network or From the Function menu, select [VPLMN to you are outside of the service area.
Page 437: Rejecting An Incoming Call
Checking the Communication Rejecting an Incoming Call Status during Roaming <Check service area> <Bar Incoming call> You can check the available network services You can set whether to reject incoming calls in your overseas location. during roaming. You can select whether to reject either all incoming calls or only incoming From the Menu, select [Settings] videophone calls.
Page 438 Set each item. Using the Network Services Menu item Operation during Roaming <Oversea service> Activate S e l e c t [ A c t i va t e ] [ Ye s ] Operate as instr ucted by the You can use network services such as the guidance.
Page 439 Appendix/External Devices/Troubleshooting List of Menus ......................438 Characters Assigned to Keys (5-touch method) ............450 Characters Assigned to Keys (2-touch method) ............451 Special Symbols ...................... 452 Pictographs ......................453 Emoticons ........................ 454 Common Phrases ....................455 Multiaccess Combinations ..................456 Multitask Combinations ...................
Page 440: List Of Menus
Use phone information P.174 i-motion auto replay P.178 Sound effect P.105 i-mode arrival act Prefer PushTalk P.88 SSL list CA cert. Valid P.175 DoCoMo cert.1 Valid DoCoMo cert.2 User cert. Valid User certificate Select host 1 P.177 Full Home P.290 Browser Bookmark PlayNow 2 P.296...
Page 441 P.206 to: None Sort outbox Sorting criteria/Select folder to: None Language P.216 setting SMS report Invalid Validity 3days SMSC DoCoMo Type of Number International Address 81903101652 Area Mail Receive setting P.213 setting Receive entry Emergency information 4 P.214 Beep time 10sec 2 Preinstalled data is not deleted.
Page 442 Reset Reset all Menu Default Setting Page settings data&set Mail Mail Recv option setting P.208 setting Attached Image Valid P.209 [3 ] file pref. Melody Valid i-motion Valid ToruCa Valid Valid Tool data Valid Others Valid i appli ppli list 5 P.219 ppli Auto-start...
Page 443 Reset Reset all Menu Default Setting Page settings data&set Osaifu- IC card content [81] P.237 Keitai DCMX [82] P.227 ToruCa [83] P.238 Settings IC card IC card lock P.245 [84] lock IC lock(power-off) Last status IC act. By vibrator P.244 notice By LED ToruCa...
Page 444 Reset Reset all Menu Default Setting Page settings data&set LifeKit [9#] GPS Sound/Color setting Position location: P.106 settings Positioning tone: GPS sound(Normal), Volume: OFF, Ring time: 3sec, Vibrator: OFF, Color: ON, Color: C9 Location notice: Positioning tone: GPS sound(Normal), Volume: 4 , R i n g t i m e : 3 s e c , Vibrator: OFF, Color: ON, Color: C9...
Page 445 Reset Reset all Menu Default Setting Page settings data&set Settings Display Backlight/ Illumination Set: ON, Set all illumination: P.114 Illumi. Individual illumi.: Time signal: All(Smooth), Alarm: Roll(Sparkle), Incoming call: Roll(SmoothA), Incoming V. p h o n e : R o l l ( B l o c k A ) , R e c e i v e m a i l / m e s s a g e : Down(SmoothA), PushTalk: Roll(Skip), Talking: Blink(Top),...
Page 446 Reset Reset all Menu Default Setting Page settings data&set Settings Call Incoming Incoming V.phone Link incoming call: OFF, P.102 Ring tone: 1, Ring volume: 4, Incoming image: Kisekae tool 10, Vibrator: OFF, Color: C9:Color9 PushTalk Ring tone: 1, Ring volume: 4, Vibrator: OFF, Color: C9:Color9 Mail Receiving img: Kisekae...
Page 447 Reset Reset all Menu Default Setting Page settings data&set Settings Call Call setting Holding setting H o l d t o n e : S t a n d a r d P.70 m e l o d y, V. p h o n e h o l d image: Setting when folded V o i c e c a l l / V.
Page 448 Reset Reset all Menu Default Setting Page settings data&set Settings Application Schedule Set holidays For today: Annual holidays P.386 e s t a b l i s h e d b y t h e Japanese National Holidays Law, Day of the week: Sun Schedule alarm Alarm tone: Alarm(std), P.384...
Page 449 Reset Reset all Menu Default Setting Page settings data&set Settings Management NW 2in1 setting M o d e s w i t c h i n g : D u a l P.417 Services mode, Stand-by for dual mode: B mode: Star Candle Dual mode: Colorful Balls Set call/receive No.: Disp.
Page 450 Reset Reset all Menu Default Setting Page settings data&set Settings Management NW Int'l roaming N e t w o r k s e a rc h m o d e : P.433 Services Auto, 3G/GSM setting: Auto Operator name display: P.434 Display on Int’l dial assist...
Page 451 Reset Reset all Menu Default Setting Page settings data&set Settings Management Reset Reset menu log P.119 Reset menu screen P.118 Reset display/sound Reset settings P.395 Reset all data&set P.396 Initial Date/time P.48 setting Change code Yet (0000) Keypad sound Location request Yet (OFF) All font size setting Yet (Medium(Nomal))
Page 452: Characters Assigned To Keys (5-Touch Method)
Characters Assigned to Keys (5-touch method) Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys – , – , Display character assignments in the reverse order (before acceptance of characters)/Line feed (after acceptance of characters) Move cursor left Move cursor right/Insert half-width space (blank) (only when there is no character after the cursor) If you press a key for over a second, the assigned characters are switched one after another.
Page 453: Characters Assigned To Keys (2-Touch Method)
Characters Assigned to Keys (2-touch method) Full-width capital mode Half-width capital mode Second digit (Key to be pressed second) Second digit (Key to be pressed second) Press to change the capital mode and lowercase mode. Characters marked with can be entered as capital or lowercase depending on the mode. ...
Page 454: Special Symbols
Special Symbols  Symbols marked with may not be displayed correctly when sending to i-mode non- compatible mobile phones or PCs. Full-width symbols Half-width symbols...
Page 455: Pictographs
Pictographs  Pictographs may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs.  Some pictographs may not be displayed correctly depending on the type of recipient’s i-mode compatible mobile phone.  For SMS, pictographs other than “ ”, “ ”, or “ ” are replaced with a half-width space (blank). Pictographs...
Page 456: Emoticons
Emoticons When you enter the following words in the kanji/hiragana mode, emoticons are entered.  Some of the following emoticons may be different from those actually displayed.  Emoticons may be displayed in the ImgSym tab rather than in the Pre. tab. Word Emoticon Word Emoticons Word...
Page 457: Common Phrases
Common Phrases Category Common phrase Internet Emoticon1 Emoticon2 Emoticon3 Greetings Business Private Reply Original...
Page 458: Multiaccess Combinations
Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress.  The FOMA terminal may not operate as indicated in the table below depending on its condition. : Available : Unavailable : Available depending on the conditions Another event or task Playback Voice...
Page 459 If you subscribe to the Call Waiting Service, you can place a call to another recipient while you already have a call in progress. If you subscribe to the Call Waiting Service, you can receive another call while you already have a call in progress.
Page 460: Multitask Combinations
Multitask Combinations The table below indicates whether another function is available for each function from the menu display.  The FOMA terminal may not operate as indicated in the table below depending on the status of each function.  Some functions may pause temporarily when they are not displayed in the display even if already activated.
Page 461: Services Available On The Foma Terminal
Services Available on the FOMA Terminal Service Phone number Number guide service (paid: service charge + call charge) (no area code) 104 Phone numbers of customers who declined to disclose their number information cannot be guided.) Telegram service (paid: telegram fee) (no area code) 115 Time (paid) (no area code) 117...
Page 462: Optional And Related Devices
2 For use overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. 3 FOMA In-Car Hands-Free Cable 01 is required to connect to FOMA SO906i using USB or charge FOMA SO906i. 4 If you use USB HUB, it may not work properly.
Page 463: Introduction Of Movie Player Software
Introduction of Movie Player Software To play back a movie (MP4 format file) on a PC, you need QuickTime Player (free) ver. 6.4 or later (or ver. 6.3+3GPP) from Apple Computer, Inc. You can download QuickTime from the following website. http://www.apple.com/jp/quicktime/download/ ...
Page 464 Trouble Cause and Remedy  If multiple images are set for the incoming image for voice/ An image other than that you set is displayed for an incoming call. videophone call, the image is displayed in the following order of priority (P.92, 96, 102).
Page 465: Error Messages
Error Messages  In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Authentication type is not Cannot support content supported (401)  Data that is not supported ...
Page 466 Connection failed (503) Could not find channel  Failed to connect to a line due  Failed to search any broadcast to a network problem. Retry to station in the current area. Data in IC-card is full. Unable connect after a while. to display program guide Could not move Connection failed (562)
Page 467 Invalid data. Data size is not supported (XXX)  Failed to display because of Error has occurred p p l i s t a n d - by d i s p l ay an error in the received data. terminated due to security ...
Page 468 Manner mode is set No files  Failed to adjust the volume  For the Music slide show, because the Manner mode is only JPEG images can be Lock all set. Cancel the Manner mode displayed. Either save a JPEG ...
Page 469  The PUK code is locked. e x c e p t f o r a n s w e r i n g a n (P.345). Contact the nearest DoCoMo incoming voice or videophone shop (P.123). No response (408) call and powering on/off ...
Page 470 Replay period has expired R u n s o f t wa r e a n d d e l e t e Services are full. MUSIC of data in IC card. Then delete overwritten service is unable  This file is provided with an software to play.
Page 471  The number of SMS saved Contact our service counter server name. Select [Yes] to (DoCoMo shop, etc.). in the UIM has reached the connect or [No] to cancel to maximum number. Delete Time out connect.
Page 472 Unable to display this program Usage is currently restricted. guide Try again later  When 2in1 is set to the B  Users of the flat-rate i-mode mode, you cannot run the packet service may not be program guide i- ppli with able to connect during certain mail or using mail.
Page 473: Warranty And After Sales Services
Phonebook, at the Data Security Service Center. If you have a PC, you can use the DoCoMo keitai datalink (P.426) and the FOMA USB Cable with Charge Function 01/02 (optional) or FOMA USB Cable (optional) to transfer data saved in the Phonebook and other memory from the FOMA terminal to the PC and save data in the PC.
Page 474 If the FOMA terminal has gotten wet or moist, immediately power off the terminal and remove the battery pack from it, and then bring it to the DoCoMo repair handling service counter as soon as possible. However, note that we may not repair the FOMA terminal depending on the extent of the damage.
Page 475: (I-Mode Trouble Diagnosis) Site
No packet communication charge is required for updating software. If the software update is necessary, we inform of it on DoCoMo’s home page and in “ ” (Information) accessible from i Menu. You can use one of the three update types: “Auto-update”, “Now update”, “Reserve”...
Page 476 (You can receive a voice call while downloading the software.)  The FOMA terminal uses SSL communication with the DoCoMo server to update the software. Before starting update, set the SSL list to [Valid] (Default: [Valid]) (P.175).
Page 477 Updating the Software Automatically (Auto-update) Download new software automatically and rewrite old one with it at the previously set time. When the status is changed to be ready to rewrite, “ ” appears. After you check the time of rewriting, you can change the time or select whether to rewrite right away. From the Menu, select [Settings] [Management] [SW Update] and...
Page 478 To activate the software update Press (Link) in the stand-by display, select “ ”, and select [Yes]. The notification icon of the SW Update appears only when DoCoMo notifies software update. Activating the Software Update From the Menu, select [Settings] [Management]...
Page 479 Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press After a while, the software download starts.  When downloading starts, step 2 is performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
Page 480 Select the date/time to be reserved [Yes] and press The FOMA terminal connects to the server and completes the reservation. When the Reserved Time Comes The screen to the left appears. After about five seconds, the software update starts automatically and the incoming indicator flashes. ...
Page 481: Protecting Your Mobile Phone From Harmful Data
Protecting Your Mobile Phone from Harmful Data <Scan function> At first, update the pattern definitions to get the latest definitions. You can detect information related to the data and programs obtained into the FOMA terminal from an external source, such as data downloaded from a site or i-mode mail, and delete data or end the start-up of application that can cause a trouble.
Page 482 When you update the pattern definitions, your FOMA terminal-specific information (such as model and manufacturer’s serial number) is automatically sent to the server (server for the scanning function under DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than the scanning function.
Page 483 If the Set auto-update is set to [Valid], “ ” (Update completed) appears in the stand-by display when the pattern definitions auto-update is completed. If the pattern definitions were not auto-updated successfully, “ ” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification.
Page 484: Specifications
Specifications FOMA terminal Product name FOMA SO906i Dimensions 103 49 18.0 mm (H W D) (when folded) Weight About 129 g (with battery pack attached) Continuous Network 3G/GSM setting stand-by FOMA/ Moving state: About 390 hours time Auto Moving state: About 390 hours Stationary state: About 590 hours...
Page 485: Number Of Saved And Protected Data Items
4 It is the maximum recording time per one movie under the following conditions: Image size: [sQCIF(128 96 dots)] Shoot mode: [Image+Sound] Image quality: [Standard] File size: No limit 5 Playing back music in the background is supported. Battery pack Product name Battery Pack SO02 Type of battery...
Page 486: Sar Certification Information
About the Specific Absorption Rate (SAR) of Mobile Phones, etc. Mobile Phone GSM/GPRS 900/1800/1900&UMTS JP/EU/US SAR Certification Information This model phone FOMA SO906i meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
Page 487 The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves.
Page 488 For more information on SAR, please refer to the safety chapter in the User’s Guide. SAR data information for residents in countries that have adopted the SAR limit recommended by the International Commission of Non-lonizing Radiation Protection (ICNIRP), which is 2 W/kg averaged over ten (10) gram of tissue (for example European Union, Japan, Brazil and New Zealand): The highest SAR value for this model phone tested by Sony Ericsson for use at the ear is 0.27 W/kg...
Page 489: Guidelines For Safe And Efficient Use
Guidelines for Safe and Efficient Use Please read this information before using your mobile phone. These instructions are intended for your safety. Please follow these guidelines. If the product has been subject to any of the conditions listed below or you have any doubt as to its proper function make sure you have the product checked by a certified service partner before charging or using it.
Page 490 Power supply (Charger) Connect the AC power adapter only to designated power sources as marked on the product. Make sure the cord is positioned so that it will not be subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. The AC power adapter must not be used outdoors or in damp areas.
Page 491 Emergency calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. You should therefore never rely solely upon any mobile phone for essential communications (e.g. medical emergencies). Emergency calls may not be possible in all areas, on all cellular networks, or when certain network services and/or mobile phone features are in use.
Page 492 Please adjust the audio volume cautiously when using third-party audio accessories to avoid volume levels that may be harmful to your hearing. DoCoMo does not test use of third-party audio accessories with this mobile phone. DoCoMo recommends using only DoCoMo’s original audio...
Page 493: Fcc Statement For The Usa
FCC Statement for the USA: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 494: Export Controls And Regulations
Declaration of Conformity for SO906i We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type AAD-3724011-BV and in combination with FOMA global AC charger 01(MODEL:MAS-BH0008-A 002), to which this declaration relates is in conformity with the appropriate standards EN 301 511:V9.0.2, EN 301 908-1:V2.2.1, EN 301 908-2:V2.2.1, EN 301 489-24:V1.3.1, EN 301 489-7:V1.3.1, EN 301 489-3: V1.4.1, EN 302 291-2:V1.1.1, and EN 60950-1:2006, following the provisions of, Radio Equipment...
Page 495 Index/Quick Manual Index ........................494 Quick Manual ......................504...
Page 496 Index How to Look up in the Index The index can be used as an “alphabetical table of contents”. Under each headword, terms relevant to it are listed. Not only terms representing function names actually displayed on the FOMA terminal, but also those that are a brief summary about the functions described in this manual.
Page 497 Photo light ....153 Check IC owner ....238 Photometry ....155 Check new message Cache ....... 164 Picture effect ....155 ......194, 211 Calculator ......391 Reset all ....... 155 Animation ..... 112 Calendar ....111, 385 Reset file No....158 i-mode inquiry set ..
Page 498 Display rotated appli ..387 English Guidance Service Home URL ....297 Display sites ..... 163 ........413 Key Operations while DoCoMo keitai datalink ..426 Error messages ....463 viewing ..... 290 Download Error messages ....463 PagePilot ...... 295 ®...
Page 499 Script setting ....298 Headset setting ..107, 394 Display img ....174 Search ......295 Headset sw. to call .... 394 Display sites ....163 Set auto NW trans..300 Headset usage setting ..107 Download ..... 171 Sound effect ....
Page 500 Dur multi task disp ..209 Chapter list ....314 Auto-start...... 228 Edit folder ..... 201 Continuous play ... 312 Certificates ....220 File attachment ..190, 196 Data security ....132 Change display .... 232 Font size ....... 120 Delete ......
Page 501 Folder info ....341 Detail ......341 Multiaccess ....... 370 Move ......338 Edit folder ..... 338 Combinations ....456 Sort ....... 340 Folder info ....341 Multitask ......371 Kuten codes ...... 405 iC transmission ..... 350 Combinations ....458 Move ......
Page 502 Folder info ....341 NW Services ..... 409 Phone To function ..... 172 iC transmission ..... 350 Phonebook ......90 i-mode bookmark ..353 2-touch dial ....99 Mark ......353 Attach to mail ....190 Move ......338 OBEX™ communication ... 422 Copy to Main ....
Page 503 Priority ..104, 119, 277, 380 Detail info ....... 60 Display ......385 Program guide ....275 Font size ....... 120 iC transmission ..... 350 Public mode (Drive mode) Recnct ALM ......66 Memory status....387 ........70 Record message ....73 Save .....
Page 504 Save ......215 Edit common phrases ... 404 Save ......330 SMS setting ...... 216 Edit dictionary ....406 Search ......241 Soft key ......110 Full/Half size ....400 Send Ir data ....347 Software update ....473 Input method ....407 Sort .......
Page 505 Hands-free ....56, 77 Sound effect ....286 Symbols and Numbers Holding ......69 Switch sound ....274 Holding setting ....70 ........57 T.shft ......283 Incoming set ....102 key(long press)....387 Timer recording .... 276 Missed call ..... 72 key(long press)....
Page 506 Quick Manual Using the Quick Manual To bring the Quick Manual provided with this manual, separate it at the tear-off line and fold as shown below. You can conveniently bring the Quick Manual “Overseas Use” with you when you are overseas and using the international roaming service (WORLD WING).
Page 515 For access using i-mode, no packet communication charge is required, except for from abroad. For access from a PC, the “DoCoMo ID/Password” are required. If you have not yet obtained the “network security code” or “DoCoMo ID/Password”, or you forget them, call the “General Contact” on the backcover of this manual.
Page 517 This manual provides instructions on how to install the “FOMA communication configuration files” and “FOMA PC Setup Software” that are both included in the supplied CD-ROM as well as information necessary for performing data communication on the FOMA SO906i. Operating procedures and window examples may partly differ depending on your PC environment.
Page 518: About Data Communication
 The FOMA terminal does not support FAX communication. A charge applies to this type of communication based  If you are going to connect the FOMA terminal to DoCoMo’s on the duration of a communication. “sigmarion ”/“sigmarion ”/“musea” PDA to perform data You can per for m 64K data communication by communication, you should update “sigmarion ”/“musea”.
Page 519 ISDN synchronous 64K data communication support. FOMA USB Cable (optional) Note, however, that even if you comply with the  Supplied CD-ROM “FOMA SO906i CD-ROM” above conditions, you may not be able to perform communication if the base station is congested or radio Purchase the exclusive “FOMA USB Cable with Charge...
Page 520: Preparations And Flow Of Data Communication
Install the FOMA communication configuration files (USB drivers) (P.4).  Install from the supplied CD-ROM  Install from the supplied CD-ROM  Download from the DoCoMo’s website and install  Download from the DoCoMo’s website and install Connect the FOMA terminal to a PC (P.4).
Page 521: Connecting The Foma Terminal To A Pc
The “SO906i_USB_Driver” folder appears. Charge Function 01/02 Double-click [FOMAinst.exe]. Disconnecting the FOMA USB Cable with Charge The Terms of Use for FOMA SO906i USB Driver appears. Function 01/02 Check the contents and click [ ] to accept Make sure to pull out the FOMA USB Cable with the terms.
Page 522 The “SO906i_USB_Driver” folder appears. Double-click [FOMAinst.exe]. The user account control window appears. Click [ The Terms of Use for FOMA SO906i USB Driver appears. Check the contents and click [ ] to accept the terms. The screen for confirming the connection between the PC and FOMA terminal appears.
Page 523: About The Foma Pc Setup Software
Universal Serial Bus controller Click [OK].  The COM port number may be different depending on When you failed to install the software or “FOMA SO906i the PC. USB” does not appear on the window in step 2, perform the following operations.
Page 524  Confirm that the FOMA communication configuration files are installed properly on the PC (P.5). Example: When using Windows XP Set “FOMA SO906i CD-ROM” in the CD-ROM drive of the PC. After installation of the FOMA PC setup software, the “...
Page 525 PC and recognized properly Click [ ] and (P.4, 5). then double-click [ Example: When using Windows XP Select [NTT DoCoMo FOMA PC ] and Click [ [FOMA click [ [FOMA PC Check the name of the program to be deleted and...
Page 526 Click [OK]. Easy Setup (Packet Communication)  When you performed the optimization in step 7 to 8, you  Note that packet communication could be expensive if you need to restart the PC. exchange large volumes of data such as viewing sites or Internet home pages that contain images or downloading When Using Other Providers files.
Page 527 ID] and [ ], enter the appropriate “<” “>” “|” “”” and “!”. information supplied by your provider accurately with  If [FOMA SO906i] is not set for [ ], select careful attention to the letter case. [FOMA SO906i].  To connect to “mopera U” or “mopera”, your caller ID must be notified.
Page 528 To start from the Start menu “?” “<” “>” “|” “”” and “!”. Windows XP Click [ Select [FOMA SO906i]. Windows 2000 Enter the line phone number of your provider. C l i c k [  E n t e r i n f o r m a t i o n s u p p l i e d b y y o u r p ro v i d e r accurately.
Page 529 Select the dial-up connection to be optimized and Disconnecting Communication click [ Sometimes, closing the Inter net browser does not disconnect communication. To ensure the disconnection of communication, perform the following procedure. Click the dial-up icon in the task tray. Click [ The connection is disconnected.
Page 530: Setting Communication Using The Foma Pc Setup Software (When Using Windows Vista)
PC (P.5). The host (APN) is loaded from the FOMA terminal. Wait for a few moments. Set “FOMA SO906i CD-ROM” in the CD-ROM drive of the PC. Set a host (APN). To add a host (APN)
Page 531 (Internet Explorer - Security Warning) window appears Click [ ] to continue the installation. The screen for notifying the unknown publisher appears, Select [NTT DoCoMo FOMA PC ] and however, causing no problem for use. click [ The user account control window appears.
Page 532 When Using Other Providers Easy Setup (Packet Communication)  Note that packet communication could be expensive if you Start the FOMA PC setup software and click [ exchange large volumes of data such as viewing sites or Internet home pages that contain images or downloading files.
Page 533 “<” “>” “|” “”” and “!”. careful attention to the letter case.  If [FOMA SO906i] is not set for [ ], select [FOMA SO906i].  To connect to “mopera U” or “mopera”, your caller ID must be notified.
Page 534 ] and select [ ] at [ “?” “<” “>” “|” “”” and “!”. Select a dial-up connection and click [ Select [FOMA SO906i]. Enter [ ] and [ ], and click [ Enter the line phone number of your provider.
Page 535: Setting Communication Without The Foma Pc Setup Software
The host (APN) is information that must be saved in the Disconnecting Communication FOMA terminal. When you use the PC with a different Sometimes, closing the Inter net browser does FOMA terminal connected, it is required to save it again in the new FOMA terminal.
Page 536 Enter a dummy (nonexistent) phone number (such Setting ON/OFF for the Notify Caller ID as “0”) at [ ], select [FOMA SO906i] at [ ], and click [OK]. The caller ID is important personal information. Carefully decide whether you want to notify a recipient The connection window appears.
Page 537  When multiple modems are connected to a PC, put a Double-click the [ ] icon. checkmark only for [ - FOMA SO906i] at [ The location information window appears.  Remove the checkmark from [  The network connection wizard appears for the second time and later.
Page 538 Check whether [ Select the created host icon and then click the [ ] is set to [FOMA SO906i] and click ] menu Check each item of the [ ] tab.  This window may not appear on some operating ...
Page 539 ] tab. When Using Windows Vista  When multiple modems are connected to a PC, put a Click [ checkmark only for [ - FOMA SO906i] at [ Click [  Remove the checkmark from [ Select [ and click [ Click [ - FOMA SO906i].
Page 540: At Commands
Input mode of AT commands Performing the Dial-up Connection To operate the FOMA terminal using AT commands, set Connect the FOMA terminal to a PC before starting this the PC to the terminal mode. operation. The terminal mode is used for operating a PC as a communication terminal.
Page 541: At Command List
AT Command List AT commands that can be used for FOMA SO906i are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value.
Page 542 Command Outline/Parameter Input example AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service) AT+CGEQMIN=2,,384,3648 notified from the network when packet communication is established. AT+CGEQMIN=2,,384 AT+CGEQMIN=2,,,3648 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGEQMIN= packet communication AT+CGEQMIN=<cid>...
Page 543 Disconnects packet or 64K data communication. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communication.
Page 544 Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
Page 545 Extended result codes List of Reasons for Disconnection &E0 Packet communication Displays the connection speed between the FOMA terminal and the base station. Value Reason Numeric value indication Text indication Connection speed An APN is not found or is incorrect. CONNECT 32000 32,000bps Disconnected from the network.
Page 546: Kuten Code List
FOMA SO906i ® Kuten Code List ’08.5 (Ver.1) A-CY6-100-11(1)
Page 547 In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “ ” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).

NTT docomo FOMA SO906i User Manual

Easy Search (P.4)

Before Using the Foma Terminal

Before Using the Handset

Pushtalk

Camera

Table of Contents

I- Ppli

Table of Contents

Data Display/Edit/ Management

Music&Video Channel/ Music Playback

Convenient Functions

Character Entry

PC Connection

Appendix/External Devices/Troubleshooting

Quick Links

Chapters

Related Manuals for NTT docomo FOMA SO906i

Summary of Contents for NTT docomo FOMA SO906i