Setting The Pc - NTT docomo FOMA N702iS Manual

Setting the PC

The following procedure explains how to connect the FOMA terminal to PC and how to install
the N702iS communication setting file (drivers).
Connecting the FOMA terminal to PC
Start up Windows and insert the "CD-ROM for FOMA N702iS" in the
1
CD-ROM drive of your PC
Click " 終了 " (Exit) to exit from
2
the "FOMA N702iSご利用にあ
たって" (To use FOMA N702iS)
screen
This screen usually appears automatically
when the "CD-ROM for FOMA N702iS" is
inserted in the drive. If it does not appear,
simply proceed to Step 4.
If this screen appears while you are installing
the N702iS communication setting file, click " 終
了 " (Exit) as well.
Click " 終了 " (Exit) to close " お問い合わせ先 " (Inquiries) screen
3
Turn on the FOMA terminal, then connect the FOMA USB Cable
4
(optional) to your FOMA terminal
Connect the FOMA USB Cable to the USB terminal of the PC
5
" 新しいハードウェアの検出ウィザード " (Find new hardware wizard) screen appears.
8