NTT docomo FOMA N702iS Manual page 99

Other ID screen
Other ID screen (P.96) p(FUNC) Select any item:
1
Look-up address......Enters the address referring to the phonebook, Dialed and Received calls records.
Delete this......Deletes one ID.
Delete all......Deletes all IDs.
The "Set" setting is set to "OFF" if all IDs are deleted.
Performing remote observation
● To perform remote observation, you should always make a videophone call with caller ID (phone number)
notification provided from the FOMA terminal registered as the other ID on the receiving phone.
● When your FOMA terminal is used to receive the remote observation, images and sound from the dialing phone are
both played.
Make a videophone call to the receiving phone
1
１ｍ３２ｓ
１７：２３
Ｃｈａｎｇｅ ＦＵＮＣ
Dialing phone
N
Calls from the phone number stored in the Remote observation settings can be received as a remote observation call even when All
lock is set.
If caller ID notification is not provided, the call is received as a normal videophone call and not as a remote observation call.
Remote observation cannot be performed if any of the following functions is set at the same time:
・ Public mode (Driving mode) ・Manner mode ・Call rejection/acceptation*
*1: When "Call acceptation" is set for a phone number other than the other ID phone number or "Call Rejection" is set for the other ID
phone number, or when "Reject unknown" is set and the other ID phone number is not stored in the phonebook.
If Remote observation, Record message and Automatic answer functions are set at the same time, the priority is given to Remote
observation.
If an earphone/microphone with switch is connected to the FOMA terminal, received sound is played through the earphone and the
speaker regardless of the "Earphone" setting (P.118).
Specific ring tone for Remote observation is used and cannot be modified.
Ring tone is played at the volume set in "Video-phone" in "Ring volume" (if the ring volume is set to "Silent", "Level 1" or "Step", the
remote observation volume is set to "Level 2").
When receiving a call for remote observation, the flashing color is set to "Gradation" and the flashing pattern is set to "Standard",
regardless of the "Illumination" settings.
You cannot put the call on hold while receiving a call for remote observation. Press y to end the call.
If Remote observation is set to "ON" on the receiving phone, a videophone call received from the phone number stored as the other ID
is logged in the Received calls record as a remote observation call. If remote observation was not triggered by the call, it is logged as
a missed call record for videophone in the Received calls record.
You cannot receive a voice call or videophone call on the receiving phone during remote observation. Voice calls or videophone calls
not received during remote observation are logged as missed calls and stored in the Received calls record, and the "Missed call"
desktop icon appears on the standby screen.
When the FOMA terminal is folded during remote observation, the terminal operates as specified in "Fold setting". However, when an
earphone/microphone with switch is connected to the FOMA terminal, the "Fold setting" specification is ignored and the FOMA
terminal sends a substitute image to the other party when it is folded.
You cannot switch cameras from the receiver during remote observation.
After the ringing time set on the receiving phone has elapsed, remote observation begins.
The video image from the receiving phone is displayed and the sound comes from the speaker
on the dialing phone. By using an earphone/microphone with switch (optional), you can listen to
the sound from the receiving phone through the earphone.
■ To answer a videophone call (with camera image) on the receiving phone
without triggering remote observation
Answer by pressing o(
To answer with a substitute image, press d(Subst.).
) or r before the ringing time has elapsed
1 1
・Reject unknown*
97