NTT docomo FOMA N702iS Manual page 79

Table of Contents

Advertisement

<Public mode (Power OFF)>
Using the Public mode (Power OFF)
The Public mode (Power OFF) is an automatic answering service provided to keep manner in public
circumstances. During Public mode (Power OFF), a caller who made a call while the FOMA terminal is turned
off hears a message that you cannot answer the call because you are in the place you have to turn off the
mobile phone (in the hospital, on the airplane, around the priority seat on the train, etc.), then the call ends.
On the standby screen w25251 r
1
Public mode (Power OFF) is set. (Nothing changes on the standby screen.)
When you receive a call after setting Public mode (Power OFF) and turning off the FOMA terminal, the caller hears the
message "The person you are calling is currently driving or in an area where cell phone should not be used. Please try
again later."
■ To cancel Public mode (Power OFF)
On the standby screen w25250 r
Public mode (Power OFF) is canceled.
■ To check Public mode (Power OFF) setting
On the standby screen w25259 r
You can check Public mode (Power OFF) setting.
● When Public mode (Power OFF) is set
The setting is valid until "*25250" is dialed to cancel Public mode (Power OFF). The setting is not canceled
only by turning on the FOMA terminal.
The Public mode (Power OFF) message is announced even when you are in an out-of-service area or where
the reception is very poor.
● A caller making a voice call hears a message that you cannot answer the call because you are in the place you have
to turn off the mobile phone, then the call ends.
● A caller making a videophone call sees the Public mode (Power OFF) video message on his or her display, then the
call ends.
● Handling of received calls when network services and Public mode (Power OFF) are set
If the FOMA terminal is set to Public mode (Power OFF) while network services are activated, voice calls and
videophone calls are handled as shown in the table below.
Service
Voice mail service
Connects to the Voice mail service center after
announcing the Public mode (Power OFF)
message.
・Transfers the call to the forwarding number after
Call forwarding
service
announcing the Public mode (Power OFF)
message.
・The Public mode (Power OFF) message is
announced or not depending on the setting of
the call forwarding service.
・Ends the call after announcing the call rejection
Nuisance call barring
service
message for the barred callers.
・Ends the call after announcing the Public mode
(Power OFF) message for other callers.
・Ends the call after announcing the caller ID
Caller ID request
service
request message for the callers who do not
provide the caller ID.
・Ends the call after announcing the Public mode
(Power OFF) message for the callers who
provide the caller ID.
*1 : If the ring time is set to 0 second, the Public mode (Power OFF) message is not announced and the "Voice mail service" or "Call
forwarding service" is applied. In addition, they are not recorded in the "Received calls" record and "Missed calls" desktop icon does
not appear.
*2 : The call ends without connecting to the Voice mail service center (as of August, 2006).
When a voice call is received
*1
*1
When a videophone call is received
Connects to the Voice mail service center without showing
the Public mode (Power OFF) video message.
Transfers the videophone call to the forwarding number
without showing the Public mode (Power OFF) video
message.
The connection is not established when the videophone for
the forwarding number is not compatible with 3G-324M.
・Ends the call after showing the video message that the
connection is not established for the barred callers.
・Ends the call after showing the Public mode (Power OFF)
video message for other callers.
・Ends the call after showing the caller ID request video
message for the callers who do not provide the caller ID.
・Ends the call after showing the Public mode (Power OFF)
video message for the callers who provide the caller ID.
*2
77

Advertisement

Table of Contents
loading

Table of Contents