NTT docomo FOMA N702iS Manual page 69

<Hands-free>
Switching to Hands-free Operation
Switching to hands-free operation during a call enables you to hear the other party's voice through a speaker.
In-call screen (P.54)
1
" " appears and you can hear other party's voice through a speaker during a hands-free call.
While your terminal is ringing because of an incoming voice call, you can switch to hands-free operation by pressing
o
( ).
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
ＦＵＮＣ
Voice call
■ To cancel the hands-free operation
Press o(
The hands-free operation ends, and "
videophone call.
● Notes on using the hands-free operation
It is recommended to keep a distance of about 30 cm from the FOMA terminal during a hands-free call. If the
distance is longer or shorter than 30 cm, the other party may find it difficult to hear you or your voice may
sound differently.
N
Other party's voice may be heard by those around you during a hands-free call. Move to an area where your call will not disturb other
people before switching to a hands-free call.
When a call is finished, the hands-free setting is canceled.
The hands-free operation turns on or off according to the "Hands-free switch" setting (P.94) when a videophone call is connected. The
default setting turns on the hands-free operation when a videophone is connected and you will hear the other party's voice through a
speaker.
<In-car Hands-free>
Making Hands-free Calls in the Car
You can operate (such as making or receiving voice calls) the FOMA terminal using hands-free compatible
devices by connecting the FOMA terminal to hands-free compatible devices such as the In-Car Hands-Free Kit
01 (optional) or a car navigation system.
For information on how to use the hands-free device, refer to the manual provided with the device. The FOMA
In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01 (optional).
N
The display and ring tones used for incoming calls and mail are as specified in the FOMA terminal settings.
If the hands-free device is set to emit the sound from the hands-free device, the ring tone will still sound through the hands-free device
even when the FOMA terminal is set to Manner mode or the ring volume is set to "Silent".
When the FOMA terminal is set to Public mode (Driving mode), operation for incoming calls and messages is as specified in the
"Public mode (Driving mode)" settings.
When the FOMA terminal is set to record caller messages, operation for incoming calls is as specified in the "Record message"
settings.
When you make a videophone call from a hands-free device using the phonebook or redial function, the connection speed is
determined by the hands-free device. If the connection speed is not set, "64K" is used.
If the hands-free device is set to emit the sound from the FOMA terminal, operation when the FOMA terminal is folded during a call is
as specified in "Fold setting". When the hands-free device is set to make sound, "Fold setting" is ignored and folding the FOMA
terminal makes no difference to the call status.
o(
)
１０ｓ
１7：２３
Ｃｈａｎｇｅ ＦＵＮＣ
Videophone call
) during a hands-free call
" disappears during a voice call and " " changes to " " during a
67