Table of Contents
Advertisement
Videophone in-call screen
Videophone in-call screen (P.85) p(FUNC) Select any item:
1
V-phone
settings......Sets the screen for videophone call.
Visual
This setting is only retained during the call.
Brightness......Five brightness levels (–2 to 0 to +2) are available.
Adjust the brightness using
White
For details on each setting item, refer to "White balance" setting (P.162).
This setting is also applied to the equivalent camera functions.
Color mode
This setting is only retained during the call.
Photo
For details on each setting item, refer to "Photo mode" (P.162).
This setting cannot be set for the front camera.
Chara-den
setup......You can set the followings when Chara-den is used. This setting cannot be set for the camera images.
Switch
Action
You can also view the action list by pressing w.
Change
Switch
Display
light......Sets lighting of display light.
All time ON
15 seconds
Substitute image
⇔
Rear camera
Front
This setting is only retained during the call.
Change main
disp.......Changes the main display.
The screen changes in the order of "Displaying the image from the other party's camera on your main screen." →
"Displaying the image from your own camera on your main screen."→ "Displaying only the image from the other party's
camera."→ "Displaying only the image from your own camera."
Voice phone
change......"Changing a Videophone Call to a Voice Call" → P.88
⇔
Send DTMF tone
Except for Chara-den, videophone calls are always in push signal transmission mode.
Own
number......Displays your phone number during a videophone call.
Petit
message......"Sending messages during videophone calls (sending of camera image)" → P.94
Decoration......"Using face decorations to increase the range of expressions in videophone calls"→ P.93
Off
decoration......Erases the currently displayed message or stamp.
Visual check
⇔
Visual check
Call time disp.
(default : ON)......Sets whether to display the call time during a call.
86
preference......Sets the image sent to and received from the other party.
Normal
(default)......Standard setting for both quality and movement.
Prefer img
qual......Sends more finely detailed video images. Best for motionless subjects.
......Sends video images with smooth movement. Best for fast-moving
Prefer motion spd
subjects.
c
balance......Sets image color tones.
set......Selects the image effect from "Normal/Sepia/Monochrome".
mode......Sets modes suited to the scene being shot.
Chara-den......Selects the character to be displayed.
list......Checks the available actions and the corresponding keys.
action......Changes the Action mode.
image......Displays your own custom image on the other party's display. → P.91
(default)......Turns the display light on all the time.
ON......Turns the display light on for 15 seconds only.
⇔
Camera
image......Switches between the camera image and the substitute image.
camera......Switches between the front and rear cameras.
DTMF tone
OFF......Sets/cancels push signal transmission mode during Chara-den.
off......"Checking your appearance during a videophone call"→ P.92
Advertisement
Chapters
Table of Contents
