Entering Text Using T9 Input - NTT docomo FOMA N702iS Manual

<Mode 2 (2-touch input)>
Entering Text Using 2-Touch Input
You can enter 1 character by pressing 2 dial keys.
For example, to enter " う", press 13 in
sequence as " う " is the third character of the " あ
column", "あいうえお"
● Refer to "Characters that can be entered using 2-
touch input" (P.364) for details on the character
assignment.
<Example: To enter " 秋のキャンプ ">
Text entry (edit) screen (P.344)
1
to Full-pitch input mode
When "Full-pitch input mode (
to switch the mode.
Enter the hiragana
2
11 22
あ き
55 22
の き
80 81
Lower case input や
80
03
ん
Upper case input
63 05
ふ （handakuten） ゜
Edit the entered characters
3
Edit the characters in the same as 5-touch input.
→ P.345
354
Set
)" is not set, press u
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
あきのきゃんふ゜
ＣＨＧ
ｃｈ Ｍｏｄｅ
５１２
Ｓｅｔ ＣＨＧ
<Mode 3 (T9 input)>

Entering Text Using T9 Input

You can enter a character with fewer key operations
(1 time for 1 character) and select the character you
want from the conversion candidates.
For example, when you want to enter " 春", press
6 for " は column", press 9 for " ら column",
then select " 春 " from the displayed conversion
candidates.
● To assist T9 input, you can use "Yomi edit" function to
correct the reading when the conversion candidates
do not have the character you want, and "Fixed
mode" function to enter correct reading when
entering text.
● Refer to "Characters that can be entered using T9
input" (P.365) for details on the character assignment.
● You can use T9 input only when the input mode is
"Kanji/hiragana (Full-pitch)", "Katakana (Full-pitch)",
"Katakana (Half-pitch)", "Alphabetic (Full-pitch)",
"Alphabetic (Half-pitch)". When the input mode is
"Numeric (Full-pitch)" or "Numeric (Half pitch)", the
text entry mode is automatically set to "5-touch input".
<Example: To enter " 春">
Text entry (edit) screen (P.344)
1
to Kanji/hiragana input mode
When "Kanji/hiragana input mode (
press u to switch the mode.
Enter characters
2
6 9
（は column）
The predicted candidates for the
combination of " は column" and " ら
column" are displayed.
■ If the entered texts has no recognized
candidates
Characters that cannot be recognized are
displayed in gray
of characters to be converted.
■ To change the conversion candidate display
mode (kanji/kana/alphabets)
r
c
3
The cursor appears in the operation
guidance area and you can select
the conversion candidate.
■ To return to entering characters
t
Set
)" is not set,
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
（ら column）
ひる
Ｓｅｌ. Ｋａｎａ ２３
昼 晴れ フル 春 減る
触れ 腹 掘る ふり 針 堀
緑 風呂 ほれ 減れ ほら
平 広 経ろ 平良 幌 ヒレ
Ｙｏｍｉ Ｓｅｌｅｃｔ
Use v to change the range
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
はる
ＣＬＲ Ｋａｎａ Ｅｘｐｅｃｔ ４／ ２３
昼 晴れ フル 春 減る
触れ 腹 掘る ふり 針 堀
緑 風呂 ほれ 減れ ほら
平 広 経ろ 平良 幌 ヒレ
Ｙｏｍｉ Ｓｅｌｅｃｔ
ＣＨＧ
ＣＨＧ