NTT docomo FOMA N702iS Manual page 195

N
You cannot save JPEG images larger than 1616 dots wide,
1212 dots high or GIF images larger than 640 dots wide × 480
dots high or 480 dots wide × 640 dots high.
You cannot save progressive JPEG images larger than 640
dots wide × 480 dots high or 480 dots wide × 640 dots high.
You cannot save images larger than 100K bytes.
Up to 36 half-pitch characters can be used in the file name of
the saved image. If no file name is specified, the text between
the last slash (/) and the period (.) in the URL from which the
file was downloaded is used as the file name. However, if
there is nothing between "/" and "." or in other cases, the file
name is saved as "imagexxx" (xxx are numbers).
If "Set image display" is set to "OFF", you cannot save the
image. The image can also not be saved if "
If you try to save an image during reception of a large image,
a confirmation message appears saying that you cannot
perform the operation while a large size file is downloaded.
A transparent GIF file that is not an animation GIF file and has
the extension "ifm" is saved as a frame or stamp in one of the
following sizes:
・ Frame that has an image size of CIF (352 × 288), CIF Vert.
(288 × 352), QVGA (320 × 240), Screen (240 × 345, 345 ×
240), Stand-by (240 × 320), QCIF (176 × 144), QCIF Vert.
(144 × 176), Sub-QCIF (128 × 96), Sub-QCIF Vert. (96 ×
128)
・ Stamp that is not a frame image and has a size of 240 dots
wide × 240 dots high or smaller
■ Important
You can transfer and save the stored images to your PC by
using FOMA USB Cable (optional). (You cannot transfer
them to PC if you are prohibited to attach them to mails or to
output them from your FOMA terminal.)→ P.297
Saved data may be lost due to a reason such as a damage
or repair of your FOMA terminal. Please note that NTT
DoCoMo takes no responsibility for such loss.
■ Progressive JPEG-format images
The progressive JPEG format is an image format
for images to be used on sites or websites.
Images in this format are initially displayed
coarsely (at low resolution) and then displayed
clearly as more data arrives.
<i-melody>
Downloading i-Melodies from Sites
You can set your favorite song, the latest hit song
downloaded from a site or a stored melody attached
to an i-mode mail as a ring tone on your FOMA
terminal.
● When you try to download a charged melody, a
confirmation message appears. → P.192
● You can store up to 200 melodies. (The number of
melodies you can actually store may be reduced
depending on the file size of stored melodies.)
<Example: Storing a melody downloaded from a
site>
" is displayed.
Sites screen (P.183)
1
melody
"Save"
2
■ To play a melody
■ To display melody information
"YES"
3
■ Not to set the melody as a ring tone, etc.
N
You may not be able to download melodies depending on
sites or the melody size.
Downloaded melodies may be subject to restrictions such that
only a pre-designated part of the melody can be played. While
a melody of this type will be played in full when played back
on the FOMA terminal, when it is set as a ring tone, only the
designated section will be played.
The URL in the data acquisition screen is not stored in "Last
URL". In this case, the URL for the page displayed just prior to
the data acquisition screen is stored as the last URL.
Some downloaded melodies may not be played correctly.
When the file name of saved melody consists of only half-
pitch alphanumeric characters, the melody is saved using up
to 36 half-pitch characters of that file name. If no file name is
specified, the text between the last slash (/) and the period (.)
in the URL from which the file was downloaded is used as the
file name. However, if there is nothing between the "/" and the
" . " or in other cases, the melody is saved as "melodyXXX"
(XXX are numbers).
Downloaded melodies are played at the ring volume specified
for "Phone" in "Ring volume".
If you try to save melody during reception of a large image, a
confirmation message appears saying that you cannot
perform the operation while a large size file is downloaded.
"YES" Select a folder
"Play"
"Property"
Select an item
"NO"
Continued on next page
Select a
Ｄａｔａ ａｃｑｕｉｓｉｔｉｏｎ
ＣＭ ｓｏｎｇ
Ｐｌａｙ
Ｓａｖｅ
Ｐｒｏｐｅｒｔｙ
Ｒｅｔｕｒｎ
Ｓｅｌｅｃｔ ＦＵＮＣ
193