NTT docomo FOMA N702iS Manual page 397

Check the selected date and time "YES"
2
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ
Ｒｅｓｅｒｖｅ ｆｏｒ
１１／１０（Ｆｒｉ） ７：３０？
ＹＥＳ
ＮＯ
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ
Ｒｅｓｅｒｖｅｄ ｔｉｍｅ ｒｅａｃｈｅｄ
Ｓｔａｒｔ ｕｐｄａｔｅ
ＯＫ
Ｓｅｌｅｃｔ
N
The reservation time for the software update will be based on the server's time.
When the reservation time for the software update is the same as the alarm notification time, priority is assigned to the software
update.
Note that software update may not start up at the scheduled time if another function is being used.
If the scheduled time has passed during a call, data communication, receiving a call or a mail, etc., the software update is launched
after you finish talking or receiving mail.
If you perform "Initialize" (P.323) after the reservation procedure is complete, the software update does not start at the scheduled time.
Reschedule the time for update.
● If you select "Others"
You can select the desired date and period of time after communicating with the server if you select "Others" at
step 1 in P.394.
Select a desired date
1
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ
Ｓｅｌｅｃｔ ｐｒｅｆｅｒｒｅｄ ｄａｙ
［２００６／１１／１２（Ｓｕｎ）］
S M T W T F S
１ １ ２ ３ ４
５ ６ ７ ８ ９ １ ０ １ １
１ ２ １ ３ １ ４ １ ５ １ ６ １ ７ １ ８
１ ９ ２ ０ ２ １ ２ ２ ２ ３ ２ ４ ２ ５
２ ６ ２ ７ ２ ８ ２ ９ ３ ０ ２ ８ ２ ９
３ ０
Ａｖａｉｌａｂｌｅ
Ｎｏｔｅｓ Ｓｅｌｅｃｔ
Select an hour
2
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ １／３
Ｓｅｌｅｃｔ ｙｏｕｒ ｐｒｅｆｅｒｒｅｄ
ｔｉｍｅ−ｓｌｏｔ
０：００ − ０：５９ ○
１：００ − １：５９ △
２：００ − ２：５９ ○
３：００ − ３：５９ ○
４：００ − ４：５９ △
５：００ − ５：５９ △
６：００ − ６：５９ ×
７：００ − ７：５９ △
Ｎｏｔｅｓ Ｓｅｌｅｃｔ
Confirm the software update date and time
3
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ
Ｒｅｓｅｒｖｅ ｆｏｒ
１１／１２（Ｓｕｎ） ０：２３？
ＹＥＳ
ＮＯ
The software update is reserved.
Ｓｏｆｔｗａｒｅ Ｕｐｄａｔｅ
■ To change the date and/or time
Ｒｅｓｅｒｖｅ ｆｏｒ
１１／１０（Ｆｒｉ） ７：３０
ＯＫ
The screen on the left appears at the reservation time and the FOMA terminal starts the
software update automatically. Charge the battery fully, put the FOMA terminal at a location with
strong radio wave reception and display the standby screen before the reservation time. The
rest of operation is same as "Updating software immediately <Immediate update>" (P.393).
In the date selection display, you will see the update availability represented as shown below:
○ : Available
△ : Almost full
None: Full
In the time selection display, you will see the update availability represented as shown below:
○ : Available
△ : Almost full
× : Full
Select the period of time to display the candidates for the reservation time by communicating
with the server again.
If you check the selected date and time and select "YES", you will communicate with the server
again.
The software update is reserved.
"NO"
395