Setting Remote Observation; Remote Observation - NTT docomo FOMA N702iS Manual

<Remote observation>

Setting Remote Observation

Default setting Other ID: Not recorded Ringing time: 5 sec. Set: OFF
Remote observation is only available between FOMA terminals or between a FOMA terminal and a phone
equipped with a 3G-324M-compatible videophone function. Your FOMA terminal can be used as either the
dialing or receiving phone for remote observation.
● Remote observation can only be carried out when phone number of the observing (dialing) phone is stored
beforehand in the phone receiving the remote observations and "Remote observation" is set to "ON".
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID) and the delay until remote observation begins (Ringing
time) on the phone performing the remote observation (receiving phone).
● Up to 5 IDs can be stored.
Video-phone settings screen (P.91) "Remote
1
observation" Enter the security code "Other ID"
The "Other ID screen" appears.
"<Not recorded>" Enter the phone number of the other
2
phone
■ To change a previously stored ID
Select an ID you want to change
Press t to return to the remote observation screen
3
"Ringing time" Enter the ring time (003 to 120 seconds in 3 digits)
4
Entering a 3-digit number sets the ringing time.
Press d (Set) to set the displayed time.
"Set" "ON"
5
When you set remote observation, "
Position the FOMA terminal
6
In remote observation, the image from the front camera
is sent to the dialing phone.
Put the receiving FOMA terminal in the observation
position, ensuring that it is switched on and unfolded.
If the FOMA terminal is left folded, only the voice is sent
and the camera image is not sent. The substitute image
is sent with "Camera Off" written on the image.
N
When positioning the FOMA terminal, set "Video-phone" in "Vibrator" to "OFF" to prevent the FOMA terminal from moving when
receiving calls. → P.116
The ringing time set for Remote observation cannot be set to the same ringing time for "Record message" or "Automatic answer".
If the ringing time set for "Call forwarding" on the receiver side is shorter than the ringing time set for remote observation, "Call
forwarding" takes priority. To give priority to remote observation, set a shorter ringing time than the "Call forwarding" setting.
96
" appears in the standby screen.
■ To turn remote observation off
"OFF"
Front camera
Ｏｔｈｅｒ ＩＤ
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Ｓｅｌｅｃｔ ＦＵＮＣ
Other ID
Function menu P.97
Adjust the angle