NTT docomo FOMA N702iS Manual page 312

[Table 1] Alarm notification actions
Status
Standby screen displayed
FOMA terminal turned off
*1
Call in progress
*1
Receiving or Dialing a call
*1
i-mode or sending/receiving mail
During infrared communication
or data transfer in OBEX
When an earphone/ microphone
is connected
When "PIN1 code entry set" is
set to "ON" and the PIN1 code
entry screen is displayed after
the FOMA terminal is turned on
While All lock/PIM lock is set
*1 ： Operations when "Alarm preferred" is set. When "Operation preferred" is set, the desktop icon "
the standby screen. → P.311
[Table 2] How to stop the alarm tone
Alarm stop setting Snooze setting
*1
Stop by shaking OFF
ON
Stop by operating OFF
ON
*1 ： The sensor resets the detection of continuous move when the move is not detected for more than 1 second.
310
Alarm clock
If "Snooze OFF" is selected, the alarm tone
sounds repeatedly for the specified time (01 to
10 minutes). If "Snooze ON" is selected, the
alarm tone for 1 minute repeats up to 6 times at
about 5-minute intervals. Animations are also
displayed on the screen.
If "ON" is selected for the "Auto power ON"
function, the FOMA terminal automatically turns
on and notifies you of the alarm. If the setting is
set to "OFF", the power does not turn on and no
alarm notification is provided. The "
alarm) desktop icon is not displayed on the
desktop even after the FOMA terminal is turned on.
The clock alarm tone ("pipipi...") sounds through the FOMA terminal's earpiece 3 times. Animations
also appear on the screen.
The alarm may be notified or not depending on the situation. When alarm is notified, the alarm tone
sounds and the animation appears on the screen.
Alarm notification is the same as for the "Standby screen displayed".
No alarm notification is provided when the specified time has elapsed. When data communication
ends, the " " (Missed alarm) desktop icon appears on the standby screen.→P.311
The alarm tone sounds from the earphones or speaker according to the "Earphone" setting. Also, an
animation appears on the screen.
Alarm notification is the same as for the "Stand-
by screen displayed".
notification screen clears, the PIN1 code entry
*1
screen reappears.
Regardless of the "Alarm setting", no alarm
notification is provided when the specified time
has elapsed. After the All/PIM lock is released,
the " " (Missed alarm) desktop icon appears
on the standby screen (P.311). If you turn the
FOMA terminal off while the All/PIM lock is set
and do not turn it back on before the specified
time has elapsed, the FOMA terminal is not
turned on even when the specified time is
reached and no " " (Missed alarm) desktop
icon appears on the standby screen after the All/
PIM lock is released.
Shaking the FOMA terminal for about 4 seconds (or pressing y) emits the release tone
"pipip" and stops the alarm tone and the display.
Shaking the FOMA terminal for about 3 seconds (or pressing y) stops the alarm tone and the
display, then the FOMA terminal enters Snooze mode.
Shaking the FOMA terminal for about 2 seconds (or pressing y) during the Snooze mode
emits the release tone "pipip" and the Snooze mode is canceled.
Pressing any key stops the alarm tone and the display. Pressing any key again emits the release
tone "pipip" and the display disappears.
Pressing any key stops the alarm tone and the display and the FOMA terminal enters Snooze
mode. Pressing y during the Snooze mode emits the release tone "pipip" and the Snooze
mode is canceled.
Function
The alarm tone sounds repeatedly for about 5
minutes and animations also appear on the
screen.
No alarm notification is provided when the
specified time has elapsed. The setting remains
effective.
" (Missed
Alarm notification is provided after the correct
When the alarm PIN1 code is entered.
Regardless of the "Alarm setting", no alarm
notification is provided when the specified time
has elapsed. After the All/PIM lock is released,
the "
on the standby screen.→P.311
How to stop the alarm tone
Schedule, ToDo
" (Missed alarm) desktop icon appears
" (Missed alarm) is displayed on