Before Using The Camera - NTT docomo FOMA N702iS Manual

Before Using the Camera

You can use the FOMA terminal's built-in camera to
shoot photos (still images) and movies.
● You cannot activate the camera function or shoot
images when the FOMA terminal is folded.
Using the camera
● To set to camera mode
There are three ways as follows:
① Select the desktop icon (
screen
② Press s(
) (for 1 second or longer) on the
standby screen
③ Select "Camera" from
select the camera mode for shooting
● When there is no key operation for more than about 3
minutes, the camera mode ends automatically.
N
To paste the desktop icon again after deleting, select
"Camera" in step 3 above and press p (FUNC) to select
"Add desktop icon".
● To switch between the rear camera and
front camera
Press p(FUNC) in the shooting screen, then select
"Front camera" or "Rear camera" from the function
menu.
Rear camera
■ Rear camera
This camera is useful for taking pictures of other people,
animals or scenery. What you see is what you get on the
screen (Normal display: photographed as it is displayed
on the screen). The rear camera can be used to take
pictures of nearby subjects by utilizing the lens selector
switch and the close-up function → P.158, 162
■ Front camera
Use this camera to take a picture of yourself. The image
is displayed as if you are looking in the mirror. (Mirror
display: The shot image is reversed from the displayed
image.)
● Lens selector switch
● To take a close-up image, move the lens selector
switch to (macro lens). When you move the lens
selector switch to , the camera is focused on an
object approx. 7 to 9 cm away from the rear camera.
● To use Access reader or Bar code reader, move the
lens selector switch to
● When you move the lens selector switch, move the
switch to the ● (standard lens) position or the
(macro lens) position. Do not leave the switch in the
middle of these positions.
158
) on the standby
of the main menu and
Front camera
(macro lens).
Lens selector switch
Image size and maximum number of
images
● The following shows the sizes of images that the
FOMA N702iS can shoot. Select the size suiting to
the purpose:
*The image sizes framed above are not the actual sizes.
① SXGA (1,280 dots W × 960 dots H)
② VGA (640 dots W× 480 dots H)
③ CIF (352 dots W × 288 dots H)
④ Screen (240 dots W × 345 dots H)
The same size as the FOMA terminal display.
⑤ Stand-by (240 dots W × 320 dots H)
The same size as the standby screen.
⑥ Mail (L)/Large (176 dots W × 144 dots H)
⑦ Mail (S)/Small (128 dots W × 96 dots H)
W: Wide H: High
● Table 1 (P.159) shows the image sizes and the
approximate numbers of images that can be stored
(A: Available, U: Unavailable).
● Table 2 (P.159) shows the movie sizes and the
approximate numbers of movies that can be stored.
● The default length of movie shooting is about 45
seconds. However, the shooting time per movie
varies by the factors such as the types of objects.
● The maximum number of movies that can be stored
varies by the movie contents, shooting time, etc.
Using the standard lens
Slide to the position
Using the macro lens
Slide to the position
①
②
③
④
⑤
⑥
⑦