NTT docomo FOMA N702iS Manual page 473

AT command
n m
AT+IFC= , Selects the flow control
method.
[&F] [&W]
n
AT+WS46= Displays the wireless
communication network of
[&F] [&W] the FOMA terminal.
AT¥S Displays the contents of
commands and S registers
currently set.
n
AT¥V Selects the response code
specification for connecting
[&F] [&W] the line.
ATA Handles the incoming call
process according to the
mode received by the
FOMA terminal.
ATD Handles the automatic
calling process for the
FOMA terminal according
to the specified parameters
and dial parameters.
n
ATE Selects whether the echo
back is present for DTE in
the command mode.
[&F] [&W]
n
ATH Performs on-hook
operation for the FOMA
terminal.
Outline
n ： DCE by DTE
ｍ
： DTE by DCE
0 ： No flow control
1 ： XON/XOFF flow control.
2 ： RS/CS (RTS/CTS) flow control.
initial value:
AT+IFC?: Displays the current setting.
n
= 22： Only W-CDMA (Wideband CDMA)
−
n
= 0 : Not use extended result code (initial
n
= 1 : Use extended result code.
−
ATD＊99＊＊＊<cid># : Packet communication
<cid>
AT+CBST=116,1,0
ATD<phone number> : 64K communication
AT+CBST=131,1,0
ATD<phone number> : AV32K communication
AT+CBST=134,1,0
ATD<phone number> : AV64K
communication
n
= 0 : Echo back absent.
n
= 1 : Echo back present (initial value).
n
= 0 : Disconnect the line (can be
52
Parameter/description
n m
, =2, 2
can be specified (initial value).
value).
1 to 10: displays APN with
+CGDCONT setting.
omitted).
Command execution example
AT+IFC=2,2
OK
AT+IFC?
+IFC：2,2
OK
AT+IFC=?
+IFC： （0,1,2）,(0,1,2)
OK
AT+WS46=22
OK
AT¥S
E1 Q0 V1 X4 &C1
&D2 &S0 &E1 ¥V0
S000=000
S002=043
S003=013
S004=010
S005=008
S006=005
S007=060
S008=003
S010=001
S030=000
S103=001
S104=001
OK
AT¥V0
OK
RING
ATA
CONNECT
<Packet communication>
ATD ＊ 99＊＊＊ 1#
CONNECT
<64K communication>
AT+CBST=116,1,0
OK
ATD090xxxxxxxx
CONNECT
<AV32K communication>
AT+CBST=131,1,0
OK
ATD090xxxxxxxx
CONNECT
<AV64K communication>
AT+CBST=134,1,0
OK
ATD090xxxxxxxx
CONNECT
ATE1
OK
(During packet
communication)
+++
OK
ATH
NO CARRIER