NTT docomo FOMA D701I Manual

Table of Contents

Quick Links

Download this manual

Quick Search/

Contents/Cautions

Before Using D701i

Manual

for

Making/

Receiving Calls

Video-phone Calls

'05.9

Phonebook

Sounds/Displays/Lights

Safety Settings

Camera

i-mode/i-motion

Mail

ppli

i-channel

Data Management

Other Convenient

Functions

Network Services

Data Communication

Character Entry

Appendix/Data Interchange/

Troubleshooting

INDEX/

Quick Reference

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA D701I and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo FOMA D701I

Page 1 Quick Search/ Contents/Cautions Before Using D701i Manual Making/ Receiving Calls Video-phone Calls ’05.9 Phonebook Sounds/Displays/Lights Safety Settings Camera i-mode/i-motion Mail ppli α i-channel Data Management Other Convenient Functions Network Services Data Communication Character Entry Appendix/Data Interchange/ Troubleshooting INDEX/ Quick Reference...
Page 2 To owners of FOMA D701i, NOTICE OF CORRECTION Inaccurate information has been found in the manual for FOMA D701i. We apologize for any inconvenience this may have caused and ask you to refer to the following revised information when using your phone.
Page 3: Before Using Your Foma Terminal
If you are unclear as to any point indicated in any of these manuals, contact the DoCoMo Information Center that is listed on the back of this manual. Your FOMA D701i is a valuable asset. Handle it with care and it will be your trusted partner for years to come.
Page 4: How To Use And Refer To This Manual
How to use and refer to this manual How to refer to this manual You can look for functions or operation procedures that you want to know using various searching ways. Refer to INDEX P504 Search for a function name or service name. Use Quick Search Search for frequently-used or useful functions using easy-to-understand words.
Page 5 How to use and refer to this manual Shown below is an example when you search for the page where “Vibrator Setting” is described. Searching on INDEX Use INDEX if you have already known a function or service name. Vibrator Setting ......i- ppli........
Page 6 Title & Function name: Using vibrator to signal incoming calls and alarms Vibrator Setting Function names are The reception of voice or video-phone call, mail, Message R/F, etc. or the schedule alarm notice listed on INDEX. is indicated by vibration. Functional overview ･...
Page 7: Quick Search
Quick Search Use this Quick Search to look for the frequently-used or convenient functions directly. Useful • Notify/not notify your phone number....50 Caller ID Notification functions for • Talk facing your phone ........81 Speakerphone function phone calls • Adjust volume of caller’s voice ......
Page 8 Advanced functions for • Send your original Deco-mail ......223 Deco-mail mail • Send images with mail........229 Attachment • Sort and save mail automatically....... 258 Sort Criteria Advanced • Change the size of image to shoot ....165 Image size functions for •...
Page 9: Table Of Contents
Using a FOMA terminal for the first time ... Inside front cover Contents How to use and refer to this manual ........1 Quick Search............... 4 Features of FOMA D701i ............ 8 Making full use of D701i ............ 10 SAFETY PRECAUTIONS (Always follow these directions)..12 Handling instructions ............19 About intellectual property rights ........
Page 10 C o n t e n t s Mail Composing and sending i-mode Mail Deco-mail Attachment Saving i-mode Mail Receiving i-mode Mail Check i-mode Message i-motion Mail Display/Save Image Play/Save Melody Mail Setting Chat Mail Composing and sending SMS etc. i-αppli Download Starting i- ppli i-...
Page 11: Features Of Foma D701I
(Movie ringtone). ☛P210 i-mode Mail to send them. ☛P229 Main functions of FOMA D701i ppli/i- ppli DX α α...
Page 12 Wide array of network services ☛P398 ☛P400 ● Voice Mail Service (charged) ● Call Waiting Service (charged) ☛P401 ☛P405 ● Call Forwarding Service (free of charge) ● Dual Network Service (charged) ● SMS (Short Message Service) (free of charge) *1 Separate application is required. ☛P273 *2 Separate application is not required.
Page 13: Making Full Use Of D701I
Making full use of D701i A variety of functions of D701i visual communications are explained here. i-channel You can receive a variety of information on a regular basis without additional operations. Press the i-channel compatible key (c) to display the list of channels so that you can get more richly detailed information.
Page 14 Plentiful stand-by display A variety of selection options are available for a clock design on the stand-by display. ☛P134 By displaying information on unread mail, missed call, calendar or schedule on the stand-by display, its details screens can be opened with simple operation (Custom stand-by display). ☛P123 Example of the clock display Custom stand-by display Press o to select an area...
Page 15: Safety Precautions (Always Follow These Directions)
SAFETY PRECAUTIONS (Always follow these directions) ● Read the following SAFETY PRECAUTIONS to ensure that the phone is used correctly. Also, store this manual in a convenient location for future reference. ● It is essential that these precautions be observed to prevent injury to the user and third parties as well as damage to property.
Page 16: Handling The Foma Terminal, Battery Pack, Adapter (And Charger) And Uim (General Information)
Handling the FOMA terminal, battery pack, adapter (and charger) and UIM (general information) DANGER Use only DoCoMo-certified battery packs, adapters (and chargers) with the FOMA terminal. Use of non-specified items could cause the FOMA terminal, battery pack or other devices to leak, overheat, rupture, catch fire or malfunction.
Page 17: Handling The Foma Terminal
CAUTION When a child uses the FOMA Do not place the components terminal, first be sure an on an unstable or tilted surface. experienced adult teaches Doing so could cause the equipment to slide off, possibly causing personal proper usage methods and injury or damaging the equipment.
Page 18: Handling The Battery Pack
When you talk under hands-free Do not aim the compact light settings (with the speakerphone and call indicator (emotional function), be sure to keep a lighting) toward oncoming distance between FOMA vehicles or other drivers terminal and your ear. The other driver could be temporarily blinded or momentarily startled, Doing so could cause the hearing loss.
Page 19: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder/In-Car Holder)
DANGER If electrolyte from the battery Do not throw the battery pack pack gets in your eyes, do not into a fire. rub; instead, rinse immediately Doing so could cause the battery pack to leak, overheat, rupture or catch fire. with copious amounts of clean water and seek medical attention.
Page 20 WARNING Use care not to short circuit the Do not touch the adapter (and charger) cord or wall outlet with recharging terminal when the wet hands. adapter (and charger) is connected Doing so could cause electric shock. to a wall outlet or cigarette lighter socket.
Page 21: Handling The Uim (Foma Card)
CAUTION Disconnect the power plug before Do not yank on the adapter (and beginning any maintenance. charger) cord or power cord when Failure to do so could cause electric disconnecting the adapter (and shock. charger) from the wall outlet. Doing so could damage the cord, Do not place heavy objects on resulting in electric shock or fire.
Page 22: Handling Instructions
NTT DoCoMo cannot be held responsible in any way for the loss of stored data. ●Do not put the FOMA terminal in your back pocket and sit on it. Avoid putting the phone in the bottom of a bag, etc.
Page 23 ●It is recommended that users maintain data stored on the UIM in some other form. If the data should be erased, NTT DoCoMo assumes no responsibility for the loss of any data. ●The UIMs that are no longer used should be returned to a DoCoMo Shop for environmental protection.
Page 24: About Intellectual Property Rights
α “i-channel”, “Dual Network”, “FirstPass”, “sigmarion”, “Security Scan”, “musea”, “visualnet” and the FOMA, i-mode and i-channel logos are trademarks or registered trademarks of NTT DoCoMo. ･ “ キャッチホン (Call Waiting)” is a registered trademark of Nippon Telegraph and Telephone Corporation.
Page 25 ･ McAfee and VirusScan are registered trademarks or trademarks of McAfee, Inc. and/or its affiliates in the US and/or other countries. All other registered and unregistered trademarks herein are the sole property of their respective owners. ©2005 Networks Associates Technology, Inc. All Rights Reserved. ･...
Page 26: Basic Package And Optional Accessories
Basic package and optional accessories Basic package FOMA D701i Instruction manual CD-ROM for FOMA (including the written (this book) D701i warranty and the rear cover D05) Quick Reference Manual is appended on P508. Optional accessories FOMA AC adapter 01 Desktop holder D05...
Page 27 MEMO...
Page 28 Before Using D701i Names and functions of parts ............... 26 Reading the display ..................29 Reading the sub-display ................31 Selecting the menu..................33 Number of saved, registered and protected items in FOMA terminal ..39 Using the UIM (FOMA card) ................39 Attaching/removing the battery pack ............
Page 29: Names And Functions Of Parts
Names and functions of parts Size (mm)：103 (H) x 49 (W) x 21 (D) (when closed) Weight (g) ：Approx. 104 (with battery pack) c i-channel/Clear key In-camera ☛P89, P156 Used to shoot yourself or send your image during Use this key to delete characters, return to the a video-phone call.
Page 30 u Data Box/Movie Camera/ ↑ key Charge indicator Use this key to display Data Box menu, activate Lights in red during charging. Infrared data port ☛P345 Movie Camera, move the cursor upward, adjust volume, etc. Exchange data with the infrared communication. d i-mode/i- ppli/ ↓...
Page 31 Functions available with the side keys ○ : Available × : Not available Function Open Closed Operation FOMA Terminal State Press ij. Sound Set the earpiece Talking or recording a talking voice memo ○ ○ volume Press ij. Playing the stand-by i-motion * Set the volume , playing or editing video/i-motion, or playing a recorded...
Page 32: Reading The Display
Reading the display The description of icons displayed at the top or the bottom of the display are shown below: ･ When i-channel service is used, received information about i-channel is displayed in tickers on the stand-by display by setting Stand-by Telop Setting to Display. ☛P302 Unread i-mode Mail or SMS storage space is full and SMS storage space is Date,day of...
Page 33 Alarm Clock is set ☛ P365 Schedule alarm is set ☛P369 Effective Easy Selector Plus keys in Focus Mode ☛P38 Alarm Clock and schedule alarm are set miniSD memory card inserted ☛P331 simultaneously Software Update reserved ☛ Reading UIM ☛P47 P487 PIM Lock is set ☛...
Page 34: Reading The Sub-Display
(dark blue/gray) : Alarm Clock ringing : Software Update notified : In the miniSD mode : Own Number : Update Definition activated/ (communication is possible)/ (dark blue/gray) version display (USB cable unconnected/no : Setting/holding each : Setting each network service miniSD memory card function : Video-phone call through...
Page 35 : Self Mode is set : Alarm Clock is set : Data transfer in progress : Schedule alarm is set : Alarm Clock and schedule alarm are set : Unreceived i-mode Mail or Message R/ : Answer Machine is set F in the Center, i-mode Mail or : Recorded message storage space is full Message R/F storage space is full in...
Page 36: Selecting The Menu
INFORMATION ● The content of the sub-display disappears when you open FOMA terminal or when you do not press any key for a specified period of time. ● Set Hide callers’ info in Sub-display Info Setting not to display the phone number, name or mail address of the caller on the sub-display when receiving a call or mail.
Page 37 Press a. The simple menu is displayed. ■ Switching to the normal menu a Press m on the stand-by display, and press a. To switch the custom menu, press mp on the stand-by display. ･ When the simple menu is set ･...
Page 38 Selecting menu items with the dial keys (Shortcut operations) Each menu item has a number (item number) and can be selected by pressing the corresponding key. The item position corresponds to each key as follows: ･ In this manual, the operation procedure is mainly MENU explained in shortcut operations of the normal menu.
Page 39 Selecting menu items (List view) Press % to place the cursor at a menu item and press o. ･ You can select an item by pressing the dial key for Menu item at the cursor position the item number. You can also select a menu item by pressing % to ･...
Page 40 Selecting functions from the submenu In some functions, MENU is displayed at the upper left of the guide row. You can select submenu items and perform various operations. Example Selecting Redial submenu Press m in the redial list. Item at the cursor position Lower-level menu exists.
Page 41 Selecting an item from the check box Press % to place the cursor at a check box and press o. The check box changes from , and is selected. ･ Select the selected item ( ) to cancel the selection ( Depending on the function, select/cancel all items by pressing m.
Page 42: Number Of Saved, Registered And Protected Items In Foma Terminal
Number of saved, registered and protected items in FOMA terminal No. of saved/ No. of protected Type registered items items Mail Received mail* Up to 1,000 Up to 500 Sent mail* Up to 200 Up to 100 Unsent mail* Up to 200 Up to 100 Template* Up to 100...
Page 43 Inserting the UIM aSlide the locked section in the direction of the arrow. bInsert the UIM into the slot in the direction shown in the figure with the IC Locked side of the card facing down. section Cut corner Cut corner cPush in the UIM fully until it is clamped after the locked section is returned to its original position.
Page 44 UIM operation restriction function FOMA terminal is provided with the UIM operation restriction function for protecting your data and files. ･ When data or files downloaded from sites or data attached to mail are saved in FOMA terminal with the UIM inserted, the UIM operation restriction is automatically set to these data or files. ･...
Page 45: Attaching/Removing The Battery Pack
FOMA terminal uses a lithium ion battery containing valuable materials that should be recycled. To protect the environment, return used batteries to an NTT DoCoMo service counter, NTT DoCoMo agent or recycling center. ● Please take the following precautions when recycling batteries: ･...
Page 46: Charging The Battery
Charging the battery When the battery level is low, charge the battery. The battery level icon shows how much charge remains in the battery. ☛P46 ･ Charging time and operation time on full charge (estimates) Charging time Continuous call time Continuous stand-by time During a voice call : Approx.
Page 47 You can set the charge alert not to sound. ☛P118 ･･ Do not charge the battery for an extended period (longer than a full day) with FOMA terminal turned on. FOMA terminal uses power so the adapter continues charging until FOMA terminal is unplugged from the adapter.
Page 48 ■ Charging the battery in the desktop holder aUnfold the power plug from the AC 100 V AC adapter and plug it into a 100V AC outlet outlet. Power plug bInsert the AC adapter connector in the desktop holder until it clicks. cInsert FOMA terminal vertically into the desktop holder and then tilt back.
Page 49: Checking The Remaining Battery Level
Checking the remaining battery level Battery Level The display indicates the remaining battery level in 3 levels. ･ The remaining battery level display should be used as a rough indication. (Remaining battery level 3): Ample charge (Remaining battery level 2): Low charge (Remaining battery level 1): Recharging recommended The icon can be changed by Battery Icon setting.
Page 50: Turning The Power On/Off
Setting the low battery alert not to sound Low Battery Alert ･ The low battery alert does not sound when Silent Mode or Driving Mode is on. (The low battery alert sounds if the Low battery alert for Customize Silent Mode is set to ON when the personalized silent mode is on.) Default ON Press m815 on the stand-by display.
Page 51: Switching To English Mode
INFORMATION ● If you make a call or use i-mode communication when is displayed in locations outside the service area or where radio waves are hard to reach, move to another locations where the out of service area indication is not displayed.
Page 52 Select each item to set. ･ When you set Auto Time Set to ON, specify the offset time. Date and time adjustment is not available. Auto Time Set ： Turn the automatic time correction on/off. ･ To enter the date and time manually, set Auto Time Set to OFF. ：Specify the amount of time advance (+) or delay (-) so that your terminal's clock Offset advances from/delays to the time obtained at certain hours and minutes.
Page 53: Notifying Your Phone Number To The Other Party
Notifying your phone number to the other party Caller ID Notification Set FOMA terminal to send your phone number (caller ID) to be displayed on the other party’s phone every time you make a call. ･ Caller ID is your important information. Carefully consider whether to send your caller ID. ･...
Page 54 Making/Receiving Calls Making calls Making calls ....................52 Switching from a voice call to a video-phone call........55 Calling back previously called numbers .......... Redial 56 Setting whether to send your phone number for each call .. 186/184 Call 57 Making calls by setting the conditions ......
Page 55 Making calls Making calls The procedures for making voice calls and the common operations for voice calls and video- phone calls are explained here. ･ You cannot make calls even if you press dial keys when Keypad Dial Lock is on. ･...
Page 56 Putting calls on hold while talking On-hold Putting the call on hold while talking allows you to talk without the caller hearing your voice. ･ The callers are charged for the time spent on hold. Press o during a call. The call is put on hold and a guidance is played.
Page 57 Operation during voice calls ･ The following operations can be performed from the submenu: Submenu item Description Page a Switch to V-phone Switches from a voice call to a video-phone call. b Received calls Displays received calls. c Redial Displays redials. d Set time Sets the date and time.
Page 58 Hold down # for over a second. ･ Timed pauses can be entered in succession. ･ Each timed pause is followed by a second interval. ･ You cannot make a call if a timed pause is entered at the beginning of the phone number. INFORMATION ●...
Page 59 Menu 45 Calling back previously called numbers Redial This function records the number you dialed as call history (Redial). When the phone of the other party is busy, etc., you can redial by simple operation. ･ The redial list can contain up to 30 entries. When the number exceeds 30, the oldest one is deleted. ･...
Page 60 INFORMATION ● When Privacy Mode is on (Authorized access set for Phonebook & Logs), entry of the terminal security code is required. ● When Keypad Dial Lock or PIM Lock is set, the numbers recorded in the redial data up to that point are deleted.
Page 61 Making calls by setting the conditions Customized Call This function allows you to select a call type, show/hide your caller ID, use multi-number and append a prefix for each voice/video-phone call. Enter a phone number on the stand-by display and press m3. ･...
Page 62 ･ No subscription charges or monthly fee is required. ・You were subscribed to “WORLD CALL” as one of standard services at the time of subscription to the FOMA service (unless you request not to subscribe to it). ･ Change the international call dial procedure MY LINE service is not applicable to mobile telephone communications, including WORLD CALL service.
Page 63 Press p. ■ Selecting a prefix when making an international call a Enter a country code and then phone number on the stand-by display. b Press m3 and select Prefix field. c Select a prefix number to be used. d Press m and select Yes. Making a call by specifying a sub-address Sub Address Specify a sub-address to call a specific phone or communication device.
Page 64 Default High alarm Press m872 on the stand-by display. Press 1 to 3. Suppressing ambient noises to improve the call quality Noise Reduction By suppressing ambient noises during a call, the other party can hear your voice clearly and you can also hear the other party’s voice clearly.
Page 65 Receiving calls Receiving calls The procedures for receiving voice calls and the common operations for voice calls and video- phone calls are explained here. For a voice call, calls can also be answered by pressing 0 to 9, (, and # other than ･...
Page 66 ■ If the other party’s caller ID is not notified Displays a reason why no caller ID is sent. Reason for no Description caller ID User unset The caller selected not to send the caller ID. Payphone The call was made from a payphone, etc. Not support The call was made from a party who cannot send caller ID, such as a call from overseas or from a general subscriber...
Page 67 INFORMATION ● For calls received from callers not registered in the phonebook, you can reject calls, or set the ring tone or vibrator ringer action not to start immediately. ☛P152, P151 ● Call Rejection can be set for some parties registered in the phonebook. ☛P149 ●...
Page 68 Enabling use of dial keys to answer a call Any Key Answer Allows you to answer a call by pressing 0 to 9, ( or # other than n. ･ This function is available only for voice calls. However, it is unavailable when receiving a call while talking.
Page 69 ● When Continue(mute) is set or when FOMA terminal is connected with a flat type earphone/microphone set with switch (optional) or handsfree compatible device, the following operations occur if you close FOMA terminal: ･ While sending your self image, a substitute image is sent to the other party. ･...
Page 70 ■ Composing SMS a Place the cursor at the received call to be set as an address and hold down a for over a second. The SMS composition screen that the phone number of the received call is specified as the address appears.
Page 71 Place a cursor at a received call to delete and press m41. To delete all, press m42. All the received calls also including missed calls within the set ･ delay time are deleted. Select Yes. Adjusting the volume of the caller’s voice Volume Setting ･...
Page 72: Vibrator Setting
Adjusting the ring volume while receiving a call Press % while receiving a call. The volume is set automatically by pressing o or waiting for a while after you stopped key operations. To turn up the volume, press u, r, or j. To turn down the volume, press d, l, or i. ･...
Page 73 Select each item to set. ：Sets a ring tone for an incoming call. Ring alert ･ When you select OFF, no ring tone emits. ･ When you select Melody or Movie ringtone, select a melody or video/i-motion. ：Sets an image displayed for an incoming call. Show image ･...
Page 74 Default No Set Up Press m869 on the stand-by display. Press 1 to 3. No Set Up : Displays the last incoming screen received without giving display priority. Voice call : Displays the a voice call screen by priority. Packet : Displays the packet communication screen by priority.
Page 75 INFORMATION ● When you use the Voice Mail Service or Call Forwarding Service, you can switch to Voice Mail or Call Forwarding by selecting Voice mail or Call forwarding from the submenu while receiving a call. ● The response hold image can be changed. ☛P88 Setting a response hold guidance Status Message You can record your own voice as a response hold guidance.
Page 76 Press m873 on the stand-by display. Select On-hold tone field and press 1. To reset to the default melody, press 2 and go to Step 4. ･ Select On-hold melody field and select a melody. Playing and checking a melody or video/i-motion when selecting ☛P114 ･...
Page 77: Video-Phone
INFORMATION ● If there is an incoming call while Driving Mode is being set in stand-by, the following takes place: ･ In case of voice calls, the other party receives a guidance for Driving Mode and the call is disconnected. In case of video-phone calls, a message indicating that Driving Mode is being set is displayed on the other party’s terminal and the call is disconnected.
Page 78 Allowing the caller to leave message when you cannot answer the call Answer Machine By setting Answer Machine, a greeting will be played and the caller can leave a recorded message when you cannot answer the call. ･ Up to 4 messages can be recorded for voice and video-phone calls in total, a maximum of about 30 seconds for each.
Page 79 Receiving a call while Answer Machine is set A call is received. After the ring tone sounds according to Greeting Response Time, the greeting screen is displayed. ･ When the greeting is set to Preinstalled, the caller hears the guidance “I cannot answer the phone right now, please leave your name and message after the beep (in Japanese)”.
Page 80 INFORMATION ● When Auto Answer (when a flat type earphone/microphone set with a switch (optional) is connected), Voice Mail Service or Call Forwarding Service and this function are set simultaneously, those priorities change with the ringing times set for each service and function. To give priority to Answer Machine, the response time set for this function should be shorter than the ringing times set for Auto Answer, Voice Mail Service and Call Forwarding Service.
Page 81 Select a recorded message to play. The recorded message is played back. ･ During playback, the following operations are enabled: % /ij ：Adjust volume ：Stop Indication of the playing time ■ Deleting a Place the cursor at the recorded message to delete and press m21. To delete all, press m22.
Page 82 Making/Receiving Video-phone Calls Video-phone ....................80 Making video-phone calls ................80 Receiving video-phone calls ................. 84 Setting images to be sent to the other party ..........85 Customizing the display settings during a video-phone call ..... 89 Changing the video-phone settings ......Video-phone Settings 90 Setting of switching between a voice call and a video-phone call .....................
Page 83: Video-Phone
Video-phone The video-phone function is available between terminals that support DoCoMo’s video-phone. By using the video-phone, you can talk on the phone while looking each other images. It is also possible to display a still image, substitute image, etc. instead of your self image. DoCoMo video-phone specifications are compliant with “3G-324M* that has been standardized by the international standard 3GPP*...
Page 84: Compact Light
Enter a phone number on the stand-by display. ･ Entering method is the same as for the voice calls. ･ You can make a video-phone call by specifying the communication speed (64K or 32K) from Customized Call if you enter a phone number and press m3. Press t.
Page 85 INFORMATION ● You can make a video-phone call even by performing in order of Steps 2, Step 1. When t is pressed and the phone number is entered, the video-phone call can be made automatically after about 5 seconds. ● You may not be able to make a video-phone call while executing another function. ☛P468 ●...
Page 86 ● A video-phone call is not available to the terminals not supporting the video-phone function, or to the terminals that are turned off or located outside the service area. If you set Voice call auto switch to ON and attempt to make a video-phone call with an unsupported device, the other party will abort the communications before connected.
Page 87: Receiving Video-Phone Calls
Receiving video-phone calls You cannot receive a video-phone call by pressing the keys other than t or n (Any Key Answer is ･ unavailable). A call is received. The ring alert sounds, the display light turns on and the call indicator lights/ flashes.
Page 88: Setting Images To Be Sent To The Other Party
INFORMATION ● When a video-phone call arrives while a flat type earphone/microphone set with switch (optional) is connected, holding down the headset switch for over a second allows you to answer the call with the substitute image. In addition, when you set Auto Answer, you can respond by sending the substitute image to the caller automatically. ●...
Page 89 Switching the outgoing image between your self image and the substitute image Press t during a call. ･ Each press switches the image between your self image ( ) and the ). ☛P88 substitute image ( ･ When sending your self image, you can also switch to the substitute image by pressing m7.
Page 90 Adjusting the brightness and color density of outgoing images ･ You can adjust the brightness and color density at 5 levels. ･ This setting can be changed only when sending your self image. ･ The brightness and color density may be unable to be changed depending on the setting for Camera Effects.
Page 91 Changing the image to be displayed during video-phone calls Image Setting Change the images to be sent to the other party during a video-phone call such as the substitute image, answer machine image, response hold image, and on-hold image. ･ You cannot set the following still images: ・Still image with a size of more than 176 x 144 (QCIF) ・Animation and Create animation...
Page 92: Customizing The Display Settings During A Video-Phone Call
Switching the in-camera/out-camera ･ Available only while your self image is sent. Default In-camera Press m2 during a call. The image is displayed through the switched camera. ･ Each press switches between the in-camera and out-camera. ･ Even if you switch the camera, the brightness/ color density settings of outgoing image are kept.
Page 93: Changing The Video-Phone Settings
Changing the main screen size ･ The settings are retained after the call is finished. Default Large Hold down p for over a second during a call. ･ Each press switches the screen size in the following order: Large → standard → small → large →...
Page 94: Setting Of Switching Between A Voice Call And A Video-Phone Call
Default Voice call auto switch: OFF Display setting: Both Sub screen: Me Display screen size: Large Send camera image: ON Sending image quality: Normal Display light: Always on (normal) Press m883 on the stand-by display. Select each item to set. Voice call auto switch ：Sets whether to redial a voice call automatically when a video-phone call is not connected.
Page 95: Using The Video-Phone By Connecting With The External Device
Select Yes. Indication ON is set. Using the video-phone by connecting with the external device External Device By connecting FOMA terminal to an external device such as PC by the FOMA USB cable (optional), you can make and receive video-phone calls from the external device. If you want to use this function, install a video-phone application in a dedicated external device or in a PC, and prepare devices such as an earphone/microphone (optional) or USB-compatible Web camera (available in market).
Page 96 Phonebook Phonebooks supported by FOMA terminal ..........94 Registering entries into the FOMA terminal phonebook ..................Phonebook New Entry 95 Registering entries into the UIM phonebook ............Register Entries into UIM Phonebook 99 Setting group names and incoming/outgoing actions..Group Setting 100 Making calls from the phonebook......
Page 97: Settings
Phonebooks supported by FOMA terminal FOMA D701i supports the FOMA terminal phonebook and UIM phonebook. ･ The items that can be registered in the FOMA terminal phonebook and UIM phonebook are as follows: ○ : Available × : Not available...
Page 98 ･ When phonebook entries of different names with the same phone number/mail address are registered in both phonebooks, if you enter the phone number or mail address without searching the phonebook, the name registered in the FOMA terminal phonebook is displayed. ･...
Page 99 Enter a name (Up to 32 one-byte or 16 two-byte characters). ･ Kanji, hiragana, katakana, alphabetic and numeric characters, symbols and pictograms can be entered. However, symbols and pictograms entered may not appear correctly if transferred by infrared communication, etc. ･...
Page 100 グループグループ：Select a group from 1 (Group 1) to 30 (Group 30) and Group グループなしグループなし (No group). is set by default. Group Setting ☛P100 Phone number ：Enter the phone number including the area code (up to 26 digits) and select an icon.
Page 101 Lighting pattern ：Select Yes to set the lighting pattern of the call indicator. ･ If Sync melody or OFF is set, the lighting color cannot be set. When Sync melody is set, the lighting color and lighting/flashing pattern will change in synchronization with the melody.
Page 102 Registering entries into the UIM phonebook Register Entries into UIM Phonebook The maximum number of items that can be registered ☛P94 ･ Press m43 on the stand-by display. Enter the name (up to 21 one-byte or 10 two-byte characters). ･ Kanji, hiragana, katakana, alphabetic and numeric characters, symbols and pictograms can be entered.
Page 103 INFORMATION ● For saving mail addresses of i-mode terminals, the @ and the following domain name (“@docomo.ne.jp”) of the addresses can be omitted, however, it is recommended to save the whole addresses including “@docomo.ne.jp”. For saving mail addresses of i-mode terminals as chat members, save the whole addresses including “@docomo.ne.jp”.
Page 104 Press p. Menu 41 Making calls from the phonebook Phonebook Search You can make a call easily by calling the other party’s phonebook data from the FOMA terminal phonebook or UIM phonebook. ･ The phonebook data can be called by specifying the following search procedure: ・Show All Names ☛P102 ・Group Search ☛P102 ・Name Search ☛P102...
Page 105 ■ Composing SMS a Place the cursor at the party to send SMS and hold down for over a second. ･ When multiple phone numbers have been registered, select a phone number on Select Address screen. Composing and sending SMS ☛P273 ･...
Page 106 Enter a name. ･ You can search the name by entering the first part of the name even if you do not enter the entire reading. Searching the party frequently talked with or sent mail to/received mail from Ranking Search The phonebook data saved in the FOMA terminal phonebook can be sorted by the number of calls that took place (Call frequency rank) or by the number of i-mode Mail sent or received (Mail frequency rank).
Page 107 Enter a phonebook No. Icon set for the first phone number Phonebook No. The party with the specified phonebook No. ･ Zeroes before single- or double-digit phonebook No. can be omitted. Searching by phone number Number Search Enter only a part of phone number to search for the phone numbers that contain it. You can search the entries even if you enter nothing.
Page 108 Checking phonebook entries Search the phonebook and select the phonebook data to display details. You can display the details screen for the previous/next phonebook entry by pressing %. ･･ When Reject/Accept Call, Caller ID Setting or Secret Code is set, is indicated to the right side of the phonebook No.
Page 109 Edit phonebook entries. ･ For details: ☛P96 from Step 3 in “Registering entries into the FOMA terminal phonebook”, ☛P99 from Step 3 in “Registering entries into the UIM phonebook”. Press p. ･ In case of the FOMA terminal phonebook, the phonebook No. entry screen is displayed. Select Overwrite or New entry according to the message displayed after entering the phonebook No.
Page 110 INFORMATION ● On the FOMA terminal phonebook details screen, the UIM phonebook list/details screen or Own Number details screen, press m and select Copy. ● Copy phone number/Copy mail address copies the mail address registered as the first item. To copy the second or after phone number or mail address, place the cursor at the phone number or mail address to copy on the FOMA terminal phonebook or Own Number details screen and copy it.
Page 111 Phone number Copies the first registered phone number (up to 26 digits (20 digits depending on the UIM types) ☛P41. If a timed pause (T) is registered, only the timed pause (T) is deleted. In addition, when “＋” is entered except for at the beginning of the phone number, the number after “＋”...
Page 112 Setting functions for phonebook entries You can set to show/hide caller ID or the video-phone communication speed for each phone number in the phonebook data saved in the FOMA terminal phonebook. In addition, a secret code can be set for each mail address. ･...
Page 113 Setting a secret code for the mail address Secret Code Setting When the other party has registered a secret code for its mail address (mobile phone number@docomo.ne.jp), if you set the secret code as the mail address in the phonebook data, the secret code is automatically added to i-mode Mail composed by searching the phonebook.
Page 114 INFORMATION ● In the FOMA terminal phonebook details screen, press m and select Set/Check → Settings → Secrecy ON. To release Secret Attribute, press m and select Set/Check → Settings → Secrecy OFF. ● If the phonebook entry is registered and edited while Secret Mode is on, Secret Attribute is set for the phonebook entry.
Page 115 INFORMATION ● In the details screen of the FOMA terminal phonebook, press m and select Set/Check → No. of items. ● When checking from the UIM phonebook, press m in the phonebook list screen or details screen and select No. of items. ●...
Page 116 Sounds/Displays/Lights Settings Sound Setting Changing the FOMA terminal ring tone ......Sound Setting 114 Using vibrator to signal incoming calls and alarms ..Vibrator Setting 116 Selecting a sound heard when a keypad is pressed ..Keypad Sound 117 Setting a sound for charging ..........Charge Alert 118 Setting an alarm announcing that the call is about to be cut off ....................
Page 117 Sound Setting Changing the FOMA terminal ring tone Sound Setting Set melodies as ring tones to announce the reception of call, mail, Message R/F, etc. In addition, the sound played while on hold or when opening/closing FOMA terminal can be set. If video/ i-motion is set as a ring tone, a video and/or sound is played for incoming call or mail (Movie ringtone (Chaku-motion)).
Page 118 Melody list The following melodies are provided in the Preinstalled folder by default. Melody names that are too long to be shown on the display are partially omitted. ･ Names in 【】 show the composers. The names of the composers are described in accordance with the JASRAC home page.
Page 119 INFORMATION ● The sound recorded with Sound Recorder can be set for Movie ringtone. In this case, only the sound is played and the image set as the incoming image is displayed on the screen. ● When the video/i-motion with sound and image is set for the ring alert, the incoming image is set for Sync ring alert and then reset the ring alert to OFF, Movie ringtone will be replayed but the ring alert volume becomes silent.
Page 120 Press 1 to 5. ：Vibrates as follows: 0.5 second vibration → 0.5 second pause → 0.5 second Pattern A vibration → 1.5 seconds pause (repeated) ：Vibrates as follows: 1 second vibration → 2 seconds pause (repeated) Pattern B ：Vibrates as follows: 0.25 second vibration → 0.25 second pause (repeated) Pattern C Sync melody ：Vibrates along with the melody selected in Sound Setting.
Page 121 INFORMATION ● When OFF is set, the following sounds are not heard. ･ Confirmation sounds when the battery level is indicated ･ End alert for infrared communication or data transfer ● The keypad sound volume is set according to the setting for Volume Setting. ●...
Page 122 Making FOMA terminal silent Silent Mode Disable the sounds from FOMA terminal in order to prevent disturbance to the people around you by enabling the vibrator for incoming calls or muting the keypad sound. Default not set Hold down # for over a second on the stand-by display. Silent Mode that is specified in the Silent Mode selection is set, (in the general silent mode) or (in the personalized silent mode) is indicated on the stand-by display.
Page 123 Press 2. ：Notifies the arrival of a call or mail by muting the sounds heard from FOMA General terminal and by vibrating FOMA terminal itself. ：The settings can be changed. Personalized Pressing 1 sets the general silent mode and the previous screen reappears. ･...
Page 124 Press 1 or 2. Select a folder and select the image or video/i-motion to be set as the stand-by display. To check the image, place the cursor at the image in the image list and press p. Press o to ･...
Page 125 INFORMATION ● Animation is played up to 16 times repeatedly. ● When Flash movie is set as the stand-by display, playing is brought to a pause after a certain period of time. The melody for Flash movie set on the stand-by display is not played. ●...
Page 126 When a calendar is set ● The days-off and holidays are displayed in red. The settings for the days-off and holidays follow Day Off Setting or the setting for holidays for Scheduler. Note that when Privacy Mode is on (Authorized access set for Schedule) or PIM Lock is on, the day set as day-off in Day Off Setting is not displayed in red and reset to the default display.
Page 127 ■ Setting New arrival a Press 2. b Select information to display. Press o to switch selecting/canceling, press m to select or ･ cancel all items. c Press p. ■ Setting Notes a Press 3. The list of recorded notes is displayed. b Select a note to display.
Page 128 Unread messages ：The reception date and time and the first part of subject are displayed. Selecting the area when this item is displayed at the beginning displays the Inbox folder list. MessageR/ MessageF ：The reception date and time and the first part of titlte are displayed. Selecting the area when this item is displayed at the beginning display the Message R/F list.
Page 129 Canceling the setting items other than images Cancel the settings for the video/i-motion, the i- ppli stand-by display, the calendar for stand-by and the α custom stand-by display and display an image on the stand-by display. Press m8218 on the stand-by display. Select Yes.
Page 130 Press 1. Not to display a portrait image, press 2. ･ ■ Call image priority The call images set in multiple functions are displayed by priorities given below: aFOMA terminal phonebook settings* bFOMA terminal phonebook settings by the groups cSound Setting/Outgoing Call Image/Incoming Call Setting/Video-phone Dialing Image/Video- phone Receiving Setting *1 When Contact Image is set to ON, the setting is available.
Page 131 Press p. Setting the sub-display Sub-display Info Setting Set whether to display the phone number or the mail address when receiving a call or a mail. Default Show callers’ info Press m 8271 on the strand-by display. Press 1. To release, press 2. ･...
Page 132 AC adapter connected ：Sets how to light the display when connecting to the AC adapter (desktop holder) or to the DC adapter. ･ Setting Terminal settings lights the display according to the settings of the above items. ･ Setting Always on lights the display at High. Press p.
Page 133 Setting the menu display format/the menu design Menu Setting The menu display format for the normal menu and the custom menu can be changed. Whether to display the function description when a menu item is selected can be set as well. ･...
Page 134 Select a function to change icons and select an image from the image folder list. ■ Canceling a menu icon a Place the cursor at the icon to be canceled, press m1 and select Yes. To cancel all, press m2 and select Yes. ･...
Page 135 Press m826 on the stand-by display. Select Indicator light field and press 1 or 2. ･ If ON is set, the call indicator flashes in blue at around 6-second intervals when there is a missed call (voice call/video-phone/recorded message) with FOMA terminal closed. It flashes in green at the same intervals when there is unread information (mail/SMS/Message R/F/chat mail).
Page 136 List of Illumination Colors ････ Pattern 1 Pattern 2 Pattern 3 Pattern 4 ････ Pattern 5 Pattern 6 Pattern 7 Pattern 8 ････ Pattern 9 Pattern 10 Pattern 11 Pattern 12 ･...
Page 137 Menu 8215 Setting clock display Clock Display Format Set whether to display the clock on the stand by display. The design, display format (24 hour/12 hour) and the language used to display the day of the week can also be set. ･...
Page 138 Safety Settings Security code Security codes available with FOMA terminal ........... 136 Changing the terminal security code ....Change Security Code 137 Setting the PIN code ..................137 Unblocking PIN lock ..................139 Restricting Mobile Phone Operations Various lock functions ................. 140 Preventing unauthorized use of your terminal ......
Page 139 Security code Security codes available with FOMA terminal Some FOMA terminal functions for convenient use require the entry of security codes. There are the network security code for use in network services and DoCoMo e-site, password for i-mode in addition to the terminal security code for various functions.
Page 140 ● Be sure to avoid recognizable numbers such as the last 4 digits of the phone number and not to be revealed the security codes or password by others. ● If a wrong terminal security code is entered 5 times consecutively, the power is automatically turned off. If the power is turned on again or the correct terminal security code is entered, the number of accumulated times is cleared.
Page 141 Press 1. To cancel the setting, press 2. ･ Enter the PIN1 code. ･ The PIN1 code is set to “0000” at the time of subscription. When PIN1 Code ON/OFF is set to ON When FOMA terminal is powered on, the PIN1 code entry screen is displayed. After entering the correct PIN1 code, the stand-by display appears.
Page 142 Press p. ･ If the current PIN1/PIN2 code is not correctly entered, the message indicating that is displayed. Press o and enter the correct PIN1/PIN2 code. If a wrong PIN1/PIN2 code is entered 3 times consecutively, the PIN1/PIN2 code is locked. Press o to cancel the PIN lock. INFORMATION ●...
Page 143: Self Mode Pim Lock Keypad Dial Lock Privacy Mode Setting
Restricting Mobile Phone Operations Various lock functions A variety of lock functions are available to prevent FOMA terminal from being used by others or to keep your private information and phonebook entries confidential. You can choose the function to suit your needs. ･...
Page 144 Preventing unauthorized use of your terminal All Lock Menu operations are disabled to prevent unauthorized use of FOMA terminal by others. Calls cannot be made or received when All Lock is on. To make emergency calls (110, 119 or 118) when All Lock is on, enter the emergency call number on the stand-by display and press n.
Page 145 Enter the terminal security code and select each item to set. ：Sets the terminal whether to enable or disable Remote Lock. Remote lock ･ When OFF is set, the following items cannot be set. Monitoring period：Sets the time limit from the time of the first incoming call to the time until the specified number of calls will be made (in the 1 to 10 minutes range).
Page 146: Use Voice Mail Service
INFORMATION ● The counting of the number of incoming calls is only effective only for the first call made from the specified sender. After the counting has been started, additional incoming calls from other senders are not counted. ● Even if a call is rejected, or transferred by Voice Mail Service or Call Forwarding Service (excluding when the ringing time is 0 sec), that call is counted as an incoming call.
Page 147 Preventing display of the phonebook or schedule PIM Lock PIM Lock prevents the display of and tampering with private information: ･ This function cannot be set when Reject Non-Reg. Caller is set to ON. ･ When PIM Lock is set, the previous redial data and received call history are deleted. Note that making or receiving calls after the setting are recorded and dialing from the redial data or received call history can be performed.
Page 148 Prohibiting keypad dial Keypad Dial Lock Disable making a call by dialing a phone number (Keypad Dial). ･ You can make a call using the phonebook and redial data. ･ When this function is set to ON, the previous redial data and received call history are deleted. The numbers dialed from the phonebook after the setting is made are recorded under the redial data.
Page 149 Enter the terminal security code and select each item to set. ･ When you use the following functions in Privacy Mode, set whether to enter the terminal security code. In addition, set the time period until Privacy Mode starts automatically if you do nothing on FOMA terminal in stand-by.
Page 150 INFORMATION ● While you use the function restricted by Privacy Mode, once the terminal security code have been entered, further authentication is not required until the stand-by display is displayed by pressing f. The same rule applies when multiple items are set to Authorized access in Privacy Mode Setting. Note that when you use the function which is not subject to Privacy Mode and requires the terminal security code entry, you need to enter the terminal security code when activating the function.
Page 151 Setting keylock each time FOMA terminal is closed Lock on Close If you set Lock on Close to ON, you need to enter the terminal security code each time you open FOMA terminal. This prevents unauthorized use of your FOMA terminal by others. To make emergency calls (110, 119, or 118) when Lock on Close is on, enter an emergency call number on the terminal security code entry screen and press n.
Page 152 INFORMATION ● Setting Secret Attribute for the phonebook data ☛P110 ● Setting Secret Attribute for the schedule data ☛P376 Rejecting/accepting incoming calls from the specified phone numbers Reject/Accept Call Reject/Accept Call is set for each phone number registered in the FOMA terminal phonebook. ･...
Page 153 Enabling Reject/Accept Call ･ The setting of this function applies to all phone numbers with Reject/Accept Call set. ･ Reject Call and Accept Call cannot be enabled simultaneously. Default Cancel settings Press m865 on the stand-by display. Enter the terminal security code and press 2 or 3. To cancel the setting, press 1.
Page 154 Select each item to set. Incoming setting ：Sets operation for incoming calls that do not notify the caller ID. ･ When Disable settings is set, the ring tone set in Phone in Sound Setting sounds. ･ Setting Call Rejection rejects an incoming call. ･...
Page 155 Press m818 on the stand-by display. Select each item to set. Delayed ring alert ：Specifies whether to enable Mute Seconds Setting. ･ When OFF is set, the following items cannot be set. Delay time (sec) ：Sets the time between the arrival of calls and the start of ringing (between 1 to 99 seconds).
Page 156 When Reject non-Reg. Caller is set When receiving a call from the party who is not registered in the phonebook, the call is disconnected without activating a ring tone and the caller hears busy signals. ･ Rejected calls are recorded in the received call history. ･...
Page 157 MEMO...
Page 158 Camera Before using the camera ................156 Shooting still images with Camera ........Still Camera 160 Recording videos with Movie Camera ......Movie Camera 162 Setting the still image/video size or the saving method ............Still Image Setting/Recording Setting 165 Shooting in various modes ................
Page 159 Before using the camera Still images and videos can be shot with your FOMA terminal camera. Still images and videos can be displayed/played on FOMA terminal or saved to the miniSD memory card, or can be sent via i- mode Mail as attachments. ･...
Page 160 ･ If battery power goes out before saving a shot still image or video, it is not saved. ･ Because the camera consumes a lot of battery power, do not leave the camera activated long time or do not keep shot images long time without being saved. ･...
Page 161 during the setting. ☛P167 d Auto timer ：Indicates when the compact light is on. ☛P160, P162 e Compact light ：Indicates f Indicator ：During stand-by for shooting Indicates the available storage space of the memory to save during the normal shooting. During auto timer countdown, indicates the remaining time untill the shutter is released.
Page 162 ■ Number of still images that can be stored in FOMA terminal (estimates) Unit: number of images Size 960 x 1024 x 96 x 72 128 x 96 176 x 144 240 x 320 352 x 288 640 x 480 480 x 640 1280 1280...
Page 163 Capacity: 16 MB Capacity: 32 MB Size Recording Size Quality Quality restrictions type 128 x 96 Video + Voice attachment Video only 176 x 144 Video + Voice (490 KB) Video only 320 x 240 Video + Voice Video only None 128 x 96 Video + Voice Video only 176 x 144 Video + Voice Video only...
Page 164 ■ Sending the shot still image via mail a Press a. A confirmation screen is displayed asking whether or not to save the shot still image. Select Yes to save the image in FOMA terminal, and the mail composition screen is displayed. Depending on the image size or file size setting, a confirmation screen is displayed asking whether to convert the image to stand-by size or save it to Data Box.
Page 165 ■ Checking the saved still image immediately a Press p and select the still image to check. Press c twice to return to the still image shooting screen. ･･ When the miniSD memory card is selected as the memory to save, select a folder by pressing p and then select the still image.
Page 166 Point the camera at the object and press o or j. The shutter sound is heard, the compact light blinks in red, and the call indicator blinks in blue, for every 2 seconds respectively. Recording is started and switches to Press o to pause while recording.
Page 167 ■ Adding the video to phonebook entries a Press m2, then press 2 or 3 and select Yes. The recorded video is saved to FOMA terminal and the phonebook registration screen is displayed. ･ To update the entry, select the phonebook entry to register. ･...
Page 168 ● You should avoid a continuous shooting of video/sound that lasts 10 hours or more, because you may fail to display or replay the video/sound if it is stored in the miniSD memory card. ● When a call arrives or the alarm or schedule alarm time gets to the setting time during video recording, the recording is stopped at that point.
Page 169 Details on the set items ○ : Setting available × : Setting not available Still image Recording Item Description Setting Setting Sets the image size for still images to be shot. ☛P169 Image size* ○ × ･ The image size cannot be set to 240 x 320 (stand-by), 640 x 480 (VGA), 480 x 640 (VGA), 960 x 1280 (SXGA), or 1024 x 1280 (1.3M) during shooting with the in-camera.
Page 170 Shooting in various modes Zooming ･ The available display magnifications depend on the camera mode and image size, which are as shown below: Shooting mode Image size Display magnification Still Camera 96 x 72 (phonebook), 128 x 96 (Sub-QCIF), 1 to 4 times (16 levels) 176 x 144 (QCIF), 240 x 320 (stand-by) 352 x 288 (CIF), 480 x 640 (VGA) 1 to 2 times (6 levels)
Page 171 Shooting nearby object Macro When shooting a very near object with the out-camera, set the macro mode switch to (macro). With the macro mode you can shoot the subject from a short distance. ･ During the macro mode, shoot from a distance of about 7 to 10 Put your fingertip here cm, and about 50 cm or more during the standard mode.
Page 172 Frames You can select frames saved in FOMA terminal or frame images downloaded from sites. : Frame is set : Frame is canceled ･ The frames saved in FOMA terminal by default are applicable to image sizes of 176 x 144 (QCIF) and 240 x 320 (stand-by).
Page 173 ■ During video recording LP ：Provides the lowest quality. File size is small and maximum duration of recording becomes longest. STD ：Standard quality HQ ：The video motion becomes smooth. HQ + ：Provides the highest quality. File size is large and maximum duration of recording becomes shortest.
Page 174 Color density -2 -1 ± 0 +1 ･ Adjusting color density may not have much effect depending on the image to be shot. Restoring the default setting during shooting ･ The following functions are reset to the default settings: ・Camera effects ・Zoom ・Brightness ・Color density...
Page 175 (kanji/kana and pictograms) or data such as melody and image with the vertical and horizontal patterns. The left QR code shows the text data “FOMA D701i”. Scanning the code When scanning a code, set the macro mode switch (macro) and scan it with the out-camera from the distance of about 7 to 10 cm.
Page 176 Scan the code. When you point the out-camera toward the code, it is scanned automatically. If scanned correctly, a confirmation sound is played and the scanned data is displayed. ･ If data exceeds 11,000 one-byte or 5,500 two-byte characters, exceeded characters are not displayed, but can be saved.
Page 177 Using scanned data ･ The available operations vary depending on the scanned data. Example Adding data to the phonebook Press m64 on the stand-by display and open the lens cover. Press p and select scanned data to use. ■ Deleting scanned data a Place the cursor at the scanned data to delete, press m31 and select Yes.
Page 178 i-mode/i-motion What’s i-mode? ..................... 176 Displaying sites Displaying sites .................... 182 Reading and operating sites ................ 184 Using My Menu ................My Menu 187 Changing your current i-mode password into another number ................... Change i-mode Password 187 Displaying Internet websites ........Internet Connection 188 Registering websites and i-mode sites for quick browsing ...
Page 179 What’s i-mode? With i-mode, you can use online services such as connecting to Sites (Programs) or Internet websites, or sending and receiving i-mode Mail by using i-mode compatible FOMA terminal (hereinafter called as i-mode terminal). ･ Sites (Programs) connection You can access various online services such as weather information or news provided by IPs (Information service providers) from Menu List of iMenu.
Page 180 Sites (Programs) connection You can access sites using a simple key sequence and use various online services provided by IPs (Information service providers). For example, you can check your bank balance, make wire transfers, reserve tickets, watch news, search dictionaries, download melodies, etc. Displaying sites When you are connected to the i-mode Center, iMenu is displayed first.
Page 181 Other convenient functions ■ i-channel This service is provided by DoCoMo or IPs and delivers graphical information such as news and weather information to your i-mode terminal. You can receive information regularly, and read the latest information as it appears on the stand-by display as ticker. You can also view the information in the channel list that is displayed by pressing c.
Page 182 ■ i- ppli DX α ppli DX is more convenient and enjoyable i- ppli. In conjunction with the i-mode terminal data α α (such as mail, call log or phonebook data), i- ppli DX allows you to compose a message on your α...
Page 183 ■ UIM operation restriction function When the UIM containing user information (phone numbers, part of phonebook data, etc.) is inserted in your i-mode terminal, this function restricts operations of melodies, still images and i-motion downloaded from sites or received by mail. When the terminal is turned on with another UIM or no UIM inserted, playing or displaying of these obtained files will be disabled.
Page 184 Internet connection You can connect to i-mode compatible websites via the Internet by entering the addresses (URLs). Displaying Internet websites ☛P188 ･ INFORMATION ● Internet websites not compatible with i-mode may not be displayed correctly. i-mode compatible sites refer to websites created using i-mode compatible tags.
Page 185 Displaying sites Menu 21 Displaying sites Press d1 on the stand-by display and select ENGLISH. Flashes in i-mode communication. Press o on the i-mode connecting screen to ･ stop connection. Hold down 8 for over a second during site ･ display to disconnect i-mode.
Page 186 Connecting to SSL pages You can display SSL compatible sites (SSL pages) using the same operation as for ordinary sites. ･ Some SSL pages may not allow connection unless the date and time is set. ･ To connect to a FirstPass compatible site, you need to download a user certificate for the site from the FirstPass center and save it on the green UIM.
Page 187 Reading and operating sites Selecting links and items During i-mode connection, the following operations are available depending on sites: Link Select to jump to a related page from the currently displayed page. A link is highlighted when the cursor is placed over. Character entry field (the character types and maximum number of characters that can be entered depend on the character entry field) Radio button (...
Page 188 Flash function Flash is an animation technology that uses images and sounds, which makes colorful animations and expressive sites be displayed. Images using Flash (Flash movie) can be downloaded to an i-mode terminal and set as the stand-by display or incoming image. ･...
Page 189 2 pages before the 1 page before the Current page current page current page Indicates you can proceed to Indicates you can return to the next page. the previous page. INFORMATION ● When you display page A → page B → page C in this order ( a , b ), return to page A ( c , d ), and proceed to page D ( e ), the display →...
Page 190 INFORMATION ● In the list of URL history, bookmark, i-mode shortcut, or screen memo, press p. Using My Menu My Menu You can register i-mode sites in My Menu, which allows you to quickly access the sites later. ･ Up to 45 sites can be registered. ･...
Page 191 Select Current Password field and enter the i-mode password. Select New Password field and enter a new password. Select New Password (Confirmation) field and re-enter the password entered in Step 3. Select Select. ･ When there is an error or omission in the entered contents, an error screen is displayed. Select Re-enter and operate again.
Page 192 INFORMATION ● In the site screen, press m and select Go to location → URL history. ● When the number of recorded URLs exceeds 20, the oldest URL will be overwritten. Displaying characters correctly Character Encode When characters are not displayed correctly on i-mode or Internet web sites, they may be displayed correctly by changing the character encode.
Page 193 Menu 22 Displaying websites or i-mode sites from Bookmark Press d2 on the stand-by display. Select a folder. : No bookmark : Bookmark present Select the bookmark to display. ■ Checking the URL a Place the cursor at the bookmark to check and press p. INFORMATION ●...
Page 194 Select the registration destination. ) corresponds to the dial key (0 to 9) used to display the site. ･ The icon number ( INFORMATION ● In the bookmark list, the icon changes from when registered. ● You can display the i-mode shortcut list by pressing d91 on the stand-by display. To cancel i-mode shortcut, place the cursor at a bookmark, press m1, and select Yes.
Page 195 Place the cursor at the bookmark to move and press m61. ■ Moving selected bookmarks a Press m62 and select bookmarks. Press o to select or cancel a bookmark and press m to select or cancel all. ･ b Press p. ■...
Page 196 Menu 24 Displaying screen memos Press d4 on the stand-by display. Select the screen memo to display. : Ordinary screen memo : Protected screen memo The available operations are the same as on site displays with a few exceptions. ☛P184 ･...
Page 197 INFORMATION ● All of the protected screen memos are deleted when Delete All Data is performed. ☛P394 ● In the screen memo screen, press m and select Protect or Release. Deleting screen memos ･ Protected screen memos cannot be deleted. When you delete all screen memos, protected ones remain undeleted.
Page 198 Select each item to set. ･ You cannot change file restriction for image files downloaded from sites. ･ For an image that is prohibited from being attached to mail or output from FOMA terminal (File restricted is displayed), you can change the display name only. ･...
Page 199 INFORMATION ● Some melodies may not play correctly. ● In Silent Mode, a confirmation screen is displayed asking whether to play the melody. Select Yes to play at the ring volume for calls set in Ring Volume Setting. ● When the memory for melodies is not enough or the maximum number of melodies is exceeded, a confirmation screen is displayed asking whether to delete melodies saved in FOMA terminal.
Page 200 Select the start position of the copying range and select the end position. Press m before specifying the start position to select all the text. ･ Press c to specify the start position again. ･ Press m or p after specifying the start position to move the cursor to beginning or end of the ･...
Page 201 Registering URLs in phonebook Add URLs to the phonebook from the bookmark list or screen memo list. You can register a new entry or add data to an existing entry. ･ The registered data may be changed when you update an existing entry. Confirm the data in the phonebook edit screen.
Page 202 INFORMATION ● Even if you set the connection timeout to Unlimited, a connection with the i-mode Center may be interrupted due to poor signal conditions, etc. Menu 296 Changing the i-mode host ISP Connection Communication You do not have to change the settings when using DoCoMo i-mode service. Default mode(FOMA Card) ■...
Page 203 Menu 292 Setting image display, lighting and sound effects Image & Effect Setting You can set image display, lighting and sound effects (when playing Flash movie) on a site, screen memo, Message R/F, etc. Default Image: Display Animation: Display Use saved data: Yes Set lighting: Always on Sound effect setting: ON Press d92 on the stand-by display.
Page 204 Menu 293 Setting colors on displayed sites Display Color Setting Default Font/BG color: Default Link color: Default Press d93 on the stand-by display. Select Font/BG color field and press 1. To choose not to specify the font/background color, press 2 and go to Step 5. ･...
Page 205 Receive a Message R/F. Flashes Flashes : Unread Message R exists. : Unread Message F exists. Reception result scrolls. Reception completed Number of received Message R/Fs When reception fails, “×” is indicated after Message R or Message F. flash and Receiving messages... is displayed. The Message R/F ring alert sounds, the call indicator lights/flashes, and the reception result screen is displayed.
Page 206 Displaying newly-received Message R/F Press 2 or 3 on the reception result screen. ･ The received Message R is saved in Message R and the received Message F is saved in Message F. Select a Message R/F. When a melody is attached, it plays automatically. Auto play can be turned off. ☛P264 ･...
Page 207 Select each item to set. Select ring alert：Select Melody or movie ringtone and then select a melody or video/i-motion. To disable the ring alert, select OFF. Playing and checking a melody or video/i-motion ☛P114 ･ Incoming msg. lighting ：Sets the lighting pattern and lighting color of the call indicator. ･...
Page 208 Reading the Message R/F list/view screen ･ Reading Message F is the same as that of Message R. ■ Reading the Message R/F list screen Page number/total page count is displayed at the top of the Message R/F list screen. Reception date/time and subject are displayed in the message list field.
Page 209 Protecting Message R/F Protect Message Maximum number of Message R/Fs that can be protected ☛P39 ･･ Unread Message R/F cannot be protected. Display the Message R/F list. Place the cursor at the Message R/F to protect and press m21. The Message R/F is protected and the icon changes from To cancel protection, place the cursor at the Message R/F to cancel and press m23..
Page 210 INFORMATION ● In the Message R/F view screen, press m and select Delete. Selecting the type of Message R/F to display Display by Type ･ You can select from Display all, Display unread only, Display read only, or Display protected. Display the Message R/F list.
Page 211 ● Certificate contents displayed User … (Common Name) Server name, administrator name, or discrimination number … (Organization) Company name etc. … (Country) Country name Issued by … (Common Name) Server name, administrator name, or discrimination number … (Organization Unit) Departments or other positions in the company …...
Page 212 Enter the PIN2 code. ･ If the PIN2 code is not entered within 60 seconds, the request is canceled. Select Download and select Continue. ･ The downloaded user certificate is added to the certificate list. ☛P207 INFORMATION ● Packet communication fee is not charged for connection to the FirstPass center. ●...
Page 213 Menu 299 Changing the certificate host Certificate Host If you use services other than FirstPass, set the connection destination. If you change this setting, you cannot connect to the FirstPass center. Usually, you do not need to change this setting. Default DoCoMo Press d99 on the stand-by display.
Page 214 ■ i-motion replayed while the data is being downloaded i-motion is replayed while the data is being downloaded. After finishing the replay, the operation is the same as the i-motion replayed after downloading data. ･ During playback, the following operations are enabled: o ：Pause/replay %/ij ：Adjust volume p ：Stop (Press o to play back the i-motion from the beginning.)
Page 215 ■ Setting as the stand-by display a Press m1 and select YES. ･ For video/i-motion that can be enlarged, same size or large size can be set. ･ When the i- ppli stand-by display has been set, a confirmation screen appears asking α...
Page 216 Mail FOMA terminal mail function ............... 214 Displaying Mail menu ..............Mail Menu 220 Composing i-mode Mail/Deco-mail Composing and sending i-mode Mail ....... Compose Message 221 Composing and sending Deco-mail .......... Deco-mail 223 Attaching files ................Attachment 229 Using mail templates ..................232 Saving i-mode Mail for sending later ........
Page 217 FOMA terminal mail function FOMA terminal provides 2 mail functions: i-mode Mail and SMS. ･ To use i-mode Mail, an i-mode subscription is required. ･ You can use SMS without an i-mode subscription. Sending and receiving mail FOMA terminal → FOMA terminal FOMA terminal →...
Page 218 ･ Of the mail through carriers other than above, those from the specified domain(s) are received. ･ Mail from NTT DoCoMo’s i-mode, i-shot, charge notice service, e-billing charges notification, and visualnet is all received. b Receiving/rejecting mail from specified addresses [Receiving Mail (Reject/Receive Mail Settings) →...
Page 219 c Receiving/rejecting only i-mode Mail [Receiving Mail (Reject/Receive Mail Settings) → Receive only i-mode mail, Reject only i-mode mail] ･ You receive (reject mail via the Internet)/reject mail only between i-mode terminals. d Rejecting mass i-mode Mail senders [Receiving Mail (Other Settings) → Reject Mass i-mode Mail Senders] ･...
Page 220 When you cannot receive mail The i-mode Mail received by the i-mode Center is immediately sent to your i-mode terminal. However, when you cannot receive mail because the terminal is turned off or out of the service area, i-mode Mail is stored in the i-mode Center.
Page 221 FOMA terminal i-mode Center PC, etc. Sent as Still image sent attached imge by i-shot Internet Internet ①Mail containing attached image, URL or icon (URL) for attached image ②Click URL (Web To) in mail* FOMA terminal ③ Image data* i-shot Center *1 When mail containing a URL for the attached image is received mova terminal...
Page 222 ･ The i-motion Mail Center stores images for a maximum period of 10 days and deletes the images automatically after that period. ･ i-motion Mail compatible terminals can receive video files of up to 500 Kbytes. When attached videos are downloaded, the image sizes are automatically changed to fit the terminal screen.
Page 223 When you cannot receive SMS SMS sent to your FOMA terminal is received by the SMS Center and sent to your FOMA terminal immediately. When you cannot receive messages because the terminal is turned off or outside the service area, the messages are stored in the SMS Center. INFORMATION ●...
Page 224 Composing i-mode Mail/Deco-mail Menu 12 / Composing and sending i-mode Mail Compose Message Hold down a for over a second on the stand-by display and select field. Remaining number of one-byte characters Mail composition screen that can be entered Select Direct input and enter the address (up to 50 one-byte characters). ･...
Page 225 INFORMATION ● You can also compose i-mode Mail by placing the cursor at the phonebook entry containing a mail address and pressing a. ● You can use fixed phrases to enter face marks, greetings and replies in the message. ● When mail larger than 10,000 bytes is automatically saved due to conflict with other applications, part of the mail being composed may not be saved.
Page 226 b Select an input method. c Select CC or BCC and enter a mail address. ･ Also TO can be selected. ･ When Mail group is selected, the registered mail address is displayed for TO, CC and BCC. ■ Changing TO, CC and BCC a Place the cursor at the address to change and press m8.
Page 227 ■ Flow of Deco-mail composition Step 1 Display the message text entry screen Start composing i-mode Mail and display the message text entry screen. Step 2 Enter decorated characters and images Step 2 Enter characters and decorate Press a, select the decoration method Press t at the start position of decoration range and press o at the end and enter characters.
Page 228 ：Inserts separating lines (ruled lines). Insert line ：Changes the background color. Background color ：Restores the previous condition. Back to original Press m8 and check the decoration. You can check the set decoration and the accurate remaining number of bytes that can be entered. After checking the decoration, press o.
Page 229 ■ Inserting images (example of decoration a Select b Select Phone memory, and select a folder and then an image. To insert an image saved in the miniSD memory card, select miniSD card, press 1 or ･ 2, and select a folder and then an image. ･...
Page 230 ■ Inserting lines (ruled lines) (example of decoration a Select A line (ruled line) is inserted in the color specified with font color ( Line (ruled line) ■ Changing text background color (example of decoration a Select and select a color. ･...
Page 231 Decorating characters after specifying range You can decorate characters or change the decoration of characters in the message text. ･ The number in parentheses ( ) in Step 4 indicates the example of decoration in P223. ･ You cannot insert lines or images, or change the background color. Specify the decoration first. Select on the mail composition screen.
Page 232 INFORMATION ● In the message text entry screen, press m and select Decorate mail → Edit decoration. ● Press m8 on the message text entry screen to display the accurate remaining number of bytes that can be entered at the lower right of the screen. Downloading mail templates Mail templates can be downloaded from sites.
Page 233 The data recorded with Sound Recorder is saved as i-motion and can be attached to mail. ･ When sent to other than FOMA D701i, D901i, or D901iS, melodies may not play correctly at the receiver side. Select field on the mail composition screen.
Page 234 ■ Attaching video/i-motion (i-motion Mail) a Select i-motion. b Select Phone memory and select a folder. ･ To select from the miniSD memory card, select miniSD card and select a folder. ･ To record and attach video, select Use video camera and record. Go to Step 3. The size of video image is automatically set to 176 x 144 (QCIF).
Page 235 Using mail templates You can register the contents of i-mode Mail in mail template for entering the same sentence at the beginning of messages or sending similar messages many times. You can easily compose i-mode Mail by using mail templates; adding and editing the contents. Deco-mail template is a template for Deco-mail that has the layout, decoration, etc.
Page 236 Using templates while composing mail Read Template You can read templates while composing new i-mode Mail. ･ Templates cannot be read while Keypad Dial Lock is set. Press m51 on the mail composition screen. Select the template to read. : Still image of up to 10,000 bytes : Melody : Still image of up to 10,000 bytes + melody ･...
Page 237 Press m52 on the mail composition screen and select Yes. Press p. To overwrite a saved template, press a, select a template, and select Yes. The preinstalled ･ templates cannot be overwritten. ･ Display name can contain up to 20 one-byte or two-byte characters. ･...
Page 238 Menu 14 / Menu 15 Editing and sending unsent/sent i-mode Mail Example Editing unsent mail Press a4 on the stand-by display and select a folder. ･ is displayed for SMS. For sent mail, press a5 and select a folder. ･ Select the mail to edit.
Page 239 Receiving and handling i-mode Mail Receiving i-mode Mail Mail Auto Receive When there is incoming i-mode Mail, it is automatically received and you are informed by the screen display, ring tone, vibrator and/or call indicator. The received i-mode Mail is saved in Inbox. Maximum number of received mail that can be saved ☛P39 ･...
Page 240 ● If the data size of received mail (number of characters, attachment file size) exceeds the limit (maximum number of characters) set with Limit Mail Size in “Options”, the attachments are deleted at the i-mode Center and cannot be received. ●...
Page 241 INFORMATION ● To display the folder list when Privacy Mode is active (Authorized access set for Mail), entry of the terminal security code is required. Also, when Privacy Mode is active (Authorized access set for i- ppli), selecting a α Message i- ppli folder requires entry of the terminal security code.
Page 242 保留受信削除保留 Select (Hold) for each mail and select (Receive), (Delete) or ･保留 When is selected, the mail is stored at the i-mode Center. It can be received by using Check i-mode Message etc. ･削除ｉモードセンターから全てのメール To delete all mail stored at the i-mode Center, select for ...
Page 243 Place the cursor at the mail to reply and press p. The sender’s mail address or phone number of the received mail is entered field, “RE:” followed by the subject of the received mail in field (for only i-mode Mail), and “>” followed by the received message text in field.
Page 244 INFORMATION ● In the received mail view screen, press m and select Reply/Forward → Forward. ● Regarding the attachments to received mail (still image and melody), files that are prohibited from being attached to mail or output from FOMA terminal are not attached to forward mail. ●...
Page 245 ● When received mail with a still image attached is displayed, the attached still image is automatically displayed. Note that, the still image inserted in the message text of received Deco-mail is automatically displayed, but the still image attached to Deco-mail is not displayed automatically. Select the file name of still image to display the image.
Page 246 Playing and saving i-motion from i-motion Mail When video/i-motion is attached to mail and sent, it is stored at the i-motion Mail Center and mail containing a URL to view the i-motion is received. Select the URL to download and play or save the i-motion.
Page 247 Playing and saving attached melodies Play/Save Melody ･ If the sender uses a terminal other than FOMA D701i, D901i, or D901iS, the received melodies may not play correctly. Playing melodies Press a1 on the stand-by display and select a folder.
Page 248 ■ Displaying data as text (data display) a Place the cursor at the melody and press m65. ･ To return to the title display, place the cursor at the first row of the displayed data and press m65. ･ This function is not available with melodies that appear under the message. INFORMATION ●...
Page 249 Deleting attachments Delete Attachment You can delete still images and melodies attached to received mail. ･ Melodies displayed in the message or links to start i- ppli cannot be deleted. α ･ Still images exceeding 10,000 bytes can be deleted only from mode folder of Image (My Picture).
Page 250 INFORMATION ● When decorated mail is received from PCs, operations may not be the same as on PCs because some decorations are not supported by i-mode terminals. ● When there is more than one data item attached in the message text (links to start i- ppli or melodies α...
Page 251 Reading the mail list/view screen ■ Reading the received mail list screen Folder name and page number/total page count are displayed at the top of ① the received mail list screen. Reception date/time, sender and subject (for ② SMS, beginning of message) are displayed in the mail list. : Unread : Unread (unable to reply) : Read...
Page 252 ■ Reading the received mail view screen Receiver icon* , status icon, attachment icon, SMS icon, and mail number/ count are displayed at the top of the received mail view screen. *1 TO, CC or BCC is indicated (for i-mode Mail). : Reception date and time : Sender : Receiver (TO)
Page 253 ● When there are attachments or links to start i- ppli, the icon, file name, etc. are displayed on the view screen. α Type Icon Page Still image : Can be attached to mail and output from FOMA terminal P241 : Cannot be attached to mail or output from FOMA terminal : Attachment of still image exceeding 10,000 bytes/still image exceeding 10,000 bytes before download...
Page 254 INFORMATION ● When Message i- ppli is downloaded, a folder for Message i- ppli is automatically created in each of α α Inbox, Outbox, and Unsent messages. The automatically created folder is named with the name of Message i- ppli downloaded, which cannot be changed. α...
Page 255 INFORMATION ● To check multiple mail addresses at one time, press m on the mail view screen and select Display → Display address. In the received/sent/unsent mail list, place the cursor at the mail to display mail address, press m and select Display → Display address. All receivers’ addresses are displayed for sent/unsent mail, and the addresses of sender and receivers (except you) for received mail (TO: and CC: are also displayed).
Page 256 Press m74. ■ Sorting the sent mail list a Press m5. Press 1 to 3. INFORMATION ● Closing the received or sent mail list returns the sorting order to By date. ● When By sender or By address is set, the mail will be sorted by mail address not by name in the phonebook even if the mail address is registered in the phonebook.
Page 257 Place the cursor at the received mail to protect and press m31. The mail is protected and the icon changes to one of the following: Received mail (read) (unable to reply) (replied) (forwarded) Sent/unsent mail : To cancel protection, place the cursor at the mail to cancel and press m34. ･...
Page 258 Press a1 on the stand-by display. ■ Deleting all mail a Press m46 and enter the terminal security code. Go to Step 4. Select a folder and press m2. To delete one item, place the cursor at the received mail to delete and press m 2. ･...
Page 259 Select Yes. INFORMATION ● Unsent mail can be deleted using the same operation. ● In the folder list, press m and select Delete message. ● In the mail view screen, press m and select Delete. Useful functions of mail When the message of i-mode Mail or SMS contains phone numbers, mail addresses or URLs, select them to make calls (Phone To/AV Phone To), compose i-mode Mail (Mail To), or connect to sites (Web To).
Page 260 INFORMATION ● In the view screen for sent mail, mail template, or SMS in the UIM, press m and select Move/Copy or Copy. ● When text in the Date To format is included in the message, it needs to be copied and pasted to Notepad before saving as schedule.
Page 261 Setting mail Setting mail functions of FOMA terminal Mail Setting The following functions can be set: Function Description Page Sort Criteria Sorts received/sent mail automatically to designated folders. P258 Signature Sets the signature to be inserted in mail. P261 Message Retrieval Setting Sets the items to inquire to the i-mode Center.
Page 262 Press m1 and set the sort criteria. ■ Specifying a mail address Sorts mail by sender/receiver mail address. Specify an entire address including characters following the @ symbol (up to 50 one-byte characters). You cannot sort mail by specifying part of the mail address. If you specify a phone number, you can sort SMS as well.
Page 263 Specify the priority. The new criteria is added above the selected row. ･ When setting the first criteria in the list, select [Add last]. ･ To add the criteria to the end of the list, select [Add last]. ･ Criteria are listed in the order of priority. ･...
Page 264 Press 1 and press m6. To sort sent mail automatically, press 2 and press m6. ･ Press 1. To cancel auto sort, press 2. ･ Menu 194 Registering signature for mail Signature You can register the signature to be inserted in the message of i-mode Mail or SMS. You can also set whether to automatically insert the signature when you compose mail.
Page 265 Menu 196 Setting to select and receive only necessary mail Receive Option Setting Default OFF Press a96 on the stand-by display. Press 1. To cancel the setting, press 2. ･ Menu 198 Registering addresses in a mail group Mail Group Setting By registering multiple mail addresses in a mail group, multiple addresses can be set by a simple operation when composing i-mode Mail.
Page 266 Press a and select each item to set. Address Type：Sets TO, CC and BCC. ･ TO is the main address. ･ CC is the address to which you want to send a copy of the mail. ･ BCC is the address to which you want to send a copy of the mail but which you do not want to be known to other receivers.
Page 267 Menu 1991 Setting the display style of the mail list Mail List Setting The display style of the mail list can be set for Inbox and Outbox. ･ The 2-row display applies to Unsent messages, received SMS and sent SMS in the UIM regardless of this setting.
Page 268 INFORMATION ● When Auto play is set, a melody plays once when you display received mail, sent mail, mail template or Message R/F with melody attached. When more than one melody is attached, the melodies play one after another. Selecting the type of mail to display Display Type Only mail of the specified type is displayed.
Page 269 Press 1 to 3. INFORMATION ● In the view screen for received/sent/unsent mail in the miniSD memory card, press m and select Font size. ● The new font size is retained until it is changed. Menu 191 Setting operations for incoming mail Incoming Msg.
Page 270 INFORMATION ● Even when Show message is set, the receiving screen or reception result screen is not displayed and the mail ring tone or call indicator is not activated during a voice call, data communication, camera use, i- ppli α operation, or alarm sounding.
Page 271 Select Yes. Press a. Select Address field and enter a mail address (up to 50 one-byte characters). ･ When registering a mail address of i-mode terminal, enter the address including “@docomo.ne.jp”. If the address is “mobile phone number@docomo.ne.jp”, omit “@docomo.ne.jp”. ･...
Page 272 Select the text entry field and enter a message (up to 500 one-byte or 250 two-byte characters). ■ Copying and pasting text from chat mail log a Place the cursor at the chat mail to copy text, press m6, and specify the range. Specifying the range ☛P448 ･...
Page 273 Place the cursor at the mail to display as chat mail in the received mail list and press m75. In the received mail view screen, press m33. ･･ If the sender address of the selected mail is not registered as a chat member, a confirmation screen is displayed asking whether to register the sender address.
Page 274 Press m9 on the chat mail screen and select Yes. Editing chat members You can edit chat member information, add and delete members. The information on registered members can be checked and all registered members can be replaced. Press a3 on the stand-by display. ･...
Page 275 Quitting chat mail Press f or c on the chat mail screen. Select No. Chat mail quits. The previous chat mail is displayed next time chat mail is started. ･ When Yes is selected, all chat mail is deleted. In this case, the chat mail in Inbox or Outbox is also deleted except for protected mail.
Page 276 Using SMS (Short Message Service) Menu 171 Composing and sending SMS Compose SMS Compose and send SMS messages. SMS can be saved without sending. Maximum number of sent/unsent messages that can be saved ☛P39 ･･ If you use one-byte katakana and pictograms, the receiver may not be able to display them correctly. ･...
Page 277 INFORMATION ● You can use fixed phrases to enter face marks, greetings and replies in the message. ● Characters cannot be decorated. ● Depending on signal conditions, characters may not be displayed correctly at the receiver side ● The font type and whether to receive the delivered report are set in SMS Setting beforehand. You can also change the settings for the delivered report and storage period in the SMS Center while composing SMS.
Page 278 Press f while receiving the message to stop reception. ･･ When FOMA terminal is closed, the reception status such as SMS received appears on the sub-display. The sender’s phone number or name of the last message also appears. When Hide caller’s info is set in Sub-display Info Setting, no phone number or name will appear.
Page 279 Menu 162 Checking for SMS Check SMS You can make inquiry for any SMS delivered while FOMA terminal was out of service area or turned off. ･ Depending on signal condition, you may not be able to perform Check SMS. Press a62 on the stand-by display. If the SMS Center stores any messages, they are received.
Page 280 Saving SMS to the UIM Save SMS to UIM You can move or copy sent and received SMS from FOMA terminal to the UIM. Moving/copying SMS to the UIM Maximum number of messages that can be saved in the UIM ☛P39 ･...
Page 281 Menu 172 / Menu 173 Displaying SMS in the UIM Example Displaying received SMS Press a72 on the stand-by display. Received SMS is displayed in 2 rows in the received SMS (UIM) list screen. The received date/time and the sender or receiver are displayed in the first row, and the beginning of the message or Delivered report is in the second row.
Page 282 Place the cursor at the SMS message to move and press m31. ■ Moving selected messages a Press m32 and select messages. Press o to select or cancel a message, and press m to select or cancel all. ･ b Press p. ■...
Page 283 MEMO...
Page 284 i- α ppli i-αppli ......................282 Downloading i-αppli from sites ..............284 Starting i-αppli ..................... 286 Starting i-αppli with One-touch Button ..... One-touch Button 292 Starting i-αppli with i-αppli Shortcut ......i-αppli Shortcut 292 Automatically starting i-αppli ..............293 Starting i-αppli from a site or mail ........... i-αppli To 294 Operating i-αppli Stand-by Display ....
Page 285: I-Αppli
ppli α Downloading i- ppli software from sites allows more convenient use of a FOMA terminal α compatible with i-mode (hereinafter called as i-mode terminal). For example, various games can be downloaded to the i-mode terminal for amusement and i- ppli for stock price information can α...
Page 286 Using saved data Some i- ppli DX allows viewing, registering and operating of saved data such as messages, redials, α received calls and ring alerts in addition to the saved data available with standard i- ppli (phonebook α entries, bookmarks, schedules, images and icons). The following operations can be performed using saved data: ･...
Page 287: Downloading I-Αppli From Sites
■ Infrared communication The data can be exchanged with the devices that are provided with the infrared communication function from i- ppli. It allows enhanced use by interacting with devices provided with the infrared α communication function. ☛P300 ･ This function is available with i- ppli supporting infrared communication.
Page 288 ･ Some items may not be available for setting or operation setting screens may not be displayed depending on i- ppli. α Press p and select Yes. The downloaded i- ppli starts. α ･ Select No to return to the site screen. INFORMATION ●...
Page 289: Starting I-Αppli
Menu 31 Starting i- ppli α Hold down d for over a second on the stand-by display. Select a folder. : No i- ppli : i- ppli present α α Select an i- ppli application to start. α ：Normal i- ppli ：i- ppli DX...
Page 290 ● Using i- ppli to start another specified i- ppli allows use of i- ppli without returning to the software list. If α α α no i- ppli to be started is set, selection of i- ppli is required. If i- ppli to be started is set but not on the α...
Page 291 Select each item to set. ･ You cannot select the item not supported by the i- ppli. α ：Used to set whether to set i- ppli which supports the i- ppli stand-by α ppli display α α display as your stand-by display. Set NW transmission during α...
Page 292 Setting the lighting and vibrator during i- ppli running α Light/Vibrate Setting Setting display light ･ The i- ppli stand-by display light operation depends on the settings in Display Light Setting for the α display. ･ While Driving Mode is on, the light while i- ppli is running does not operate even if Use software setting α...
Page 293 くまくるん for D (Bear Puzzle for D) This is a puzzle game in which you can enjoy the faces of cute bears. “Kuru-Kuma” bear balls, which are arranged randomly, should be rearranged so that their colors and numbers meet the specified patterns. ･...
Page 294 珍さんと一緒トランプ＆占い (Mr. Chin’s Cards & Fortune-Telling) This is a set of card games in which you can play with unique characters, such as “Chin-san” Panda. You can enjoy a fortunetelling game in addition to three 大富豪ページワンポー card games: (The Rich and Poor), (Page One), and カー...
Page 295: Starting I-Αppli With One-Touch Button
■ Help function When you press o to select Help and then select Yes, FOMA terminal is connected to a site where a Help page can be displayed. For more detailed usages such as item selection, price input, etc., see the Help page.
Page 296 Automatically starting i- ppli α Collective setting for auto starting is made for all i- ppli which different conditions are set to. α ･ The date and time setting is required to start i- ppli automatically. α Specifying whether to start automatically Auto Start ･...
Page 297: Starting I-Αppli From A Site Or Mail
INFORMATION ● Even when auto starting is set, i- ppli is not started if the time of activation arrives in one of the following α situations. If i- ppli is not started for the following reasons (except for the ones marked with * α...
Page 298: Operating I-Αppli Stand-By Display
INFORMATION ● If the i- ppli you attempt to start with i- ppli To is not saved in FOMA terminal, the message that there is α α no specified i- ppli is displayed and i- ppli cannot be started. Note that some i- ppli may start just after α...
Page 299: Managing I-Αppli
Operate i- ppli. α Ending i- ppli to return to the i- ppli stand-by display α α Press f during operating i-αppli. Select Ended. ppli is ended and the i- ppli stand-by display is activated. The icon at the top of the screen α...
Page 300 Creating/deleting folders Folders can be created to sort out i- ppli by the category. Also, the order of folders can be changed. α Creating folders ･ Up to 20 folders can be created. Hold down d for over a second on the stand-by display. Press m4.
Page 301 ppli to protect and press m31. Place the cursor at i- α ppli is protected and is indicated on the software list. α ppli to cancel the protection and press m31. ･ To cancel, place the cursor at i- α ■...
Page 302 Moving i- ppli to another folder α Hold down d for over a second on the stand-by display and select a folder. ppli to move and press m41. Place the cursor at i- α ■ Moving the selected items a Press m42 and select i- ppli.
Page 303: Using Various Functions From I-Αppli
Using various functions from i- ppli α ･ Downloading i- ppli that supports individual function beforehand is required. α Making calls from i- ppli α Select setting items for Customized Call and set call conditions. Setting for Customized Call ☛P58 ･...
Page 304 i-channel i-channel ......................302 Displaying i-channel..............Channel List 304 Changing i-channel settings........Stand-by Telop Setting 304...
Page 305 i-channel i-channel is a service in which DoCoMo or IP (Information service provider) delivers graphical information such as news and weather information to i-channel-compatible terminals. Users can receive information regularly, and read latest information as it appears on the stand-by display as tickers in the channel list by pressing c (Displaying the channel list ☛P304).
Page 306 i-mode terminal i-mode Center IP (Information service provider) Basic channel info Optional channel info i-channel is a pay service for which subscription is required. (You need i-mode sign-up when you use this service.) Operating i-channel ☛P304 ･･ Compatible device: 701i Series Trial channel With our free Trial channel, Basic channel is available over the fixed period of time for i-mode subscribers having an i-channel compatible terminal who have never singed up for i-channel for the...
Page 307 Menu 281 Displaying i-channel Channel List Press c on the stand-by display. Press d81 when video/i-motion or i- ･ ppli is set as the stand-by display. (i-channel α cannot be displayed even if c is pressed.) Select the information to display. Confirm the information.
Page 308 Displaying/Editing/ Managing Data Making full use of image Displaying images ..............My Picture 306 Editing still images ..................309 Setting the operating conditions of images ........ Settings 316 Making full use of video/i-motion Playing video/i-motion ..............i-motion 316 Editing video/i-motion .................. 320 Setting the operating conditions of video/i-motion ....
Page 309: Displaying Images
Making full use of image Menu 51 Displaying images My Picture Displays images saved in My Picture (Image) of Data Box in FOMA terminal. Press u 1 on the stand-by display. Select a folder. The following images are stored in each folder: ：Images shot by Camera Camera ：Images downloaded from a site, i-mode Mail or i-...
Page 310 ■ Sending the image via mail a Place the cursor at the image to send and press a. The mail composition screen is displayed with the selected image attached. ･ When the file size of still image is under 9,000 bytes, a confirmation screen is displayed asking whether to paste in the text field.
Page 311 ■ Setting as video-phone call image, substitute image or on-hold image a Press 5 and press 1 to 6. ･ Images whose size exceeds 176 x 144 and images unavailable for output from FOMA terminal cannot be set as substitute image, answer machine image, response hold image and on-hold image.
Page 312 Editing still images Edit still images saved in Image (My Picture). The editing items and contents are as follows: Editing items Description Maximum image size editable (dots)* Changes the size. 1224 x 1632 Change size (352 x 288 for zoom in/out) Clip Clips to any size.
Page 313 INFORMATION ● Even when Scale down image is set to Yes in Settings, the image is displayed at same magnification in case of Paste stamp, Paste text, Cut or Change size. ● The result of editing depends on the still image type or method of editing. ●...
Page 314 Clip the image. ■ Clipping to the specified size a Press 1 to 8 and press O to adjust the clipping frame position. Each time you press p, horizontal and ･ vertical size of the clipping frame are switched. Each time you press t, clipping size is ･...
Page 315 ■ Changing tone to monotone or sepia a Press 2 or 3. The tone is modified and the still image edit screen reappears. Applying special effects Press 4 on the edit menu screen. Select the type of effect. The effect is applied to the still image and the still image edit screen reappears. ：Softens the image.
Page 316 Frames set by default ･ If a frame registered by default is deleted, it can be downloaded from the i-mode site, “My D-style”. ☛P289 ■ Size for stand-by (240 x 320) ■ QCIF size (176 x 144) Pasting stamps Press 7 on the edit menu screen. The smaller size stamps than the still image being edited are listed.
Page 317 Press p. The still image edit screen reappears. Stamps set by default Pasting characters Paste Text Press 8 on the edit menu screen. Select each item to set. ：Enters the text (up to 40 one-byte or 20 two-byte characters). Text ：Sets the text type.
Page 318 Press O to place at the color to cut and press o. The section with the close color to the position of is cut out. ･ You can cut another area continuously. Press p. The still image edit screen reappears. Limiting file size for saving Limit the file size to a size below 9,000 bytes, 100 Kbytes or 500 Kbytes for saving.
Page 319: Setting The Operating Conditions Of Images
Adjust the level of the effect and press o. Press & to increase or decrease by 1 level. ･ Press a to maximize and press t to minimize. ･ Press o and select Save. Adjusted still image is saved in the same folder as a new still image. ･...
Page 320 Select a folder. The following video/i-motion files are saved in each folder: ：Videos recorded with Movie Camera or the sounds Camera recorded with Sound Recorder ：i-motion downloaded from sites or i-motion Mail mode Preinstalled ：Videos preinstalled by default Data transfer ：Video/i-motion moved/copied from the miniSD memory card or received by data communication ：Video/i-motion moved from another folder Album...
Page 321 Press o and replay video/i-motion. a Play volume: Indicates current volume. b Playing status ：in play ：in stop ：in pause c File types ：only sound ：sound + image ：only text ：image + text ：only image ：sound + image + text ：sound + text d Enlargement/reduction ：enlarged ：reduced No icon: in same size ･...
Page 322 When replay restrictions for i-motion are set A confirmation screen is displayed before playback starts. Replay restriction types and contents to check are as follows: Restriction Status Description Restriction on Playback counts Available to play x (x/all) time(s). Play? is displayed. To play, select Yes; the number of remain to stop, select No.
Page 323: Playing Video/I-Motion
■ Updating phonebook data saved already a Press 3 and select phonebook data to update. ･ If video/i-motion has already been set, it is replaced by the selected video/i-motion. ■ Setting as Movie ringtone a Press 4 and press 1 to 6. ■...
Page 324 Press m3 at any position during playback. To redo the operation of clipping, press m and select Yes. ･ Check the image and press p. The still image is captured and saved in Camera folder of My Picture (Image). To capture continuously, press o, resume a play and repeat Step 3 to 4. ･...
Page 325 ■ Setting the limit of clipping size ･ Setting is available only when the original file size exceeds 290 Kbytes. a Press m in the screen before pressing o (start position). b Select Msg attach: Small (290 Kbytes), Msg attach: Large (490 Kbytes) or No settings (original file size).
Page 326 Enter a display name (up to 36 characters regardless of one- or two-byte) and press p. The clipped video/i-motion is saved as new data in the same folder as the original video/i-motion. ■ Playing video/i-motion a Press t. ■ Sending the video/i-motion via mail a Press a.
Page 327 Press o to start playing and press o on the ticker inserting position. Playing is not interrupted. Each time you press o, the inserting position of tickers is set. ･ When replay is started, the first inserting position is set at the beginning. Press p to end the setting.
Page 328: Setting The Operating Conditions Of Video/I-Motion
Enter a display name (up to 36 characters regardless of one- or two-byte) and press p. The video/i-motion with tickers is saved as new data in the same folder as the original video/i-motion. ■ Playing video/i-motion a Press t. ■ Sending the video/i-motion via mail a Press a.
Page 329: Playing Melodies
Place the cursor at the melody to send and press a. Melody list ･ If the receiver is other than FOMA D701i, D901i or D901iS, received melody may not be correctly played. Melodies that can be attached to mail ☛P229 ･...
Page 330: Setting The Operating Conditions Of Melodies
Setting melodies for ring tone/on-hold tone Press u3 on the stand-by display and select a folder. Place the cursor at the melody to set and press m2. Select the type of sound to set. ■ Setting as ring tone for voice call, mail, chat mail, Message R/F or video-phone call, or on hold-tone a Press 1 to 7.
Page 331: Before Using The Minisd Memory Card
■ Selecting the background image from Image (My Picture) a Select Play background field and press 2. b Select the select image field. c Select a folder and select an image to be set as background. Place the cursor at the image and press p to display it. Press o to set. ･...
Page 332: Use The Minisd Memory Card
･ The miniSD memory card cannot be used while All Lock, PIM Lock or Lock on Close is on. ･ In the miniSD memory card in which the data has been written and protected with other devices such as a PC, the data cannot be saved, deleted and formatted. ･...
Page 333: Camera
■ Inserting to and displaying on a PC When data is moved/copied to the miniSD memory card from FOMA terminal or still images or videos shot with the camera are saved directly to the miniSD memory card, the folder compatible with the file is automatically created in the miniSD memory card.
Page 334: Inserting/Removing The Minisd Memory Card
Data of still images/videos/melodies available in the miniSD memory card Operation Copy/move to Copy/move to Attach to Display miniSD FOMA mail* contents File format memory card terminal Still image in JPEG format File size Unlimited 500 KB 500 KB 1.5 MB Image size Unlimited 1224 x 1632 Unlimited...
Page 335: Exchanging The Data Between Foma Terminal And The Minisd Memory Card
Removing the miniSD memory card a Open the miniSD memory card slot cover. b Push the miniSD memory card lightly, and leave your finger. The miniSD memory card pops out a little. c Remove the miniSD memory card slowly. Pull it straight out. d Close the miniSD memory card slot cover.
Page 336 Copying/moving data from FOMA terminal to the miniSD memory card ･ The data prohibited from outputting from FOMA terminal cannot be copied/moved (except for the data with file restriction set to File restricted on FOMA terminal or the data in the Data transfer folder). ･...
Page 337 Copying/moving data from the miniSD memory card to FOMA terminal The maximum number of saved items in FOMA terminal ☛P39 ･ Copying/moving data in Data Box to FOMA terminal Press m661 on the stand-by display and press 1 to 4. Select a folder.
Page 338: Displaying Data In The Minisd Memory Card
INFORMATION ● Operation is available from the phonebook list, schedule list, mail list or Bookmark list as well. In the phonebook list, press m and select IrDA/miniSD/UIM → Backup to miniSD. ･･ In the schedule day view screen, press m and select IrDA/miniSD → Backup to SD card. In received mail list, sent mail list or unsent mail list, press m and select Move/Copy →...
Page 339 ■ Displaying detail information a Place the cursor at the data to display detail information and press m2. ■ Deleting one item a Place the cursor at the data to delete and press m41. b Select Yes. ■ Deleting multiple items a Press m42 and select data.
Page 340: Managing The Minisd Memory Card
Place the cursor at the data to check. ■ Deleting one item a Place the cursor at the data to delete and press m21. b Select Yes. ■ Deleting multiple items a Press m22 and select data. Press o to select or cancel an item and press m to select or cancel all. ･...
Page 341 Press m66 on the stand-by display and press p. Select the format method. ：Only the data management area in the miniSD memory card is formatted. Quick format Performing the minimum necessary processing is a method to shorten the format period. The saved data are all deleted. Use this method only when the miniSD memory card has been formatted and has no problem.
Page 342: Using The Album
Select Yes. Managing various data Using the album You can create albums (folders) in Image (My Picture), i-motion or Melody of Data Box in FOMA terminal and sort out the data. The album data in i-motion and Melody can be replayed at one time.
Page 343 Place the cursor at the data to move and press m511. ■ Moving selected items a Press m512 and select data. Press o to select or cancel an item and press m to select or cancel all. ･ Each time you press t, thumbnail display and title display are switched. ･...
Page 344 Example Copying data in Image (My Picture) Press u1 on the stand-by display and select a folder. Place the cursor at the data to copy and press m53. The copied data are saved in the same folder as the original data. INFORMATION ●...
Page 345: Checking/Editing Detail Information Of The Data
Checking/editing detail information of the data View/Edit Detail Info Check detail information. The contents of some information can be changed. Checking detail information Example Displaying the image detail information Press u1 on the stand-by display and select a folder. Place the cursor at the images to check detail information and press m31. Press p to change a part of detail information.
Page 346 Displayed Video/ Image Melody Description of display/change i-motion item File When you send data to the other mobile phone via mail attachment, ● ● ● you can set whether to restrict sending data to the other mobile restriction phone from the received party’s mobile phone. ･...
Page 347: Sorting Data
Deleting data ･ Data saved in Preinstalled folder of Image (My Picture), i-motion or Melody cannot be deleted. Example Deleting data of Image (My Picture) Press u1 on the stand-by display and select a folder. Place the cursor at the data to delete and press m61. ■...
Page 348: Infrared Communication
Making full use of infrared communication Infrared communication You can send and receive data to/from other FOMA terminals, mobile phones or PCs with an infrared communication function. Also, by using the i- ppli compatible with infrared communication, you can link α...
Page 349: Sending The Data By Infrared Communication
Sending the data by infrared communication Send Ir Data You can send data by selecting each item to send one at a time or by sending all items of the specified function data at once. The following data are available for sending: Data type Remarks ･...
Page 350: Receiving Data By Infrared Communication
Sending all data items You can send all the data of phonebook, schedule, mail, notes and bookmark via infrared communication. ･ If you send all the data, the same authentication password between sender and receiver must be entered. Decide a 4-digit authentication password among 0000 to 9999 in advance. Make your party’s FOMA terminal ready to receive.
Page 351 Data type Storage after receiving Order of saving data Video/i-motion Data transfer folder of i-motion Top of the list Melody Data transfer folder of Melody Top of the list Own Number Phonebook Smallest free phoonebook No. *1 Receiving all is enabled. ･...
Page 352 ･ If you select Confirm & overwrite, go to Step 4. Select Yes and enter the terminal security code. Enter the 4-digit authentication password. ･ The entered authentication password is masked with “ ＊ ”. Select Yes. Receiving stand-by condition is activated. Send all the data on the sender side.
Page 353: Activating Infrared Communication Mode
■ Selecting multiple items a Enter the terminal security code. b Select Add to add or select Overwrite to overwrite. ･ Note that the original data in FOMA terminal are all deleted by selecting Overwrite and replaced by new data. INFORMATION ●...
Page 354 Remote control operation Perform remote control operation with the infrared data port of FOMA terminal pointed at the infrared receiver of the supported device used (operating procedure differs Infrared receiver depending on i- ppli). Angle for remote control is 15 degrees α...
Page 355 Making the initial setting Make the initial setting according to the following procedures: Register the basic information. a Make the setting of 視聴地域の郵便番号桁 )(a postal code number 生まれた年 (the birth year) and 性別 of the region; 7 digits), (the distinction of sex).
Page 356 Reading the main screen and operation Current time Date/Time slot Press & to change. Program table Press % to select a channel. Next program exists. Displayed in case multiple programs Advertisement exist in the time slot displayed. Press Information is displayed by &...
Page 357: Setting Operations For Data Transfer
Setting operations for data transfer Data Transfer Setting Set operations for data transfer by infrared communication and USB connection. Default End alert: OFF Auto Authentication: OFF Ph. book image sending: ON Press m653 on the stand-by display. Select each item to set. ：Specifies whether to enable communication end tone at the end of communication.
Page 358 e Counter ：During stand-by for recording Indicates the approximate maximum time of sounds that can be saved in FOMA terminal or the miniSD memory card at this time. During recording/pause Indicates the approximate elapsed/remaining time (duration up to the recording stop). f Quality ：Indicates the quality of the sound to be saved.
Page 359 Recording the sound ･ Record the sound in as quiet place as possible where environmental noise is little. ･ Even when Silent is set for Ring Volume or Silent Mode is active, the recording confirmation sound (shutter sound) is heard. Press m63 on the stand-by display.
Page 360: Recording Sound With Sound Recorder
■ Changing the title a Press m31 and enter the title (up to 31 characters regardless of one- or two- byte) and press p. ･ Changed title is valid after saving the sound. ■ Inserting a ticker a Press m32 and select Yes. The recorded sound is saved in FOMA terminal and the ticker setting screen is displayed.
Page 361 Restricting the file size Press & on the recording screen and place the cursor at the size restriction icon. You can also press 7 to select the icon of size restrictions. ･ Icon of size restrictions Press % to switch the icon and press o. Msg attachment (S) ：Restricts the file size to 290 Kbytes.
Page 362 Other Convenient Functions Multiaccess ................Multiaccess 360 Multitask ..................Multitask 362 Setting to turn power on/off automatically at specified time ..................Auto Power ON/OFF 364 Ringing alarms at the set time ..........Alarm Clock 365 Setting to turn power ON automatically at the time specified for the alarm ..................
Page 363 Multiaccess Multiaccess Multiaccess is a function that three functions (voice call, packet communication and SMS) can be used at the same time. ･ The icon for the function in progress is indicated on the task bar. While executing the function, press b to display New Task menu or Switch Task menu, and you can ･...
Page 364 Performing other communication during communication Another communication can be performed at the same time without interrupting the communication under connection. Example Connecting to i-mode during a voice call Press b during a voice call. New Task menu appears. ･ If you switch the call to use the speakerphone function on the talking screen, the site screen can be viewed while talking.
Page 365 Press n. ･ Select Phonebook & Logs from New Task menu to call from the phonebook, received call history or redial data. Enter the phone number and press n. To end site display, press f in the site screen and select Yes. ･...
Page 366 INFORMATION ● The function available using Multitask may be restricted depending on the status of activating or lock setting. During a video-phone call, infrared communication, updating software/pattern data (Virus Scan Function), operation by Multitask is invalid. ● If many functions are executed at once, for example, message arrives while video or animation is playing or Camera is operated, the movement displayed on the screen may not appear smooth or the sound may be disrupted during play.
Page 367 Exiting all running operations All functions are ended in Multitask at a time. Press bp during Multitask and select Yes. Setting to turn power on/off automatically at specified time Auto Power ON/OFF ･ The date and time setting is required. ･...
Page 368 Ringing alarms at the set time Alarm Clock This function announces the set time with an alarm or vibration. ･ The date and time setting is required. ･ア When Alarm Clock is on, defaults of settings are as follows; Time: 00:00, Repeat: None, Alarm sound: ラーム・アナログ時計...
Page 369 Press & to switch to Set others screen select each items to set. Vibrate alert ：Sets the vibration used at the alarm time. Lighting pattern ：Sets the lighting pattern of the call indicator for the alarm time. ･ When Sync melody or OFF is set, Lighting color cannot be set. Lighting color ：Sets the color of the call indicator shown at the alarm time.
Page 370 Setting to turn power ON automatically at the time specified for the alarm Alarm Auto Power ON Set to automatically turn the power on and an alarm or an alarm sound if the power is off when the date and time specified by the schedule or Alarm Clock arrives. Default OFF Press m855 on the stand-by display.
Page 371 ■ Specifying a particular day to display a Press m42 on the calendar screen. b Enter the year, month and day. The cursor is moved to the specified date. Press m41 to restore the current date display. ･ On Day View screen, press m52. Press m51 to restore the current date ･...
Page 372 ■ Canceling a Place the cursor at the day off to cancel and press m623. Press m624 to cancel all days off. ･ ■ Setting days off by specifying the day of the week a Press m63. b Press 1 to 7 to select a day of the week to set as a day off. ･...
Page 373 Select each item to set. (Item icon) ：Select an icon. ･ The selected icon is indicated on the schedule heading. Schedule (contents field) ：The description equivalent for the selected icon is displayed. Change the description as required (up to 200 one-byte or 100 two-byte characters).
Page 374 Press & to switch to Other settings screen and select each items to set. Repeat ：Press 1 to 6 to select the repeat setting for a schedule. ･ When you set a 31st day or February 29 in a leap year as the schedule starting date and Every month or Every year is selected in the repeat setting, the schedule repeating date becomes the last day of the same year/month without the specified date (that...
Page 375 When the set date and time arrives When the set time arrives, the schedule alarm screen appears and the alarm sounds. The date/time, schedule description and set image or video/i-motion appears on the schedule alarm screen. The alarm sounds at the ring alert volume set in Ring Volume setting. When Alert Lighting Setting is set, it operates according to the setting.
Page 376 Checking the recorded schedule data You can add, change and delete the schedule data from the displayed schedule screen. Hold down p for over a second on the stand-by display and select the recorded schedule day to check. Press & to switch dates on the day view screen. ･...
Page 377 Composing mail from schedules Schedules can be sent as an i-mode Mail message. ･ The number of schedule items that can be sent depends on the screen operated. ○ : Available × : Unavailable Screen operated Calendar screen Day view screen Details screen Sending type Send selected item...
Page 378 Press m3. Press 1 to 4. To delete all schedules, press 4 and enter the terminal security code. However, even if ･ deleted without setting Secret Mode on, schedules with Secret Attribute set are not deleted. To delete the long-term schedule including the selected day, press 2 or 3 and select ･...
Page 379 ■ Displaying a site a Place the cursor at a member and press m6. INFORMATION ● To use the second or subsequent phone number or mail address registered in the phonebook data, select a member from the member list screen to display the phonebook details screen (Phone/Mail). You can make a voice/video-phone call or compose i-mode Mail by placing the cursor at the phone number or mail address (☛P105).
Page 380 Registering often-used functions Custom Menu Create your original menu (custom menu) by registering the functions you often use or the phonebook data of the other party you frequently reach in addition to the menu that is previously registered (normal menu) to execute the function quickly or make a call easily. Reading a template ･...
Page 381 ■ Registering persons ･ If Secret Attribute is set for the phonebook data, it is not displayed unless Secret Mode is set. ･ When the phonebook data that contains a Flash movie or video/i-motion is registered in the custom menu, a pre-registered character icon is displayed on the menu screen instead of the Flash movie or video/i-motion.
Page 382 INFORMATION ● You can change the order of the registered items or icons. ☛P380 Using the custom menu You can execute functions registered in the custom menu, and also make a call to a person registered in it. ･ Shortcut operations are also available while the custom menu is displayed. The method of selecting numbers for shortcut operations can be selected between the same method as for the normal menu and the method that uses dial keys corresponding to the positions of custom menu items.
Page 383 INFORMATION ● If Secret Attribute is set for a person in the phonebook data, the name of the person is displayed as “ ＊＊＊ ” unless Secret Mode is set. is indicated. ● Persons cannot be selected when PIM Lock or Privacy Mode is on (Authorized access set for Phonebook & Logs).
Page 384 Menu 47 Recording your own name and mail address Own Number Default UIM settings Press m0 on the stand-by display. ･ As Own Number, the phone number of the UIM inserted into FOMA terminal is displayed. Press p. Enter the terminal security code and set the name and mail address. ･...
Page 385 Press o and enter the terminal security code. ･ The content that has already been set is displayed. When the data is long, only a part of it is displayed. Press p to display ･ the name, reading, the first phone number and the first mail address. ■...
Page 386 Menu 463 Recording your own voice in stand-by Press j3 on the stand-by display. After about 3 seconds, a beep is heard and recording starts. ･ When the remaining time becomes about 5 seconds, rapid beeps are heard to warn that the end of recording is approaching.
Page 387 INFORMATION ● For Talking Voice Memo, placing the cursor at a party in the list followed by pressing n or t makes a voice call or video-phone call respectively. From the submenu, Customized Call can be used to make voice or vide-phone calls by specifying to show/hide the caller ID or to make video-phone calls by specifying data rate.
Page 388 Last call cost: Data ：The cost of the last data communication ：The total cost of voice/video-phone calls and data communication Total calls cost ･ If the total calls cost was reset in the past, the total calls cost made up to the present after the reset is displayed.
Page 389 Setting to notify the limit of call cost Call Cost Limit Set the maximum limit of call cost and, when the total call cost exceeds the set amount, it is notified with an alarm or icon. ･ The amount shown in Call Cost Limit is only an estimate and should not be regarded as the actual amount for billing.
Page 390 Using Calculator Calculator You can perform addition, subtraction, multiplication and division ( ＋ , − , × , ÷ ) on your FOMA terminal. ･ Up to 8 digits can be entered. ･ You can use the calculator from the entry fields for schedules and notes, and paste the result of a calculation into the entry field of the original screen.
Page 391 Enter the note data in Note content field (up to 600 one-byte or 300 two-byte characters). ■ Inputting values calculated with Calculator a Press m82 on the character entry screen. b Make a calculation and press o. Select Select in Catg icons field and select an icon. Selected icon Name of icon Press p.
Page 392 Saving schedule from notes Date To ･ When the message text contains schedule description in the Date To format, copying the text to Notepad allows saving it as schedule. Press m72 on the stand-by display. Select the note written in Date To format. Select the description written in Date To format, and save it as schedule.
Page 393 ･ When the cord of the flat type earphone/microphone set with switch nears the antenna, a noise may be emitted. ･ Insert the plug firmly. If it is not inserted completely, there may be audio disruption. Making calls by pressing the switch By registering a phone number to the phonebook No.
Page 394 Registering the receivers for calling with earphone/microphone Headset Quick Dial Set the receiver to make a call using a flat type earphone/microphone set with switch by assigning the phonebook No. Default OFF Press m8643 on the stand-by display. Select Headset quick-dial field and press 1. To cancel the setting, press 2 and go to Step 5.
Page 395 INFORMATION ● The same time period cannot be set for both the delayed time for Auto Answer and the response time for Answer Machine. ● When a video-phone call has been answered by Auto Answer, the substitute image set in Image Setting is sent and a video-phone call is automatically started.
Page 396 Search method ：Sets how to retrieve a network. ･ If you select Auto select NW, you cannot set Manual select. Manual select ：Selects a service provider. ･ A service provider other than DoCoMo cannot be selected for manual selection (as of August 2005).
Page 397 Press p and select Yes. INFORMATION ● Menu Setting is not reset by this function, but if Custom1 or Custom2 of the type of icons is changed, they return to the default status. ● In case of resetting i-Mode Setting, the information of i-channel is not displayed on the stand-by ticker and sub-display.
Page 398 Press m846 on the stand-by display. Enter the terminal security code and select Yes. Data are deleted collectively during restart. INFORMATION ● The following data are not deleted and cannot be reset to the default: ･ The data saved, registered or set in the UIM or the miniSD memory card ･...
Page 399 MEMO...
Page 400 Network Services Network services available using FOMA terminal ..Network Service 398 Using Voice Mail Service ............Voice Mail 398 Using Call Waiting Service ............ Call Waiting 400 Using Call Forwarding Service ........Call Forwarding 401 Using Nuisance Call Blocking Service ....Nuisance Call Blocking 403 Using Caller ID Request Service ........
Page 401 Network services available using FOMA Using Voice Mail Service Voice Mail terminal Network Service Voice Mail Service stores voice messages when FOMA terminal is turned off or in a location where This manual shows an overview of each network radio waves are hard to reach, or when you service.
Page 402 ● When a new call arrives while you are talking (or Basic flow of Voice Mail Service using packet communication), you can choose to Activate the service Step transfer the call to the Voice Mail Service Center. Forwarding the incoming call manually ☛P63 The caller leaves a voice message* Step ●...
Page 403 ･ Notification is made despite the settings of all Setting ring tone to sound when new voice rejection of SMS. messages arrive Notification ･ It does not cost you for the settings and You can set an alert tone to sound when the caller notification (SMS reception).
Page 404 b Press f when you finish talking to the ･ When you make a call to 4-digit phone number for other party. setting the network services, including 1411 This ends the call and the ring tone sounds. (activating Voice Mail Service) and 1420 Press n to switch back to the other party ･...
Page 405 About Call Forwarding Service fees ･ Only 1 forwarding destination can be set. ･ When Call Forwarding Service is on, you are Call charge still able to make and receive calls. Call Forwarding ･ When there is a call if Forwarding Phone Forwarding Caller ←→...
Page 406 Press m934 on the stand-by INFORMATION display. ● When FOMA terminal is outside the service area or is turned off, calls are automatically transferred Select Yes. without the ring tone sounding. Also in this case, ･ To cancel the handling by Voice Mail, select No. Call Forwarding Service subscriber is charged for the call from the forwarding source to destination.
Page 407 ● The following table lists the relationships Using Caller ID Request Service between incoming calls received with Nuisance Caller ID Request Call Blocking Service activated and other For an incoming call without the caller ID, this services. service plays a guidance requesting the caller to Handling of incoming calls to be Service notify the caller ID information.
Page 408 ● When a User unsent voice call is received while INFORMATION Caller ID Request Service is activated, no ring tone ● The mova terminal is available for the current FOMA sounds and the call is not recorded on the received i-mode service with some exceptions.
Page 409 Press 1 to 4. : You can make a call during a talk or Answer Using Service Dialing Number Service Dialing Number 64K data communication, and also you can forward the call to the Calls are made to DoCoMo for Repairs or destination registered in Voice Mail DoCoMo for General Inquiries.
Page 410 Place the cursor at the number to record and press p. Setting Remote Control Remote Control Press & to switch ･ You can access such services as Voice Mail to the next or Service and Call Forwarding Service from touch- previous page.
Page 411 Press 1 to 8. Press & to switch ･ to the next or previous page. ■ Changing registered contents a Select a number that is already in use. Select USSD code field and enter the USSD code provided by DoCoMo. Select Reply message field and enter the message (up to 20 one-byte or 10 two-byte characters).
Page 412 Data Communication Data communication ..................410 Flow of setup for data communication ............411 Connecting PC to FOMA terminal ............... 412 Installation of the communication configuration file (driver) ....413 Communicating using FOMA PC configuration software ......414 Communicating without using FOMA PC configuration software ... 423 AT command ....................
Page 413: Data Communication
Usage precautions Data communication Internet service provider usage charges The data communication and connection modes available from FOMA terminal and hints on use When using the Internet from PC, usage charge to are explained. your Internet service provider (herein after called as ･...
Page 414: Flow Of Setup For Data Communication
■ Operating environment for the FirstPass PC software Flow of setup for data communication Item Requirements The setup work needed to connect FOMA PC/AT compatible computer terminal to a PC to perform packet or 64K data The Japanese version of Windows 98SE, Me, 2000, XP communication is as follows: Memory...
Page 415: Connecting Pc To Foma Terminal
Selecting PC operation during USB connection Checking operating environment USB Mode Setting Use the communication configuration file and the Specify whether to perform data communication via FOMA PC configuration software in the following PC or operate the data of the miniSD memory card operating environments: ･...
Page 416: Installation Of The Communication Configuration File (Driver)
名前 (Name) and click OK. はい Click (Yes). A screen requesting to connect FOMA D701i to a PC is displayed. Connect FOMA terminal to a PC. USB connector A progress screen for installation is displayed and automatically completed.
Page 417: Communicating Using Foma Pc Configuration Software
スタート設定コント (Setting) and INFORMATION ロールパネルシステ . Then double-click ム ● When the installation fails or FOMA D701i USB is icon. ス not displayed on the screen of Step 2, click ハードウェアデ Click (Hardware) tab and タート...
Page 418 設定 ■ Dialup connection (APN) setup W-TCP (W-TCP setup) resides in the task tray after the setup. ☛P421 This function performs dialup connection (APN) setup required for packet communication. ･ Residing in task tray is the recommended Unlike 64K data communication, phone numbers setting for optimum control of “W-TCP cannot be used as a dialup connection for FOMA communication”...
Page 419 『』への接続 Select (mopera U mopera U Setting packet communication by easy setup 『』への接続 connection) or mopera 次へ (mopera connection) and click Example For Windows XP ･ Mopera U is an optional service to be charged スタートすべてのプログラム ...
Page 420 次へ Click Click OK. ･ユーザー名 The entry of a (User name) or The PC must be rebooted for the changes to take パスワードはい (Password) is not required. effect. Click when a window prompts you to ･ When the OS is Windows XP or 2000, select reboot the PC.
Page 421 最適化を行う Set dialup connection (APN). Check that is selected and 次へ click By default, “mopera.ne.jp” is registered in cid1, and “mopera.net” for cid3. This optimizes the W-TCP setup required for The dialup connection (APN) must be registered packet communication. either at cid2 or at anything from cid4 to cid10. ･...
Page 422 ･ The following characters (one-byte) cannot be entered: ￥ / : ＊ ? ! <> ｜･モデムの選 Check that FOMA D701i is set for Click OK. 択 (Modem selection). Performing communication ☛P420 ･ Using other providers Using mopera U / mopera ☛P418...
Page 423 ■ Advanced setting (TCP/IP setting) Performing communication 詳細情報の設定アドレス Click to display IP ネームサーバー setting screens. When Starting communication set with the FOMA PC dialup information for the provider you configuration software and disconnection are subscribe to or the in-house LAN is required, explained here.
Page 424 For Windows XP INFORMATION ● FOMA terminal displays a connecting screen when System optimization can be performed for each you execute packet or 64K data communication. dialup connection. The following screens are displayed when a connection has been established: 設定ソフト Start FOMA PC and click W- (W-TCP setup).
Page 425 ■ Editing or correcting registered dialup Under Windows 2000, Me or 98 connections (APN) a Select the dialup connection (APN) from 設定ソフト Start FOMA PC and click W- 編集 the list and click (Edit). (W-TCP setup). ☛P416 設定 ■ Deleting registered dialup connection (APN) ■...
Page 426: Communicating Without Using Foma Pc Configuration Software
Windows 2000 P427 P429 ンの追加と削除 icon. Windows Me P430 P430 設定ソフ Select NTT DoCoMo FOMA PC Windows 98 P431 P431 ト (NTT DoCoMo FOMA PC configuration • For details settings, inquire your provider or network 変更と削除 software) and click administrator.
Page 427 For details ☛P438 Enter a fictional phone number (such as 0) for ■ When nothing is displayed even if AT command is entered 電話番号 , select FOMA D701i from 接続方 ATE1 法 (Connection procedure), and click OK. ･ For details ☛P436 ･...
Page 428 Dialup connection (APN) and ■ Setting to show/hide caller ID by dialup registration number (cid) network settings The dialup network settings can also be used The dialup communication (APN) for packet to append “186 (show)” or “184 (hide)” to the communication can be set for registration numbers dialup connection number.
Page 429 ワードの確認入力 is not required. Set each モデムー Select FOMA D701i (COMx) 次へ items as shown and click (Modem: FOMA D701i (COMx)* ) and click 次へ *1 COMx varies depending on the PC you use. Click 完了キャンセル Check the settings and click 名 ...
Page 430 Click OK. Setting for Windows 2000 Use the network connection wizard to set the dialup connection and TCP/IP protocol. Setting dialup connection スタートプログラムアクセサリ Click 通信ネットワークとダイヤルアップ接続ネットワークとダイヤルアップ接続 screen is displayed. Double-click 新しい接続の作成 icon. ネットワーク Click (Network) tab and 所在地情報...
Page 431 The Internet account connection information screen is displayed. アドレス Click (Address) tab and set each ･ If FOMA D701i is not set, set FOMA D701i. item as shown. Enter the number of dialup connection (one- 電話番号詳細設定 byte) in and click (Detailed settings).
Page 432 ･ If multiple modems are installed in the PC, モデムー接続 select FOMA D701i (COMx)* の方法電話 When the modem is changed, all items in 番号 is initialized. Enter the dialup connection phone number again in that case.
Page 433 Select the created dialup connection icon Double-click (New connection) ファイルプロパティ . and click icon. 接続名 Enter any connection name in 次へ click ･モデムの選 Check that FOMA D701i is set for 択 . If it is not set, set FOMA D701i.
Page 434 ティを使う (Use area code and dial properties). ･ When the dialup connection is mopera U / ･接続方法 Check that FOMA D701i is set for . If it ユーザー名パスワード mopera, the entry of is not set, set FOMA D701i.
Page 435: At Command
･サーバーの種類 Click (Server type) tab When the dialup connection is mopera U / ユーザー名パスワード mopera, the entry of and check the setting of each item. is not required. ･ダイヤルアップサーバーの種類イ to PPP: ンターネット , Windows NT Server, Windows 98 (PPP: Internet, Windows NT Server, Windows 98).
Page 436 AT commands and their parameters (numbers or symbols) must be entered on a single line. All the characters from the first character to the character just before must be entered on a single line. Up to 160 characters (including “AT”) can be entered in each line.
Page 437 ･ AT command that can be used via the FOMA D701i Modem Port is described in this list. : Indicates that you can return the command setting to the default with the AT&F command. : Indicates that you can store the command setting into your FOMA terminal with the AT&W command and restore it with the ATZ command.
Page 438 Command Description & Parameter AT ＊ DGPIR = n Specifies whether to notify the caller ID for packet communication. This specification is effective both for incoming and outgoing calls. n = 0: The APN is used as is when a packet communication is established. (default) n = 1: Adds “184”...
Page 439 Enter Display None Test None ATI [n] Shows the identification code. n = 0:Shows “NTT DoCoMo”. (when parameter omitted) n = 1:Shows FOMA terminal name. n = 2:Shows the version of FOMA terminal. ex. Enter ATI0 Display None Test None Switched the mode from the online command to the online data.
Page 440 Command Description & Parameter ATX [n] Specifies whether to detect busy tone and dial tone, and whether to display the communication speed. n = 0: Busy tone not detected, dial tone not detected, communication speed not displayed. (when parameter omitted) n = 1: Busy tone not detected, dial tone not detected, communication speed displayed.
Page 441 Operation performed when parameter is Disconnection reason list omitted AT + CGDCONT = ■ Packet communication Clears all <cid> settings. However, entry for Value Reason “<cid> = 1” and “<cid> = 3” is restored to the default APN is not present or is incorrect. setting.
Page 442 Operation performed when parameter is Parameter description omitted Only commands that require connection at 64 AT + CGEQMIN = kbps upload/384 kbps download can be set. The Clears all <cid> settings. contents are set by default for each cid. AT + CGEQMIN = <cid> <cid>: 1 to 10 By default, “mopera.ne.jp is set for cid1 and Returns the specified <cid>...
Page 443 INFORMATION ● When the ATV [n] command (☛P436 ) is set to “n=1”, the result code is displayed in the text display (default). When the command is set to “n=0”, the result code is displayed in the numeric display. ● To retain compatibility with a modem connected via conventional RS-232C, communication speed is displayed, but it differs from the actual connection speed because FOMA terminal is connected to the PC with a FOMA USB cable (optional).
Page 444 Character Entry Entering characters ..................442 Entering characters using 5-touch Input Method ................... 5-touch Input Method 443 Registering fixed phrases............Save Phrase 447 Copying/cutting and pasting characters ......Copy Character 448 Entering characters using codes ........ KUTEN Code Input 448 Registering frequently used words..........
Page 445 Full-screen entry Entering characters Place a cursor at the entry field and press o to display the full-screen entry area. FOMA terminal has many functions such as the Input mode phonebook and mail that require entering Available entry area: characters. Icon shows no further ･...
Page 446 Using to change modes Entering characters using 5-touch Input The input modes change each time n is pressed as follows: Method 5-touch Input Method Input mode Entering characters Kana/Kanji Conversion Example Entering “企業” in the phonebook Place the cursor at Enter name field and Alphabet Numeric* press o.
Page 447 ■ ■ Fixing hiragana without conversion Entering line feed Go to Step 4 after entering the hiragana. Move the cursor to the location to enter a line feed and press #. Press p. ･ Some entry fields may not permit a line feed. Press o.
Page 448 When there are no appropriate words, press p ･ INFORMATION to convert text by Kana/Kanji Conversion and ● You can enter symbols, pictograms, alphabetic predict conversion options vanish. characters, Greek characters, etc. by entering the readings in hiragana. ☛P460, P461 閉じる...
Page 449 Entering symbols and pictograms Quoting data to enter characters ･ Only available symbols are listed. You can enter characters by quoting phonebook ･ data, Own Number information, the result of Part of pictogram can be converted by entering “ えもじ...
Page 450 Press p. Quoting a result of calculation with Calculator ･ When you edit a registered fixed phrase, a ･ The result can be quoted only on the character confirmation screen is displayed. Select Yes to entry screen of Scheduler and Notepad. overwrite or No to cancel the operation.
Page 451 INFORMATION Copying/cutting and pasting characters ● On the entry screen for message, press m and Copy Character select Paste. ● When the type of the copied/cut characters does not Characters copied or cut from a character entry match with the character type used in the screen are pasted elsewhere.
Page 452 ■ Deleting words INFORMATION a Place the cursor at a word to delete and press m. ● Only words with a reading can be registered. b Select Delete. ● Readings that contain characters other than ･ To delete all, select Delete all. hiragana, prolonged sound, voiced sound or semi-voiced sound characters cannot be Select Word field, enter the word to...
Page 453 Example Entering “企業” in the phonebook Place the cursor at Enter name field and Setting input method Input Method Setting press o. Default Input method: 5-touch Input prediction: ON The character entry screen is displayed. Auto cursor: Normal ･ In English mode, the alphabet mode is displayed first.
Page 454 Appendix/Data Interchange/ Troubleshooting Menu list ......................452 List of dial keys and character assignments (5-touch Input Method) ..456 List of input slots and character assignments (Slot Input Method) ..457 List of fixed phrases ..................457 List of pictograms and symbols ..............459 List of special symbols for conversion ............
Page 455: Menu List
Menu list ･ The menu differs depending on the menu display format (Menu Setting). ･ One-byte and two-byte characters shown on the display may differ from those below. : When the settings have been changed, the default settings are not restored by resetting. aMail b mode Menu item...
Page 456 gStationery ppli α Menu item Default Page Menu item Default Page a Software list a Scheduler P286 P367 ーー b Notepad ppli settings P387 α ー a Software sort c Alarm clock By download time P299 not set P365 b Auto start d Calculator P293...
Page 457 Menu item Default Page Menu item Default Page b Display c Security b Mail/Call image g Scanning function f Outgoing a Update Display image: Default P490 ー msg. P127 definition image b Scanning P490 g Incoming Display image: Default settings msg.
Page 458 iNW Services Menu item Default Page g Call Menu item Default Page a Noise a Voice mail reduction a Voicemail service b Reconnect High alarm a Activate Voice mail ー P399 alarm b Set ringing time ー P399 c On-hold tone Default tone, 保留音・ボイ...
Page 459: List Of Dial Keys And Character Assignments (5-Touch Input Method)
Menu item Default Page Menu item Default Page h Arrival call act i Others Answer P406 i Others f Service Dialing Number a Register USSD ー P407 a ドコモ故障問合せー P406 b Record reply message ー P407 b ドコモ総合案ー P406 c Remote control 内・受付...
Page 460: List Of Input Slots And Character Assignments (Slot Input Method)
List of input slots and character assignments (Slot Input Method) Input slot Hiragana/kanji mode Input slot Katakana mode Input slot Alphanumeric mode (two-byte) (one-byte) (one-byte) . / @ ~ ― : _ [ ￥ ] ^ ` { ｜ } 1 あ...
Page 461 ･ Common (20 items) おはようおやすみおはよー！今日も一日がんばりましょう。昨日は、とっても楽しかったです。どうもありがとう。連絡下さい。今から電話してもいいですか？ごめんなさい、遅れます。今日は○○の日です。早く帰って来てね。 ○○まで迎えに来て！お願いします。 ○○について知っている人は○○までに○○に教えて下さい。もう少し待ってて！いってらっしゃい。留守電にメッセージをお願いします。 ○○で待ってます。ただいま電話にでることができません。メールでご用件をお知らせ下さい。集合時間は○○、集合場所は○○です。今日は外で食べて帰ります。ご飯はいりません。メールありがとう。 ○○の写真送ります。最近の○○の写真です。･ Pleasure (20 items) 今なにしてるの？電話かメールを下さい。どこか、遊びに行こーよ！電話ちょうだい！電話番号は○○です。おくれちゃう、ゴメン！どこにいるの？集合！時間だよーん！！トラブル発生！！会いたい！...
Page 462: List Of Pictograms And Symbols
･ Others (20 items) またねー！今どこ？お誕生日おめでとう。おめでとう。まじでー！？まかせなさい！！キャンセル。いってきます。頑張って！ありがとう！ www. .ne.jp .co.jp .or.jp .ac.jp .net .com .org .html http:// ･ Pictogram words (20 items) Pictogram words Meaning Pictogram words Meaning ハロー！ / またねごきげん (High spirits) (Hello! / See you.) ピース...
Page 463: List Of Special Symbols For Conversion
List of special symbols for conversion Enter the readings in the hiragana/kanji mode before conversion. Reading Symbol Reading Symbol Reading Symbol あーる㌃Ｒr きごう＜〈＞〉＠じゅうし @ ／ / 〃± あいＩｉじゅうしち々×≠÷≦ あるふぁ αΑ じゅうに ≧∴§＼∞ あんだーばーじゅうはち...
Page 464: List Of Pictograms For Conversion
Reading Symbol Reading Symbol Reading Symbol はいふん − へくたーる㌶めいじ㍾ h Ⅷ はちべーた βΒ めす ♀ はてな？ぺーじ㌻やじるし →←↑↓ ⇒⇔ ぱい Ππ ほし ☆★ ゆーＵｕばつ × まいなす − a b c d ゆう...
Page 465: Kuten Code Input List
KUTEN code input list ･ Some of the following may look different from the displayed ones. 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit...
Page 466 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit Next...
Page 467 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit...
Page 469: Combination Of Operations During Multiaccess
Combination of operations during Multiaccess The following table shows whether or not a process that is generated or to be performed can be operated when any other operation is in progress: Processes that occur or are Voice call Video-phone call i-mode i-mode Mail performed...
Page 470 Processes that occur Data or are performed 64K data Packet transmission communication communication (infrared communication) Current status Send Receive Send Receive Send Receive Send Receive × * During a voice call ○ * ○ × ○ ○ × × During a video-phone ×...
Page 471: Combination Of Functions During Multitask
Combination of functions during Multitask Whether or not selections made in New Task menu can be combined with the currently run or set function is described in the following table: ○ : can be selected × : cannot be selected a Mail b mode New Task menu...
Page 472 ○ : can be selected × : cannot be selected d Phonebook & Logs e Data Box f Tools g Stationery 0 New Task menu item a b c d Answer machi n e/ e a b c a b c d a b c Voi c e memo ...
Page 473: Services Available For Foma Terminal
FOMA In-Car Hands-Free Cable 01 *1 The earphone jack converter adapter P001 is required. *2 In-Car Hands-Free Cable 01 is required to connect to FOMA D701i. Note: The miniSD memory card is not included in the bundle and needs to be purchased. ☛P328...
Page 474: About The Data Link Software
About the data link software The FOMA D Series Data Link Software can be used to transfer data such as Bookmark between your FOMA terminal and a connected PC. You can install the FOMA D Series Data Link Software from the attached CD-ROM or download it from the following web sites: http://www.MitsubishiElectric.co.jp/d701i/ ●For details on the installation of data link software, see “README_DL.TXT”...
Page 475: Playing Video Data Downloaded From The External Devices On Foma Terminal
File format SD-Video (ASF) Encoding method Video: MPEG-4 Sound: G.726 ･ Some ASF files may not be playable. ･ To play a video stored in the miniSD memory card, you need to save the video data to fixed folders using the supplied data link software, etc. The miniSD memory card folder structure ☛P329 In case the saved video data are not displayed, update the miniSD memory card information ☛P338 ･...
Page 476 ･ The music data protected by the copyright law cannot be replayed on FOMA terminal. ･ When downloading sound data via Internet websites, etc., confirm usage conditions (license or prohibited act, etc.) before use. ･ Tunes saved in the miniSD memory card are for personal use only. You must not infringe on intellectual property rights of a third party such as the copyright and other rights.
Page 477 Confirm the converted file name and click [OK]. Select the music file and click on the tool bar. ･ Multiple music files can be selected. Confirm the contents of a confirmation screen and click [OK]. Select the drive in the miniSD memory card and click [OK]. The music file is stored in the miniSD memory card.
Page 478: Troubleshooting Troubleshooting
Troubleshooting Troubleshooting • Check if updating software is required first and perform Software Update if necessary. ☛P485 ●After dialing a number, you hear busy signals Power supply and charging and cannot establish your call. ･ Have you dialed the area code? ☛P52 ●FOMA terminal cannot be turned on ･...
Page 479 ●When there is an incoming call, the call ●The display is dim. indicator operates in a lighting pattern and Is the brightness in Display Light Setting set to Low? ☛P128 lighting color not set. ･ If a lighting pattern or lighting color is set for multiple ●The lighting for the display and dial keys does functions, the call indicator operates depending on the not go ON.
Page 480 ●Names are not displayed or ring tone does not ●The image and video is displayed as sound at the time of mail reception even though they have been registered in the phonebook. If the data has been destroyed, it cannot be correctly ･...
Page 481 ●Content length exceeds ●Failed to connect. ●i-mode Mail service is busy. replayable size for i-motion Because the receiver sets Caller ID Please try again later.(555) Reception was suspended because Request Service on for outgoing The i-mode Center is busy. Please the data size exceeds 500 Kbytes video-phone, connection is try again later.
Page 482 ●Infrared ●Invalid UIM, requested ●Message kept in center. No response. Initiate data service not available. SMS messages have already been exchange? You tried to display/play back data sent. After entering into the infrared downloaded from i-mode or Internet ●Message rejected by communication state, 5 or more web site or saved from attachments recipient.
Page 483 ●No miniSD card found. ●Page is not found. (404) ●Replay period has not yet Unless a miniSD memory card is Unable to find i-mode or Internet started. inserted to FOMA terminal, still web site. Make sure that the URL is Unable to play because of the term images or videos recorded with the correct.
Page 484 ●Signature space is not ●Terminal memory full. ●This software is presently available. Copying/moving selected items, out of use. ･ When i-mode Mail with a message copying/moving all items and Using the i- ppli is stopped by IP α and a signature includes more restoration of data is unavailable (Information service provider).
Page 485 ●Unable to display image. ●Unable to update pattern Unable to display because original definitions. file for the image to be attached Updating the definition file has failed. cannot be found or the image Stop all other functions currently contains error. Check the image. running and retry the update in a place with strong radio wave signals.
Page 486: Example Of Error Messages
Warranty and After-Sales Service Warranty ･ A written warranty is provided with every FOMA terminal; make sure that you receive it. Store the warranty in a safe place when you have read it and checked that it contains the “shop name/ date”...
Page 487 ・ In order to prevent interference of radio waves or network breakdown, the FOMA terminal and UIM are manufactured according to technical standards stipulated by law. Do not use FOMA terminals or UIMs that do not meet these standards. ・ If the FOMA is modified (part replacement, modification, painting, etc.) it will be repaired only after the modified parts have been restored to the condition at the time of purchase.
Page 488: Updating Software
Updating Software Software Update This function checks for the necessity for updating FOMA terminal software and downloads part of the software as required through packet communication* to make updates of the software. When software update is required, the information will be posted in “ お知らせ＆ヘルプ (Notice & Help)”...
Page 489 ● Software update can be done while various data, such as phonebook data registered in FOMA terminal, camera images, downloaded data are retained; however, note that data protection sometimes cannot be secured according to the conditions of your FOMA terminal (such as malfunction, damage, or water leak). DoCoMo recommends to back up necessary data.
Page 490 Select Now update and press o. Downloading is started and the call indicator flashes. Press o to cancel downloading. If downloading is canceled halfway, the data downloaded up to ･ then is deleted. ･ After starting downloading, updating process is executed without the operation of selecting the menu.
Page 491 Select Reserve. Inquire the option for preferred day and time by communicating with the server. ･ Available date and time for reservation will be shown by the time of the server. Select preferred day and time. ■ Selecting from the options displayed a Select preferred day and time and select Yes.
Page 492: Protecting Foma Terminal From Hazardous Data
Checking/changing/canceling reservation Press m896 on the stand-by display. Enter the terminal security code and check the contents. ･ Select OK to stop checking. ■ Changing reservation a Select Change and press o. The option selection screen is displayed. ･ Follow the procedure from Step 2 in “Updating software at pre- specified time”.
Page 493 ･ Pattern definition used for checking needs to be upgraded, because it is updated whenever a new trouble is detected. ･ Virus Scan Function is for preventing the data that cause some problem to mobile phone from invading when viewing websites or receiving mail. Please note that if pattern definition corresponding to specific troubles has not been downloaded to the mobile phone or such pattern definition does not exist, this function cannot prevent the trouble from happening.
Page 494 Displaying the scan result When displaying a list of detected problem elements a Select Detail while a warning message is being displayed. The list of the name of problem elements detected by scan is displayed. ･ When 6 or more problem elements have been detected, the names of the 6th and subsequent problem elements are omitted and the total count of the detected problem elements is displayed.
Page 495 Scan Version Press m8373 on the stand-by display. SAR certification information This model phone FOMA D701i meets the MIC’s * technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and through evaluation of scientific studies.
Page 496 MEMO...
Page 497 MEMO...
Page 498 MEMO...
Page 499 MEMO...
Page 500 MEMO...
Page 501 MEMO...
Page 502 MEMO...
Page 503 MEMO...
Page 504 MEMO...
Page 505 MEMO...
Page 506 INDEX/Quick Reference Manual INDEX......................504 Quick Reference Manual ................508...
Page 507 INDEX Checking........ Chat Mail Continuous call time ....Broadcast address....Call Forwarding Service .... Chat Member Setting..... Add Address ......Call indicator........ Composing ......Added Service ......Deleting ......... Call Waiting Service ....Adjust volume ......Edit chat members....Caller ID Notification....After-Sales Service....
Page 508 Save from mail ....... Trace information ....Save from site ......Upgrade ......... Set as stand-by image ... Use Bar Code Reader.... Earphone/microphone jack ..Settings ........Use Camera......Earphone/microphone set with switch Shooting ......... Use infrared communication Connecting ................
Page 509 Mail Setting (FOMA terminal) ..Noise Reduction ......PIN1 Code ON/OFF ....Mail Setting (i-mode Center)..Notepad ........PIN1 code/PIN2 code ....Mail templates ......Notification (Voice Mail)..... Changing ....... Play Sound ........ Mail To (Mail) ......Nuisance Call Blocking Service ...........403 Mail To (Site) ......
Page 510 Schedule ........ TASK key ........Scanning Setting....Secret Code Setting ....Template ........Update Definition ....Voice call ( → Phone) Secret Mode....... Downloading ......Security code ......Read Template ...... Voice Mail Service ..... Security Scan ( → Virus Scan Save Template.......
Page 511 Quick Reference Manual Use Quick Reference Manual included in this manual as follows. Dotted line Cut along the dotted line. ● Be careful not to hurt yourself when Fold the sheet along the line so that the cutting. front cover is on top.
Page 516 Mobile phone etiquette When using your FOMA terminal, always be considerate of your environment and those around you. Turn the power off in the following situations ■In prohibited areas Use of mobile phones in the following places is prohibited. You must turn the power off. ・Airplanes ・Hospitals You must also turn the power off when in lobbies or waiting rooms of hospitals as there could be people in such areas who could be adversely affected by mobile phone signals.
Page 517 Manufacturer: MITSUBISHI ELECTRIC CORPORATION To prevent damage to the environment, bring used battery packs to an NTT DoCoMo service counter, an NTT DoCoMo agent or a Made from 100% recycled recycle center. This manual is printed using an ink paper.

NTT docomo FOMA D701I Manual

How to Use and Refer to this Manual

Table of Contents

Danger

Before Using D701I

Making/Receiving Video-Phone Calls

I- Α Ppli

Displaying/Editing/ Managing Data

Data Communication

Appendix/Data Interchange/ Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for NTT docomo FOMA D701I

Summary of Contents for NTT docomo FOMA D701I

Table of Contents