NTT docomo FOMA N702iS Manual page 75

<Volume>
Adjusting the Earpiece Volume
You can adjust the earpiece volume to a setting between "Level 1" (quietest) and "Level 6" (loudest) during a
call.
● If you adjust the volume during a call or while the FOMA terminal is in standby mode, the adjusted setting is
retained after you end the call.
<Example: During a voice call>
During a call Use a(
1
Ｖｏｌｕｍｅ
Ｌｅｖｅｌ ４
N
You can also adjust the earpiece volume while talking on videophone or in hands-free mode.
Adjust the volume by pressing f or g during a videophone call. You cannot adjust the earpiece volume in succession, even if you
press and hold a( ) or s(MEMO/CHECK) for 1 second or longer during earpiece volume adjustment.
<Ring volume>
Adjusting the Ring Volume
You can adjust the volume of the ring tones the FOMA terminal uses when you receive a voice call,
videophone call, mail, chat mail, Message R/F. There are six volume settings for each type of call. You can also
set to silent or to gradually get louder (step).
i50 Select the item of which you want to adjust the ring volume
1
Select "Phone" to adjust the ring tone volume for voice calls and 64K data communication.
Select "Mail" to adjust the ring tone volume for i-mode mail, SMS or packet communication.
Use c to adjust the ring volume
2
■ To set step tones
In the "Level 6" setting, press f
When you receive a call with "Step" setting, there is no ring tone, then the ring tone becomes gradually louder,
starting at "Level 1" and increasing to "Level 6" every 3 seconds.
■ To set to silent
In the "Level 1" setting, press g
When the ring tone is set to "Silent", the FOMA terminal emits no ring tone.
An icon appears in the standby screen to confirm that a "Silent" ring tone is set.
："Silent" is set for "Phone" and/or "Video-phone" calls.
："Silent" is set for more than one of "Mail", "Chat mail", "MessageR" or "MessageF".
： Both " " and "
N
The ring volume setting specified for "Phone" in this function is also applied to the "Select ring tone" setting for a voice call, the alarm
tones for "Schedule" and "ToDo" events.
) or s(MEMO/CHECK) to adjust the volume
You can adjust the volume in the same way by holding down f or g for 1 second or longer.
You can adjust the volume in succession by pressing
or longer during earpiece volume adjustment.
If no operation is conducted for 2 seconds or longer when the earpiece adjustment screen is
displayed, the FOMA terminal ends the volume adjustment and returns to the in-call screen.
■ To adjust the earpiece volume in standby mode
On the standby screen
You can adjust the volume in succession by holding down
If no operation is conducted for 2 seconds or longer when the earpiece adjustment screen is
displayed, the FOMA terminal ends the volume adjustment and returns to the in-call screen.
" are set.
a
( ) or
f or g (for 1 second or longer) f or g
Default setting
Level 4
s
(MEMO/CHECK) for 1 second
f g
or for 1 second or longer.
Default setting
Level 4 (All)
73