NTT docomo FOMA N702iS Manual page 40

Menus which switch alternately
Depending on the menu, menu items switches alternately as the following example:
<Screen example 1>
When rear camera is used
Ｆｕｎｃｔｉｏｎ
１／３
Ｆｒｏｎｔ ｃａｍｅｒａ
ＣＨＧ ｃａｍｅｒａ−ｍｏｄｅ
Ｓｅｌｅｃｔ ｓｉｚｅ
Ｆｉｌｅ ｓｉｚｅ ｓｅｔｔｉｎｇ
Ｓｔｏｒａｇｅ ｓｅｔｔｉｎｇ
Ｌｉｇｈｔ
Ｉｍａｇｅ ｑｕａｌｉｔｙ
* When the shooting screen is displayed on the FOMA terminal and "Rear camera" is used, "Front camera"
appears as in <Screen example 1>. If you select "Front camera" at this point, the FOMA terminal switches to
"Front camera" mode, and "Rear camera" appears the next time the function menu is displayed.
■ Description of the menus which switch alternately
Such menus are described as
Description of operations
In this manual, instructions for menu operations are briefly described in almost all cases as follows:
The example of description of operations and the actual operations
i
"Alarm clock"
1
1 2
①
: Press the key.
: Press b to move the highlight to the menu icon, and then press d (Select).
②
: Press b to move the highlight to the double quoted item, and then press d (Select).
③
Or, press 1 to 9 for the menu number of the double quoted item.
: Press b to move the highlight.
④
⑤ : Press the function key for the software key in parentheses.
Notation
■ Omission of d in the "Select" and "Set" operations
・When a target function is selected from icons or list, such as example
・In the cases such as "Select an item" or "Enter your security code", d (Select) and d (Set) are omitted in the
same way.
* When you are supposed to move to the next step without pressing d (Select), "Highlight" is used, such as
example ④ above.
■ Easy operations are preferred
・For some operations, you can operate the same function in several ways. In these cases, this manual gives prior-
ity to the operations by software key operations (
・When you select a function from the icons on the main menu, refer to "Menu Function List" (P.358).
■ Omission of the descriptions after completing the operations
・The descriptions for the operations after completing the function are omitted. Press y to return to the standby
screen, or press t to return to the previous screen.
38
<Screen example 2>
When front camera is used
Ｆｕｎｃｔｉｏｎ
１／３
Ｒｅａｒ ｃａｍｅｒａ
ＣＨＧ ｃａｍｅｒａ−ｍｏｄｅ
Ｓｅｌｅｃｔ ｓｉｚｅ
Ｆｉｌｅ ｓｉｚｅ ｓｅｔｔｉｎｇ
Ｓｔｏｒａｇｅ ｓｅｔｔｉｎｇ
Ｌｉｇｈｔ
Ｉｍａｇｅ ｑｕａｌｉｔｙ
⇔
"Front camera Rear camera".
Highlight the item to be set
3
P.34
) or menu number (P.33).
o (Edit)
4
above, d (Select) is omitted.
② and ③
5