NTT docomo FOMA N702iS Manual page 299

Using the Infrared Remote
Control Function
● Download the appropriate software for the product
you want to control. Note that even the correct
software may not support the product and cannot be
controlled by the FOMA terminal.
● When you use the built-in G ガイド番組表リモコン
(G-GUIDE program guide remote control), see P.257.
● You cannot use the Infrared Remote Control during
the Self mode.
Using remote control
● Point the infrared data port of the FOMA terminal
directly at the remote control sensor on the TV, etc. to
use the FOMA terminal as a remote control. The
remote control is effective within four meters away
from the product. This may vary depending on the
ambient light level.
Within the Within the
range of ±15° range of ±15°
Infrared sensor
Within 4 m
Infrared data
port
<OBEX>
Forwarding Data by Cable Connection
By connecting the FOMA terminal and your PC with
the FOMA USB Cable (optional), you can exchange
various data such as phonebook entries or images.
● You can forward the followings:
・Phonebook
・Schedule/ToDo/Holiday/Anniversary
・Mail (i-mode mail/SMS)
・Text memo
・Melody
・My picture/i-motion
・Bookmark
● When you exchange data using the FOMA USB Cable
(OBEX), you have to install "Data Link Software"
(P.379) and "N702iS Communication Setting File" in
the provided CD-ROM.
● For details on installing "Data Link Software" and the
operational environment, refer to the website for the
Data Link Software download.
● For details on installing "N702iS Communication
Setting File" and the operational environment, refer to
"Data Communication" chapter (P.339), "N702iS通信
設定ファイルの説明 (About N702iS Communication
Setting File)" in the provided CD-ROM or "N702iS
Manual for Data Communication" (PDF format).
● For details on how to exchange data, refer to the help
files of the Data Link Software.
■ Important
Ensure that the FOMA terminal and PC are properly
connected. An improper connection could not only prevent
data exchange but also result in the loss of data.
Attempting to exchange data when the FOMA terminal's
battery level is low or empty could not only prevent data
exchange but also result in the loss of data. Make sure that
the FOMA terminal's battery is charged enough. Also check
the power of PC.
All the data on the FOMA terminal may be erased if an error
occurs while forwarding all from PC to the FOMA terminal.
Before forwarding all, check the cable connection, the
battery level of the FOMA terminal and the power of PC.
297