Recording Voice - NTT docomo FOMA N702iS Manual

Recording your own voice in standby mode
i43
"YES"
1
memo
When the FOMA terminal beeps, begin speaking into
the mouthpiece. The FOMA terminal beeps as a
warning 5 seconds before the recording time (around
20 seconds) ends. When recording ends, the FOMA
terminal gives a short double-beep and the "Recording"
display changes back to the "LifeKit" list screen.
■ To stop recording in progress
d(Stop), t or y
Pressing y returns to the standby screen but the
voice is recorded.
■ Important
It is recommended to take notes of the contents of the voice
memo.
Recorded Voice memo can also be lost as a result of faults,
repairs, modification or other handling of the FOMA terminal.
Note that NTT DoCoMo
whatsoever for any loss of data.
<Voice announce>
Recording and Playing Alarm
Tones and On Hold Tones
You can record the voice and use it as original ring
tone or answer message.
● You can make 2 voice recordings: "Voice announce 1"
and "Voice announce 2".
● You can record voice up to about 15 seconds.
● Voice recordings made using this function can be set
in the following functions:
・Ring tone of voice calls/videophone calls/multi
numbers
・Ring tone of mails
・Ring tone of Message R/F
・Ring tone for Call setting w/o IDs
・On hold tone
・Holding tone
・Answer message of Record message
・Alarm clock alarm tone
・Schedule alarm tone
・ToDo alarm tone
・Notify cost limit alarm tone

Recording voice

i91
Select an item
1
"Record" Record voice
2
Speak into the mouthpiece. The FOMA terminal beeps
as a warning 5 seconds before the recording time
(about 15 seconds) ends. When recording ends, the
FOMA terminal gives a short double-beep and the
"Recording" display returns displayed to the original
screen.
Record voice
accepts no responsibility
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ １
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ ２
■ To stop recording in progress
d(Stop), t or y
Pressing y returns to the standby screen but the
voice is recorded.
N
When there is already a voice recording, a message appears
notifying you that there is an existing recording, then a new
recording is made and the existing recording is overwritten.
If you receive a call, use another function or the FOMA
terminal notifies you of an "Alarm clock", "Schedule" or
"ToDo" alarm while you are making a voice announce
recording, the recording stops.
Playing and erasing voice announce
recordings
i91
Select an item
1
Select "Play" or "Erase"
2
■ To stop playback in progress
d(Stop), t or y
<Call data>
Checking Call Times and Charges
You can check the previous or total call time/charge
for voice/videophone calls, etc.
● When you switch between voice call and videophone
call, the total call time of voice and videophone calls
is displayed in the last duration area, and the charges
of voice and videophone calls are displayed
separately in the last charge area. The displayed
charge may differ from the actual charge.
● The call time is displayed for both voice calls and
digital calls and communication (videophone calls
and 64K data communication). Times for both calls
made and received calls are counted.
● Charges are only displayed for dialed calls. However,
if you call at toll free number such as directory
assistance (104), "￥0" or "￥
● As charges are accumulated on the FOMA card
(UIM), the accumulated charge (starting from
December 2004) is displayed on the Charge line even
if you change your FOMA card (UIM).
* Charges are accumulated on FOMA cards (UIM) in FOMA
terminals released before the 901i series, but they cannot be
displayed.
● You can reset displayed call times and charges.
● Displayed call times and charges may differ from the
actual figures. Consumption tax is not included in the
call costs.
Continued on next page
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ １
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ ２
∗∗
" is displayed.
313