Changing The Certificate Host - NTT docomo FOMA N702iS Manual

■ Notes on using FirstPass
・FirstPass is DoCoMo's
service. Using FirstPass
authentication in which the site authenticates the
FOMA terminal.
・FirstPass can be used either when the FOMA ter-
minal is directly connected to the Internet or when it
is connected via a PC. When the FOMA terminal is
connected to the Internet via a PC, the FirstPass
PC software included in the bundled CD-ROM for
FOMA N702iS is required. For more information,
refer to the PDF-format "FirstPassManual" con-
tained in the "FirstPassPCSoft" folder on the CD-
ROM. (The "FirstPassManual" is in Japanese only.)
To view the PDF-format "FirstPassManual", you will
need Adobe Reader
recommended).
If this software is not installed on your PC, install
the Adobe Reader in the provided CD-ROM to view
the file.
Refer to the help of the Adobe Reader for details on
how to use it.
・When requesting a user certificate, carefully read
and agree to the "The usage regulation" of
FirstPass displayed
proceeding with your request.
・To use a user certificate, you will need to enter your
PIN2 code (P.140). Take great care to prevent
unauthorized persons from using your FOMA card
(UIM) or PIN2 code since all the actions performed
subsequent to PIN2 code entry will be assumed to
have been performed by you.
・If your FOMA card (UIM) is lost or stolen, you can
have your user certificates invalidated at NTT
DoCoMo Information counter on the backcover of
this manual.
・NTT DoCoMo is not responsible for and accepts no
liability whatsoever regarding the sites or the
content provided by FirstPass-compliant sites. Any
disputes are to be resolved between the customer
and the FirstPass-compliant site.
・NTT DoCoMo and its authentication company
provide no guarantee regarding security or secrecy
in the use of FirstPass and SSL certificates. Such
certificates are used entirely at the discretion of the
user.
202
digital authentication
enables the client
(version 6.0 or later
on your screen before

Changing the Certificate Host

Default setting DoCoMo
* There is normally no need to change this
setting.
You can set the host for downloading the user
certificate.
i
1 "Connection setting"
"Certificate host"
Highlight "<Not recorded>"
2
(Edit) Enter the security code
Select any item:
Default URL ......Sets the URL of the initial screen for
the host. You can enter up to 100 half-pitch characters.
Host number......Sets the host number. You can enter
up to 99 half-pitch characters.
Set the respective parameters
3
(Finish)
N
To change a stored "User setting host", use the same
procedure for storing.
To delete a stored "User setting host", select "Delete" from the
function menu.
o
o