NTT docomo FOMA N702iS Manual page 314

Storing personal data
Own number screen (P.311)
1
(Edit) Enter your security code
Select any item:
2
Name ......Enters your name. You can enter up to
16 full-pitch or 32 half-pitch characters which include
kanji characters, hiragana,
numbers and pictographs.
Reading ......Enters the reading for your name.
The Reading is entered automatically when you enter
your name. Change it if necessary. You can enter up to
32 characters which include half-pitch katakana,
alphabets, numbers and symbols.
......Adds a phone number other
Phone number
than the FOMA terminal's own number and selects an
icon. You can enter up to 26 digits for the phone
number.
When you store a new phone number, the "
stored>" option appears in the personal data edit
display. Select this option to store an additional phone
number.
......Enters the e-mail address and
Mail address
selects an icon. You can enter up to 50 half-pitch
alphabets, numbers and symbols.
Once you have stored the first e-mail address, the "
<Not stored>" option appears on the personal data edit
screen. Select this option to store an additional e-mail
address.
Address ......Enters the postal code and address.
Postal codes can consist of up to 7 half-pitch numbers.
You can enter up to 50 full-pitch or 100 half-pitch
characters which include kanji characters, hiragana,
katakana, alphabets,
pictographs.
Birthday......Enters the birthday (year, month and
day).
Any year from 1800 to 2099 can be set.
......Enters a memo (short note).
Memorandums
You can enter up to 100 full-pitch or 200 half-pitch
characters which include kanji characters, hiragana,
katakana, alphabets,
pictographs.
......Selects/releases the image displayed
Image
when you display your personal data.
3 Set the respective items
312
o
katakana, alphabets,
<Not
numbers, symbols and
numbers, symbols and
o(Finish)
N
The mail address changed with this function is the address
displayed in the own number screen. The actual mail
address is not changed.
<Voice memo (during a call) / Voice memo (in stand-by)>
Recording Your and the Other
Party's Voice
There are two types of Voice memo. In-call "Voice
memo" allows you to record the other party's voice
during a voice or videophone call. Standby "Voice
memo" allows you to record your own voice while
the screen is standby.
● You can record only one In-call Voice memo or
Standby Voice memo. Each time you record a voice
memo, it overwrites the existing voice memo.
● You can record for about 20 seconds.
● For information on playing and erasing recorded
voice memos → P.81
Recording the other party's voice during a
call
You can record the other party's voice during a voice
call or videophone call. A single key press allows
quick and easy recording of important calls.
During a call
1
(for 1 second or longer)
The FOMA terminal beeps
and recording begins. The
FOMA terminal beeps as a
warning 5 seconds before the
recording time (around 20
seconds) ends. When recording
ends, the FOMA terminal
gives a short double-beep and
the "Recording" display returns
to the in-call screen.
■ To stop recording in progress
d(Stop), t, y or s (MEMO/CHECK)
(for 1 second or longer)
Pressing y also ends the call.
Pressing t does not stop recording during
videophone call.
N
If you receive a call, use another function or the FOMA
terminal notifies you of an "Alarm clock", "Schedule" or "ToDo"
alarm while you are making a voice memo recording,
recording stops.
You cannot record while a videophone call is on hold or while
you are using a Function menu option.
While you are holding a voice call, you can record the call by
following the steps below:
i
"Voice memo"
s (MEMO/CHECK)
Ｒｅｃｏｒｄｉｎｇ
１０／１９（Ｔｈｕ）１７：２３
Ｓｔｏｐ