NTT docomo FOMA N702iS Manual page 434

About the FOMA PC Setting Software
By using the FOMA PC setting software, you can easily set up the followings:
d You can also set up packet communication and 64K data communication without using the FOMA
PC setting software. → p.30
See p.6 for the connection between the FOMA terminal and PC.
かんたん設定 (Easy settings)
The guide walks you through the procedures for "FOMAデータ通信用ダイヤルアップの作成 " (Making a new
dial-up connection for FOMA data communication) and "W-TCP設定 " (W-TCP settings) together.
W-TCP設定 (W-TCP settings)
This settings optimize the communication settings of a PC before using "FOMA packet communication".
To get the most out of communication performance, it is necessary to optimize communication settings by
making W-TCP settings.
接続先（APN）の設定 (Access Point Name (APN) settings)
Sets the access point name (APN) required for packet communication.
Unlike 64K data communication, a normal phone number is not used for FOMA packet communication
access point. Before you connect, register the APN (Access Point Name) of each access point in the FOMA
terminal and assign its registration number (cid) to the connection point phone number field.
As the APN of mopera "mopera.ne.jp" is assigned to cid1 and APN of mopera U "mopera.net" to cid3 by
default, assign the APN to cid2 or between cid4 to cid10.
cid [Context Identifier] ... a number used to manage the Access Point Name (APN) for the packet
communication registered in the FOMA terminal. It is set when registering the APN in the FOMA terminal.
13