Running I-Αppli From Sites Or Mail; I-Αppli To Function; And Time - NTT docomo FOMA N702iS Manual

o (Finish)
Set the launch date
2

and time

■ To set the launch date and time
Select an item for "Date setting" Enter the
launch date and time
■ To set repeated automatic launch times
Select an item for "Repeat" setting "Daily" or
"Weekly"
If you select "Weekly", use c to select a checkbox
( □ ) and press o(Finish).
o (Finish)
3
N
If you set the "Time interval set" and "Start time set" for the
same software application and these automatic launch times
are less than 10 minutes apart, the software will launch
automatically for the first launch time but not for the second.
Checking whether an i-αppli launched
automatically
You can check whether an i-αppli automatically
started up at the specified time.
i
"i-αppli info"
1
start info"
The screen displays information
such as the software application
name, the automatic launch time
and whether or not the software
was launched. "Start ○ " indicates
that the software started up automatically, "Start × "
indicates that it did not start up automatically and
"Start-" indicates that the time for automatic launch has
not yet been reached.
N
If the software could not be launched automatically, the "
(Not run soft) icon appears on the standby screen. Select the
icon to view the auto start info screen. Select the software to
launch it. Desktop icons that provide information→ P.134
The information is also stored when the application could not
be launched automatically because you are using i-mode or
running another software application.
"Auto start info" may include the information for the software
you did not realize its launch.
258
<i-αppli To function>
Running i-αppli from Sites or Mail
Ｓｔａｒｔ ｔｉｍｅ ｓｅｔ
You can launch an i-αppli from a function other than
２００６／１０／１９ １８：００ i-αppli, such as an i-mode site or mail.
１ ｔｉｍｅ
Enabling software launching with i-αppli To
<Set i-αppli To>
Default setting
You can specify whether i-αppli software can be
launched from i-mode sites, mail, the Infrared data
exchange function or Bar code reader.
● This setting can be specified separately for each
software application.
1
2
Launching i-αppli from a site
When an i-αppli software launch specification is
displayed on an i-mode site, this setting allows the
software to be launched from the site.
● This function cannot be used with some sites.
1
"Auto
N
Unlike ordinary i-αppli, some i-αppli software is immediately
Ａｕｔｏ ｓｔａｒｔ ｉｎｆｏ
launched from an i-mode site.
Ｓｔｏｃｋ ｐｒｉｃｅｓ
２００６／ ９／ ３ １５：３０Ｓｔａｒｔ○
・ These i-αppli are not stored on the FOMA terminal after
Ｇａｍｅ ２
２００６／ ９／ ３ １８：２１Ｓｔａｒｔ×
・ A message may appear after the software is activated to
・ After the software quits, a message may appear asking
・ Some i-αppli software cannot be stored on a FOMA terminal.
" Launching i-αppli from a mail
When an i-αppli software launch specification is
pasted into a received i-mode mail, this setting allows
the software to be launched from the i-mode mail.
1
N
If multiple data items are pasted into the mail, the pasted data
itself may not be displayed.
The i-αppli launch specification cannot be quoted even when
you reply with a quote or forward the i-mode mail. You cannot
quote a launch specification of an i-αppli by forwarding mail
using the Data Link Software or the Infrared data exchange
function.
All activated
Software list screen (P.254)
(FUNC) "Set i-αppli To"
Use c to select a checkbox ( □ )
o (Finish)
Sites screen (P.183)
for launching the software
downloading from i-mode sites, and do not appear in the
software list screen either.
ask whether to use the FOMA terminal's communication
functions.
whether to store the software.
Received mail detail screen (P.231)
Select an item for launching the
software "YES"
p
Select an item
"YES"