NTT docomo FOMA N702iS Manual page 36

● How to use the software keys
To run a software key displayed at the bottom of the display, press the corresponding function key.
■ To run the software key
Press o to run the software key displayed in
1
includes (PI・SB), (Edit), (Store), (Finish), (Play), (
■ To run the software key
Press d to run the software key displayed in
2
includes (Select), (Set), (Play), (Change), etc.
■ To run the software key
Press p to run the software key displayed in
3
includes (FUNC), (Exit), etc.
Press p while (FUNC) is displayed to display the function menu. → P.37
*In this manual, operations related to the function keys are generally
described with the software key names in the parenthesis, such as o
(Edit), d (Select), and p (FUNC).
Accessing the functions from your original menu
You can easily access the frequently used functions by using the "Original menu".
● The contents of original menu is changed with "Original menu".→ P.127
Press i on the standby screen to display the main menu, then press i
1
in sequence
Pressing i switches between the main menu and the original menu.
i
N
When you return to the standby screen from the original menu, or when you call up a function from the original menu, press
display the original menu.
If no function is stored in the original menu, a message appears, asking whether you store functions to the original menu or not.
34
1
1
.
2
2
.
3
3
.
i
i
Ｓｅｌｅｃｔ
), etc.
Ｏｒｉｇｉｎａｌ ｍｅｎｕ
Ｏｗｎ ｎｕｍｂｅｒ
Ｃｈｅｃｋ ｎｅｗ ｍｅｓｓａｇｅｓ
Ｒｉｎｇ ｖｏｌｕｍｅ
Ｖｉｂｒａｔｏｒ
Ａｌａｒｍ ｃｌｏｃｋ
Ｃｈａｎｇｅ ｓｅｃｕｒｉｔｙ ｃｏｄｅ
＜Ｎｏｔ ｓｔｏｒｅｄ＞
＜Ｎｏｔ ｓｔｏｒｅｄ＞
＜Ｎｏｔ ｓｔｏｒｅｄ＞
＜Ｎｏｔ ｓｔｏｒｅｄ＞
Ｓｅｌｅｃｔ
1 2 3
Ｅｄｉｔ Ｓｅｌｅｃｔ ＦＵＮＣ
i
to